STEP 1.
STEP 4.
STEP 2.
STEP 3.
COMPLETED
Page 2
A
B
C
H
I
L
E
H
F
H
I
D
K
H
I
J
J
K
G
H
K
G
H
PARTS LIST
A. Left armrest 1pc
B. Right armrest 1pc
C. Connect 1pc
D. Backrest 1pc
E.Seat plate 1pc
F. M6 x 15 bolt 4pcs
G.M6 x 45 bolt 4pcs
H. 6 metal washer 16pcs
I.M6 nut 8pcs
J. 6 plastic washer 4pcs
K.M6 small cap 8pcs
L. M6 large cap 2pcs
Φ
Φ
ASSEMBLY STEP:
Note: Leave nuts half-tightened on the chair during assembly until
unit is completely assembled, then finish tightening all nuts.
Step 1: Insert the connect (C) into the left armrest (A) and right
armrest (B).
Step 2: Attach the backrest (D) to seat plate (E) with 4 M6 x 15
bolt (F), 8 6 metal washer (H) and 4 M6 nut (I).
Step 3: Attach the backrest and seat plate assembly to the armrest
assembly, insert 1 M6 x 45 bolt (G), thru 6 metal washer (H),
armrest (B), 1 6 plastic washer (J), seat plate (E), 1 6 metal
washer (H) and 1 M6 nut (I).
Repeat the same procedure for the other side.
Step 4: Insert 1 M6 x 45 bolt (G), thru
armrest (B), plastic washer (J), backrest (D) , 1 6
metal washer (H) and 1 M6 nut (I).
Repeat the
same procedure for the other side.
then
cover the bolt with 1 M6 small cap (K).
then cover the bolt with 1 M6 small
cap (K).
6 metal washer (H),
then cover the bolt with 1 M6
small cap (K) and cover the nut with 1 M6 large cap (L).
Φ
Φ
Φ
Φ6 Φ
Φ
Φ
Page 1
If you have any questions regarding assembly of this product, or need additional
parts, please contact NSI at 1-877-998-1697 from 9:00AM to 5:00 PM EST
View the expanded assortment of outdoor living product on-line at
WWW.kmart.com and WWW.sears.com
Tools Required: Open end wrench provided()
Printed in China