2. Iwata
  3. AP13FA

Iwata AP13FA User manual

  • Hello! I've reviewed the user manual for the Iwata AP136FA mini water dispenser. This manual provides instructions on how to use, maintain, and care for the product, including charging details and cleaning instructions for the hose and spout and the device has a dispensing button and blue LEDs to indicate water quality. I'm ready to answer any questions you may have about it.
  • Can I use this to pump hot water?
    Can I clean this by dipping in the water?
    What should I do before first use?
    How often should I sanitize the hose and spout?
100 mm
130 mm
LEARN MORE
Landlines.: 8282-5049; 8282-5098
Mobile Nos. 0908-8908597; 0917-3079188
Email: [email protected] / [email protected]
Website: www.colentco.com
1. Please do NOT use this product to pump alcohol or other
corrosive liquids such as oil or hot water over 40°C.
2. Please do NOT dip the product into water for cleaning.
3. A small amount of water may come out from the unit prior
to initial use and this is due to the quality control test done
by factory using clean water to ensure it is functioning normally.
1. Please CHARGE to full capacity prior to initial use.
1. Silicone hose & SS spout can be boiled for a few minutes prior
to initial use and after every 2 months for better hygiene.
3. Remove/dispense all excess water in the unit prior to storing
unit for an extended time period.
/