Bounty Hunter Quick Draw Pro Owner's manual

Brand: Bounty Hunter

Model: Quick Draw Pro

Type: Owner's manual

Bounty Hunter Quick Draw Pro is a powerful and versatile metal detector that can be used to find buried treasure, relics, coins, and other metal objects. It features advanced discrimination capabilities that allow you to ignore unwanted targets like iron nails and bottle caps, and its pinpoint mode helps you to locate buried objects with precision. The Quick Draw Pro is also lightweight and easy to use, making it a great choice for both experienced and novice treasure hunters.

OWNER’S MANUAL

Use 9-volt

ALKALINE batteries.

Do not use

“Heavy Duty” batteries.

Do not use

ordinary “Zinc Carbon” batteries.

TABLE OF CONTENTS

Congratulations!

Congratulations on the purchase of your new Bounty Hunter®Quick Draw®Pro

Metal Detector. The Quick Draw Pro is the result of nine years of software

engineering and features the latest advancements in lightweight design, target

accuracy and deep-penetrating detection technology.

The Quick Draw Pro can be used with its default turn-on-and-go settings, or it

can be programmed to your specific treasure hunting goals and objectives or

desired settings. Treasure hunting enthusiasts from around the world were

involved in the development of this revolutionary new detector. This manual

has been written to help you get optimal use of your detector so we hope you

will read it thoroughly before your first outing.

Happy Hunting from First Texas Products!

Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Batteries (use alkaline batteries only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Quick-Start Demonstration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

The Basics of Metal Detecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9

How to Work the Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

The Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-12

Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Discrimination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Notch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Pinpoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Target Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Depth and Target Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Using the detector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Characteristics & Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Treasure Hunter's Code of Ethics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

TERMINOLOGY

The following terms are used throughout the manual, and are standard

terminology among detectorists.

RELIC

A relic is an object of interest by reason of its age or its association with

the past. Many relics are made of iron, but can also be made of bronze

or precious metals.

IRON

Iron is a common, low-grade metal that is an undesirable target in certain

metal detecting applications. Examples of undesirable iron objects are old

cans, pipes, bolts and nails.

Sometimes, the desired target is made of iron. Property markers, for

instance, contain iron. Valuable relics can also be composed of iron;

cannon balls, old armaments and parts of old structures and vehicles can

also be composed of iron.

FERROUS

Metals which are made of, or contain, iron.

ELIMINATION

Reference to a metal being "eliminated" means that the detector will not

emit a tone, nor display a Target-ID, when a metal object passes through

the searchcoil's detection field.

DISCRIMINATION

When the detector emits different tones for different types of metals, and

when the detector "eliminates" certain metals, we refer to this as the

detector "discriminating" among different types of metals.

Discrimination is an important feature of professional metal detectors.

Discrimination allows the user to ignore trash and otherwise undesirable

objects.

PINPOINTING

Pinpointing is the process of finding the exact location of a buried object.

Long-buried metals can appear exactly like the surrounding soil, and can

therefore be very hard to isolate from the soil.

GROUND CANCELATION

Ground Cancelation is the ability of the detector to ignore, or "see through,"

the earth's naturally occurring minerals, and only sound a tone when a

metal object is detected. This detector incorporates proprietary circuitry to

eliminate false signals from many mineralized soils.

CONTENTS OF BOX

The following detector components are in the box:

1. S-ROD with Control Housing, Arm Rest and Locking Collar

2. Lower Stem

3. Searchcoil

4. Bolt & Knurled Knob

5. This Owner's Manual

●

ASSEMBLING THE DETECTOR

Hand-grip

Searchcoil

Cable

Plug

S-Rod

Locking

Collar

Battery

Compartment

(back side)

Headphone

Jack

Armrest

Searchcoil

Slack

in cable

●

1Hold S-ROD upright.

●

2Loosen LOCKING COLLAR on S-ROD;

rotate counterclockwise.

●

3Insert LOWER STEM into S-ROD with the

SILVER BUTTON pointed upward.

●

4Rotate the LOWER STEM until the

SILVER BUTTON locates and clicks into

a hole.

●

5Attach the SEARCHCOIL to the LOWER

STEM using the BOLT and KNURLED

KNOB.

