2. Home
  3. Home security & automation
  4. Sirens
  5. Abus
  6. SG1250
SG1250

Abus SG1250 Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Abus SG1250 Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ABUS Security-Center
SG1250
Inside siren
Product highlights:
• 110dB alarm tone
• LED for armed/disarmed indication
• Monitored against sabotage
The inside siren is installed inside your building. It is the last and
critical module of a complete alarm chain.
The inside siren is an acoustic signal generator. You have a choice
between two alarm modes in this case: A 110 dB alarm and a 90 dB
acknowledgement tone. Both signals are felt to be extremely loud
due to the high acoustic pressure and the signal frequency. The
remotely activated LED of the alarm siren can be used to detect the
status of the alarm center (armed/disarmed).
The rugged plastic housing (IP 54) of the acoustic signal generator is
protected against sabotage by a wall and cover contact. The inside
siren is powered with 12
V.
© 2012 ABUS Security-Center GmbH & Co. KG, Errors and omissions excepted.
ABUS Security-Center
SG1250
Inside siren
Technical Data
Degree of protection IP54
Volume 110 dB
Emergency power supply no
Emergency power battery no
Temperature range -10 to +50°C
Sabotage monitoring Wall/ceiling
Lamp type LED
Flashing frequency -
Operating voltage 12 VDC
Current consumption,
standby
33 mA
Current consumption,
alarm
300mA
Power consumption 3.6W
Dimensions (WxHxD) 100x155x48 mm
© 2012 ABUS Security-Center GmbH & Co. KG, Errors and omissions excepted.
/