Potter SBK Seismic Bracket Kit Owner's manual

  • Hello! I'm your chat assistant and I've reviewed the provided document about the Potter SBK Seismic Bracket Kit. This product is designed to ensure battery stability during seismic events and is compatible with various Potter systems. I'm ready to answer your questions about it.
  • What is the purpose of the Seismic Bracket Kit?
    Is the kit suitable for all types of installations?
    What material is the seismic bracket made of?
    What is included in the kit?
SBK
Seismic Bracket Kit
5406325 - REV B 07/19 PAGE 1 OF 4
Potter Electric Signal Company, LLC St. Louis, MO Phone: 800-325-3936 www.pottersignal.com
Features
• Prevents battery movement during seismic events
• Use in new or existing installations
• Quick and easy installation
• SeismiccertiedandOSHPDapproved
• Worksforanysizebatteriesthattincabinet
Dimensions 14.25”Lx2”Wx1¼”H
Material 18 gauge cold rolled steel, Red
Standards OSHPD
Used with
Products
AFC-50, AFC-100, ARC-100, AFC-1000, IPA-
60, IPA-100 and IPA-4000
Description
Critical building systems in essential facilities must provide
continuedoperationduringseismicevents.Continuedoperation
fortherealarmsystemincludesbackuppower.Batteriesare
theprimaryformofbackuppowerandmustremainfunctional
in cases where the primary AC power is lost.  The Potter
SeismicBracketKitensuresthat,duringseismicevents,there
alarmsystembatteriesremainsecuredtopreventdisconnection
and movement that could damage systems components.  The
Seismic Kit is used on Potter Control Panels and Power
Supplies.
Applications include power generation, transportation hubs,
hospitals,nursinghomes,andotherhealthcarefacilities.
Technical Specications
firealarmresources.com
5406325 - REV B 07/19 PAGE 2 OF 4
Potter Electric Signal Company, LLC St. Louis, MO Phone: 800-325-3936 www.pottersignal.com
SBK
Seismic Bracket Kit
Dimensions
firealarmresources.com
5406325 - REV B 07/19 PAGE 3 OF 4
Potter Electric Signal Company, LLC St. Louis, MO Phone: 800-325-3936 www.pottersignal.com
SBK
Seismic Bracket Kit
Contents:
TheSeismicBracketKitshallcontain:
• Alcoholwipe
• Tape
• Bracket
• Installation instructions
Powerdownthepanelorpowersupplyandremovebatteryconnections.
Cleanthebackofthebracketandthebackofthecabinetwiththeprovidedalcoholwipe,(seeFigure1).Applytheadhesivetapetothebracket
ensuringthatthetapecoverstheentirebackofthebrackettotheedges,(seeFigure2).
Note:Oncetheadhesivetapeisappliedandthebracketismountedonthecabinet,itisextremelydifculttoremovethebracket,especiallywithout
damagingthebracketand/orcabinet.Consideraligningandmarkingthelocationpriortomountinginthecabinet.
Installation
Fig 1
Fig 2
firealarmresources.com
5406325 - REV B 07/19 PAGE 4 OF 4
Potter Electric Signal Company, LLC St. Louis, MO Phone: 800-325-3936 www.pottersignal.com
SBK
Seismic Bracket Kit
Movethebatteriesforwardinthecabinetandapplythebracketbehindthebatteries.Thebatteriesmayneedtobetiltedslightlyforwardduringthis
timeinordertotproperly.Movethebatteriesandthebrackettowardsthebackofthecabinetleavinganapproximately1/8”gapbetweenthetopof
thebatteriesandthebracketandapply(seeFigure3).
Ensurethatthebracketiscenteredinthecabinetandonthebatterieswithouttouchingtheterminalsontopterminalmountedbatteries.
Whenreplacingbatteries,pullfromthebackofthebatteryandtiltforwarduntilfreefromthebracket.Placenewbatteriesunderthebracket.
Fig 3
Ordering Information
Description Stock No.
Seismic Bracket Kit 3992364
firealarmresources.com
/