●

6Adjust the LOWER STEM to a length that

lets you maintain a comfortable upright

posture while holding the detector relaxed

at your side with the SEARCHCOIL

parallel to the ground in front of you.

●

7Wind the CABLE around the STEM.

Leave slack in the cable at the bottom to

allow the searchcoil to pivot.

●

8Align the pins on the CABLE PLUG to the

connector holes on the rear of the control

housing.

●

9Push in CABLE PLUG.

●

10 Twist the LOCKING COLLAR fully in the

clockwise direction until stems are locked

securely together.

S-ROD

LOCKING

COLLAR

INTERNAL

CAM LOCK

SILVER BUTTON

LOWER

STEM

S-ROD LOWER STEM

The detector requires a single 9-volt ALKALINE battery (battery not included).

Do not use ordinary “Zinc Carbon” batteries

Do not use “Heavy Duty” batteries.

Rechargeable batteries can also be used. If you use rechargeables, we

recommend using a “Nickel Metal Hydride” rechargeable battery.

The battery compartment is located on the back side of the Control Housing.

Slide the battery door to the side to remove. Insert battery. Close battery door.

When it's time to replace the battery simply push down firmly on the bottom of

the battery (see illustration).

BATTERY LIFE

Expect 20 to 25 hours of life from a

9-volt alkaline battery.

Rechargeable batteries provide about 8

hours of usage per charge.

BATTERY INDICATOR

The battery icon has three segments

plus an outline segment.

The amount of battery voltage for an

ALKALINE battery is indicated as

follows:

3segments illuminated: 8.1 volts or more

2segments illuminated: 7.1 to 8.0 volts

1segment illuminated: 6.5 to 7.0 volts

No segments illuminated: 6.2 to 6.4 volts

Outline Flashing: 6.1 or less

SPEAKER VOLUME AND BATTERY CHARGE

You may notice the speaker volume drop while one battery segment is

illuminated.

With the outline flashing, low speaker volume will be very apparent.

BATTERIES

BATTERY

REMOVAL

Patent Pending

I. Supplies Needed:

a Nail (made of iron) a U.S. Quarter (or silver coin)

a U.S. Nickel a Gold Ring

a U.S. Dime a U.S. Penny, dated after 1982 (post-1982

pennies are made of Zinc)

(Most newer non-U.S. coinage also contains mostly Zinc)

II. Position the Detector:

a.Place the detector on a table with the searchcoil hanging over the edge. Or

better, have a friend hold the detector with the searchcoil off the ground.

b.Keep the searchcoil away from walls,

floors and metal objects.

c.Remove watches, rings and jewelry.

d.Turn off lights or appliances whose

electromagnetic emissions may cause

interference.

e.Pivot the searchcoil back.

f.Press to power on.

III. Demonstrate DISCRIMINATION Feature:

a.Pass all objects over the searchcoil and notice the different tones.

Nail: low tone

Nickel: medium tone

Zinc Penny: medium tone

Gold Ring: most gold rings will register with a medium tone

Dime: high tone

Quarter: high tone

b.Press until DISC is highlighted on the display.

QUICK-START DEMONSTRATION

c.Press once. The iron indicator on the display will disappear.

d.Wave the nail. It will not be detected because it has been

“discriminated out.”

IV. Demonstrate NOTCH Feature:

a.Press until NOTCH is highlighted.

b.Press four times. The “Zn” icon will flash and then disappear.

c.Wave a Zinc Penny over the searchcoil. It will not be detected because it

has been “notched out.” Notice on the display the target categories not

illuminated are not detected.

V. Demonstrate PINPOINT Feature:

a.Press and hold . “PP” momentarily appears on the screen.

b.Hold a coin motionless over the searchcoil.

c.Lower coin toward searchcoil and then raise coin away from searchcoil.

d.Notice that the sound changes as the coin moves closer and farther.

e.Notice that the depth indicator changes as the coin moves up and down.

This metal detector is intended for locating buried metal objects. When

searching for metals, underground or on the surface, you have the following

challenges and objectives:

1. Ignoring signals caused by ground minerals.

2. Ignoring signals caused by metal objects that you do not want

to find, like nails.

