BEFORE USE ....
Thank you for choosing M-System. Before use, please check
contents of the package you received as outlined below.
If you have any problems or questions with the product,
please contact M-System’s Sales Office or representatives.
■ PACKAGE INCLUDES:
Cable ....................................................................................(1)
■ MODEL NO.
Confirm Model No. marking on the product to be exactly
what you ordered.
■ INSTRUCTION MANUAL
This manual describes necessary points of caution when
you use this product.
POINTS OF CAUTION
• When you connect or disconnect the cable, be sure to hold
the connector body in order to protect the wires from
breakdown. DO NOT hold the cable in pulling it.
EXTERNAL DIMENSIONS & CONNECTOR PIN ASSIGNMENTS unit: mm (inch)
Pins No. B1 – B20 on Side A are not connected.
■ SIDE A CONNECTOR
■ CODE: 1
L
■ SIDE B CONNECTOR
6 (.24)
10.4 (.41)
14 (.55)
46 (1.81)
73 (2.87)
29.9
(1.18)
1
A18
2
3
4
5
16
A1
A2
A3
A4
A5
17
19
18
A16
A17
A19
20
FG
A20
FG
• Connector Pin Assignments
Side BSide A
A
20
B
20
1
19
2
20
A
1
B
1
• Wiring Diagram
Side BSide A
2-M3 solderless terminal
(FG: Green)
MCN201-FT1-20
2 m (6.6 ft.)
L
MCN201-FT1-30
3 m (9.8 ft.)
:
:
:
:
300
(11.81)
CABLE
(40-pin to 20-pin)
MODEL
MCN201
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
EM-9616 Rev.2 P. 1 / 2
INSTRUCTION MANUAL