Z-WAVE SETUP
ADDING LUX Z-WAVE SENSOR INTO A
Z-WAVE NETWORK
REMOVING LUX Z-WAVE SENSOR FROM A
Z-WAVE NETWORK
ADDING LUX Z-WAVE SENSOR WITH Z-WAVE
SECURITY
*If your Z-Wave controller supports S2 Security 2
Authenticated encryption and DSK, enter the first
5 digits of the DSK printed at the bottom of the QR
image on the rear of LUX Z-Wave sensor.
TO FACTORY DEFAULT LUX Z-WAVE SENSOR
ADDING WITH SmartStart*
*Requires a SmartStart compatible controller and app. LUX
Z-Wave sensor must be within network range.