3. Identifying a buried metal object before you dig it up.

4. Estimating the size and depth of objects, to facilitate digging them up.

5. Eliminating the effects of electromagnetic interference from other

electronic devices.

Your metal detector is designed with these things in mind.

1. Ground Minerals

All soils contain minerals. Signals from ground minerals can interfere with

the signals from metal objects you want to find. All soils differ, and can differ

greatly, in the type and amount of ground minerals present. This detector

has proprietary circuitry to automatically eliminate interfering signals from

minerals that occur naturally in the ground.

NOTE: This detector will not completely eliminate interference from all types

of minerals. For example, the detector IS NOT designed for use on wet

sand saltwater beaches. Another example of soil this detector will not

eliminate is any soil containing large concentrations of iron oxides, which are

usually red in color.

2. Trash

If searching for coins, you want to ignore items like aluminum foil and nails.

You can see the Target-ID value of the buried objects, listen to the sounds

and then decide what you want to dig up. Or you can eliminate unwanted

metals from detection by using the DISCRIMINATION feature.

3. Identifying Buried Objects

Metal objects are identified along the 9-segment Conductivity Arc. This scale is an

indicator of the relative electrical conductivity of different objects. Segments to the

right indicate more conductive targets. Iron objects, which are usually of lesser

value, illuminate on the left-most segments. Silver objects illuminate on the right-

most segments.

4. Size and Depth of Buried Objects

The 3-segment graphic indicates the relative depth of a buried metal object.

This graphic can indicate the relative size of different objects or their distance from

the searchcoil. For a given object, the more distance between it and the searchcoil,

the more arrows illuminated.

THE BASICS OF METAL DETECTING

5. EMI (Electromagnetic Interference)

The searchcoil produces a magnetic field and then detects changes in that

magnetic field caused by the presence of metal objects. This magnetic

field that the detector creates is also susceptible to the electromagnetic

energy produced by other electronic devices. Cell phones, cell phone

towers, power lines, microwave ovens, lighting fixtures, TVs, computers,

motors, etc… all produce EMI which can interfere with the detector and

cause it to beep when no metal is present, and sometimes to beep

erratically.

The SENSITIVITY control lets you reduce the strength of this magnetic

field, and therefore lessen its susceptibility to EMI. You may want to

operate at maximum strength, but the presence of EMI may make this

impossible, so if you experience erratic behavior or “false” signals, reduce

the sensitivity.

THE BASICS OF METAL DETECTING

POWER

ON/OFF Press

or + to

CHANGE THE

SETTING of

the active

menu item

Press-and-Hold

PINPOINT for

precision target

pinpointing

at any time

Press MENU to

make it active.

The current

selection is

indicated

with a “•”

HOW TO WORK THE CONTROLS

THE DISPLAY

POWER

ON/OFF

Target

Category

Icons

Target-ID

Target

Depth

Indicator

Battery Level

Indicator

Target Conductivity Arc

(Metal objects are classified by electrical conductivity,

the highest to the right)

DEPTH INDICATOR

Coin-sized objects will be detected up to 9” deep.

The 3-segment graphic indicator is calibrated to coin-sized objects.

Coin on Surface Coin is Shallow Coin is Very Deep

Objects other than coins will still register on the 3-segment depth scale, but the

depth indication will be relative. For example, all 3 segments illuminated could

indicate a coin buried 9” deep, but could also be a very large object several feet

deep. Use the Depth Indicator in conjunction with the Conductivity Arc to gain

more information.

OVERLOAD WARNING

If a metal object or highly magnetic soil are too close to the searchcoil, the

detector will overload and “ --” will appear on the screen. The detector will

make a rapid, repeating mid-tone warning sound. Overload will not harm the

detector, but the detector will not function under these conditions. If overload

occurs, raise the searchcoil to detect the target from a greater distance, or

move to a different location.

The Menu is located on the left side of the screen. During normal operation the

Menu is inactive and faded. Press the MENU button to cycle through the

Menu. Each press of the Menu button moves to the next Menu item.

Use and to select a Menu option. The option selected is marked by “•”.

