2. Schneider Electric
  3. R10252GB Surface

Schneider Electric R10252GB Surface Instruction Sheet

  • Hello! I've reviewed the instruction sheet for the Surface Mounting Box EDM200E-SMB-KO. This document describes a mounting box with a transparent cover for easy address setting verification and visibility of LEDs. I'm ready to answer your questions about this device and its mounting process.
  • What is the product name?
    What is the model number?
    What are the dimensions?
    What is the protection class?
Internal
Surface Mounting
Box
EDM200E-SMB-KO
Instruction Sheet
R10252GB0
2 R10252GB0
Schneider Electric Fire & Security Oy
Sokerilinnantie 11 C
FI-02600 Espoo, Finland
Tel: +358 10 446 511
Website: www.se.com
Document number: R10252GB0
Published: 03.06.2021
© 2021 – Schneider Electric. All Rights Reserved. This information is only to be used as guidance. Subject to changes and errors.
Contents
R10252GB0 3
Contents
1 Surface Mounting Box ........................................................................... 4
1.1 Module Mounting Methods ........................................................................................................... 4
1 Surface Mounting Box
4 R10252GB0
1 Surface Mounting Box
Surface Mounting Box EDM200E-SMB-KO (FFS06717061) box has a transparent cover
that enables verification of address setting and visibility of LEDs, without cover removal.
1.1 Product Information
Dimensions (HxLxW): 40x134x139 mm
Protection Class: IP20
1.2 Module Mounting Methods
The 200 series addressable modules can be mounted by using the Surface Mounting
Box.
Surface mounting box M200E-SMB
A surface mounting box has a transparent cover.
Leds and address switches are visible through the
cover without opening the cover.
Surface mounting box base is affixed to the
mounting surface, and then the module and the
cover are screwed onto the base using the two
screws supplied.
Module
Cover
/