Once a menu option is selected, the setting can be changed using

and . Here is a description of the Menu options:

SENS

Adjust the sensitivity from 1 to 10. The higher the number, the more sensitive

the detector. This sensitivity control does not affect Pinpoint sensitivity.

If the detector beeps erratically or beeps when there are no metal objects being

detected, reduce the sensitivity.

The searchcoil produces a magnetic field and then detects changes in that

magnetic field caused by the presence of metal objects. This magnetic field

that the detector creates is also susceptible to electromagnetic energy (EMI)

produced by other electronic devices. Cell phones, cell phone towers, etc…

all produce EMI which can interfere with the detector and cause it to beep

when no metal is present, and sometimes to beep erratically.

VOLUME

Adjust speaker volume from 0 to 10. The Volume control changes the

loudness of the audio when targets are detected, and also the loudness of

the keypad presses and warning sounds.

DISC

DISCRIMINATION

When the detector emits different tones for different types of metals, and

when the detector "eliminates" certain metals, we refer to this as the detector

"discriminating" among different types of metals.

Discrimination is an important feature of professional metal detectors.

Discrimination allows the user to ignore trash and otherwise undesirable

objects.

The DISC controls the detector's Discrimination function. In its default setting

all metals are detected. Use this

DISC

control in order to eliminate

unwanted types of metals from detection. Targets are eliminated from

detection from left to right across the Target Category Arc.

Each time you press the key a target category icon will disappear.

When an icon disappears that category is eliminated from detection. Notice

that the 4 right-most categories cannot be eliminated. These 4 right-most

categories represent silver or other high-value targets, which are generally

desirable; therefore the detector does not allow them to be discriminated out.

To return categories to detection, press the key and categories will be

accepted back for detection from right to left.

NOTCH

The

NOTCH

control is similar to Discrimination in that it allows you to accept

or reject different types of metals. While DISC works left to right, the NOTCH

control allows you to accept or reject individual categories.

Categories eligible for NOTCH are

FOIL

5¢

,ALUM,Zn.

Press or to program the NOTCH feature. Each press of

or cycles to a new category and that category icon will flash for

3 seconds. Then the category will reverse status. Alternatively, press

while the icon is flashing to accept the Notch. If the icon had previously

been illuminated it will now disappear indicating that the category has

been eliminated from detection. Likewise, an icon that is not visible on the

display will re-illuminate, indicating that that category is now notched in

(i.e. detected).

Use or to select

NOTCH

. Each time you press or

the category to be notched flashes on the screen. Any of the 4 eligible

categories can be “Notched” in or out. After the category icon flashes

and times out, the Notch status will change.

Press-and-hold to activate the Pinpoint feature.

Searchcoil motion is not required; a motionless searchcoil over a metal target

will induce sound.

Audio is V.C.O. The 2-digit number displayed indicates target depth, in inches.

The scale in calibrated to coin-sized objects.

How to Pinpoint

After you have identified a target, press-and-hold to identify the target's

exact location. This technique can yield more information about the target's

shape and size and also find its exact location to facilitate extraction.

Pinpoint as follows:

1. Press and hold

2. Position the searchcoil just barely off the ground, and to the side of the

target.

3. Now move the searchcoil slowly across the target, and you can locate it

by the sound.

The target is located directly under where the sound is loudest.

Narrow It Down:

1. To narrow the response further, position the center of the searchcoil near

the center of the response pattern, but not directly over the center.

2. Release .

PINPOINT

3. Immediately press-and-hold again.

4. Repeat this narrowing procedure to narrow the field of detection further.

Note: Depth indication is less accurate after narrowing.

COIL DRIFT

If you plan to use PINPOINT for continuous searching, realize that drift will

occur over time, causing the detector to gain or lose sensitivity. Periodic

retuning of the detector is required to minimize drift; release and press

periodically to retune.

Pinpointing using motion modes (without ):

1. Sweep over target in narrowing side-to-side patterns.

2. Take note of the spot on the ground where “beep” occurs.

3. Step 90° to the side of the target.

4. Sweep searchcoil over.

5. This pinpoints the target location with an “X”.

The faceplate label is color-coded above the Conductivity Arc. Ferrous, gold and

silver targets will generally register within their corresponding color-coded

ranges. Targets that are not gold or silver register within the same range

according to their electrical conductivity.

Note that the electrical conductivity of a target depends on both its composition

and size. Silver is more conductive than gold so it registers farther to the right;

the larger the silver object, the farther it registers to the right.

Target-ID

When objects are detected, the detector will emit a sound and a 2-digit Target-ID

will appear on the screen. Possible Target-IDs range from 1 to 99. This number

represents the electrical conductivity of the target; higher numbers indicate more

highly conductive targets.

The 2-digit number indicates the Target-ID of the last object detected. This detector

has fast target response and is able to detect different objects in very close

proximity. Therefore, the Target-ID displayed may change rapidly as you sweep the

searchcoil.

Three seconds after the last Target-ID is displayed, the Target-ID will time-out and

the number will disappear.

At the same time the 2-digit Target-ID appears an indicator will illuminate along the

Target Category Arc indicating which target category the detected metal object falls

into. The segment at the top will time out in 3 seconds along with the Target-ID.

3-Tone Target Identification

The detector will provide 1 of 3 sounds for any metal object detected: a low,

medium or high tone. This audio feedback system is useful in conjunction with

the visual Target-ID system described above.

TARGET IDENTIFICATION

DEPTH AND TARGET DISPLAY

Please refer to the display on your

detector and reference the TARGET-ID

categories below applicable to your

model (not all detectors include all of

these categories).

READING THE DISPLAY

The display shows the PROBABLE

identification of the metal detected, as well

its PROBABLE depth.

The detector will register a target

identification, upon each sweep of the

searchcoil, when a buried target has been

located and identified. If, upon repeated

passes over the same spot, the target

identification reads inconsistently, the

target is probably a trash item. With

practice, you will learn to unearth only the

repeatable signals.

The segment identifications are highly

accurate, when detecting the objects

described on the faceplate. However, if an

object registers in a given category for an

unknown buried object, you could be

detecting a metallic object other than the

object described on the faceplate, but with

the same metallic signature. Also, the

greater the distance between the target

and the searchcoil, the less accurate the

target identification.

GOLD TARGETS Gold objects will

generally register toward the middle or

left-of-center on the scale.

Gold flakes will register under iron.

Small gold items will register under foil

or 5¢.

Large gold items will register toward the

center of the scale.

SILVER TARGETS: Silver objects will

dime or higher.

IRON: All sizes of iron objects will

This could indicate a worthless item such

as a nail, or a more valuable historic iron

relic.

FOIL:

Aluminum foil, such as a gum

wrapper, will register as foil. A small

broken piece of pull tab may also register

here.

5¢

:Most newer pull-tabs from beverage

cans, the type intended to stay attached

to the can, will register here. Many gold

rings will also register here.

ALUM: Older pull-tabs, which always

detached completely from the can, register

here. Many medium-sized gold rings also

PT (pull-tabs): Pull-tabs from older

beverage cans will register here. Few

newer pull-tabs will also register here.

Many gold rings will also register here.

S-CAP: Older screw caps from glass

bottles will register here. Large gold rings,

like a class ring, could also register here.

Some non-U.S. coins of recent vintage

will also register here.

Zinc: Medium conductivity objects and

many non-U.S. coins of recent vintage are

classified here.

The Target Identification Categories to the

right of the display, such as 10¢, DIME,

25¢, Quarter, 50¢ and $1 accurately

identify these U.S. coins. When used in

areas outside the U.S., these categories

identify coins or metal objects of high

relative conductivity (such as silver coins

or relics), or large objects made of any

type of metal.

Caution: The target indications are

visual references. Many other types of

metal can fall under any one of these

categories. While the detector will

eliminate or indicate the presence of most

common trash items, it is impossible to

accurately classify ALL buried objects.

HEADPHONE JACK

This detector has a 1/4” headphone

jack. It works with any stereo

headphone that has a 1/4” plug.

When the headphone jack is

connected, speaker volume is

disabled.

USING HEADPHONES

Using a detector with headphones

facilitates detection of the weakest

signals and also extends battery life.

It also allows you to hear subtle

changes in the sound more clearly,

particularly if searching in a noisy

location. For safety reasons, do not

use headphones near traffic or where other dangers are present. This device

is to be used with interconnecting cables/headphone cables shorter than three

meters.

Sweep Method

Sweep the detector side-to-side over

the ground.

Keep the searchcoil parallel to the

ground as you sweep; do not lift the

searchcoil at the ends of your sweeps.

Searchcoil motion is required for target

detection (except when using Pinpoint).

CORRECT

WRONG

USING THE DETECTOR

1. This detector comes with a waterproof searchcoil. The searchcoil can be

completely submerged into water. The control housing is not waterproof

and cannot be submerged in water. To use the detector in inclement

weather, consider purchasing the optional detector cover.

2. BURIED UTILITY LINES. This hobby metal detector is not designed to

locate buried pipes or cables. First Texas Products manufactures a

complete line of pipe and cable locators for this application. These are

sophisticated instruments with functionality different from your hobby metal

detector.

3. SEVERE SOIL CONDITIONS. While this detector has proprietary circuitry

to cancel out minerals naturally occurring in most soil types, it cannot

penetrate the most severe soils and it is not intended for use on wet

sand saltwater beaches. However, it is well-suited for detecting on dry

sand. Saltwater is highly conductive and requires a more sophisticated

type of detector. First Texas Products offers such types of detectors. Other

highly mineralized soils, such as those found in some gold prospecting

sites, may also limit this detector's capability. If the detector tends to

overload it could indicate you are in an area containing such severe soils.

4. TARGET-ID. The detector's Target-ID system calculates and displays the

most probably identification. Target-ID is affected by soil conditions, the

searchcoil's distance from the target, the length of time the target has been

buried and the target's proximity to other dissimilar targets. Very large

metal objects can overload the detector and may be classified

inaccurately.

5. REDUCE SENSITIVITY. The primary purpose of the Sensitivity control is

to allow the operator to reduce the sensitivity of the detector. All

detectorists desire to find objects at maximum depth. However, in today's

environment there is a never ending variety of devices emitting EMI

(Electromagnetic Interference) that can interfere with this detector.

There will be environments where the detector cannot operate at

maximum sensitivity. This is not a defect. If you find yourself in such an

environment, reduce the sensitivity of the detector. Some environments

may have so much EMI it is impossible to detect there. Both overhead

power lines and buried power lines can interfere with this detector. Power

line capacity may be quite different during certain times of the day. For

instance, peak hours of electrical use that can occur around 6 p.m. can

lead to a lot of EMI. If you experience power line interference, try returning

to a given area at a different time of day.

CHARACTERISTICS & LIMITATIONS

TROUBLESHOOTING GUIDE

SYMPTOM CAUSE SOLUTION

Detector chatters, • Using detector • Use detector

beeps erratically indoors outdoors only

or has low • Using detector near • Move away

sensitivity power lines

from power lines

• Using 2 detectors in • Keep 2 detectors

close proximity at least 6 meters

(20’) apart

• Environmental • Reduce sensitivity

electromagnetic until erratic

interference signals cease

Low speaker •

Discharged battery

• Replace battery

volume

• Wrong type of • Use only

battery alkaline batteries

Display does not lock

• Multiple targets •

Sweep coil at

on to one Target-ID present different angles

or detector emits • Highly mineralized • Move to a

multiple tones soil different area

• Sensitivity set

too high • Reduce sensitivity

No power, no sounds

• Dead battery • Replace batteries

• Cable not connected •

Check connections

securely

Do not mix old and new batteries. Use only alkaline batteries.

Do not mix alkaline, standard (zinc-carbon), or

rechargeable (NiCad, NiMH, etc.) batteries.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Consult the dealer or an experienced radio/TV technician for help.

CE The manufacturer declares that the minimum ESD performance criteria is 1) the unit shall not

be permanently damaged and 2) operator intervention is allowed.

This product is RoHS compliant.

This product meets the requirements of Industry Canada: CAN ICES-3 B/NMB-3 B.

5-YEAR LIMITED WARRANTY

FREE DETECTOR.

For details, visit www.detecting.com

This metal detector is warranted against defects in materials and workmanship

under normal use for five years from the date of purchase to the original owner.

Damage due to neglect, accidental damage or misuse of this product is not

covered under this warranty. Decisions regarding abuse or misuse of the detector

are made solely at the discretion of the manufacturer.

Proof of Purchase is required to make a claim under this warranty.

Liability under this Warranty is limited to replacing or repairing, at our option, the

metal detector returned, shipping cost prepaid, to First Texas Products. Shipping

cost to First Texas Products is the responsibility of the consumer.

To return your detector for service, please first contact First Texas Products for a

Return Authorization (RA) Number. Reference the RA number on your package

and return the detector within 15 days of calling to:

First Texas Products L.L.C.

1465 Henry Brennan Dr.

El Paso, TX 79936

Phone: 915-633-8354

NOTICE TO CUSTOMERS OUTSIDE THE U.S.A.

This warranty may vary in other countries; check with your distributor for details.

Warranty does not cover shipping costs to and from the U.S.A.

According to FCC part 15.21, changes or modifications made to this device not expressly approved by the party

responsible for compliance could void the user’s authority to operate this equipment.

This device complies with FCC Part 15 Subpart B Section 15.109 Class B.

except for the inclusion of brief quotations in a review.

Published by First Texas Products, L.L.C.

www.detecting.com

1465 Henry Brennan Dr. • El Paso, TX 79936 • (915) 633-8354

TREASURE HUNTER’S CODE OF ETHICS:

• Always check Federal, State, County and local laws before searching.

• Respect private property and do not enter private property without the owner’s permission.

• Take care to refill all holes and leave no damage.

• Remove and dispose of any and all trash and litter found.

• Appreciate and protect our inheritance of natural resources, wildlife and private property.

•

Act as an ambassador for all treasure hunters; use thoughtfulness, consideration and courtesy at all times.

• Never destroy historical or archaeological treasures.

• All treasure hunters may be judged by the example you set; always conduct yourself with

courtesy and consideration of others.

MPROQD 070114

ACCESSORIES

Gold

Prospecting Kits

FOR COMPLETE DETAILS VISIT WWW.DETECTING.COM • 1-800-413-4131

Bounty Hunter

Carry Bag

Rugged double-stitched construction. – CBAG2

Bounty Hunter

Pouch & Digger Combo

Pouch with 2 large pockets & 9” heavy duty digging tool. – TP-KIT-W

Pinpointer

Pinpoints the exact location of buried metal objects. Audio signal indicator

and vibrator. Runs on (1) 9-Volt Alkaline battery. – PIN POINTER-W

Bounty Hunter

Sand Scoop

Large scoop with filtering holes. Made of strong plastic. – SAND SCOOPBH

Replacement/Accessory Searchcoils

8” Concentric Open Face Accessory

Coil – 8COIL-7B13

1 0 ” Concentric Replacement Coil – 10COIL-BH

1 1 ” Biaxial Standard Coil – 11COIL-BH

Coil Covers

Protect your coil from abrasion and damage.

8” Concentric Open Face Accessory Coil Cover – 8COVER-7

1 0 ” Concentric Coil Cover – F70COVER

1 1 ” Biaxial Standard Coil Cover – COVER-11DD

9” Heavy-Duty Digging Tool

Metal blade with comfortable plastic handle and depth gauge. – TROWEL-2

Digging Tool

Light and practical plastic, wide blade digging tool. – TROWEL-W

Rain Cover

Custom made to protect from weather.

–

RAINCOV-ET

Bounty Hunter

Baseball Cap

One size fits all, with Bounty Hunter

logo. – BHCAP

Bounty Hunter

T-Shirt

100% cotton with Bounty Hunter

Logo.

Sizes: S, M, LG, XL & XXL – BHTSHIRT

Bounty Hunter Quick Draw Pro Owner's manual

Brand: Bounty Hunter

Model: Quick Draw Pro

Type: Owner's manual

Download PDF

report

Bounty Hunter Quick Draw Pro Owner's manual

Bounty Hunter Quick Draw Pro Owner's manual

Related papers

Other documents