2. Fourstar Group
  3. 11221364A

Fourstar Group 11221364A User manual

  • Hello! I've reviewed the assembly instructions for the fourstargroup Barstool 11221364A. This document contains step-by-step instructions and a parts list to help you assemble your new barstool, including instructions on how to connect the legs, attach the back and seat, and secure the cushion to the frame. I'm ready to answer any questions you might have about the assembly process or any other details from the document.
  • What should I do before starting assembly?
    What bolts should i not tighten at step 2?
    What should I do if I have missing parts?
MODEL: 11221364A
SWIVEL BARSTOOL
PARTS LIST AND HARDWARE
2
A
B
C
D
E
SHORT BOLT (1/2 in.)
LONG BOLT (1-1/8 in.)
8PCS
4PCS
WOOD SCREW 4PCS
1PC
ALLEN WRENCH
F
G
H
I
J
K
SWIVEL TRAY
CUSHION
LEG (ABOVE)
CIRCLE CONNECTOR
CONNECT LEG
1PC
1PC
1PC
1PC
1PC
4PCS
BACK
SEAT
L
LEG (BELOW)
1PC
1PC
M
N
2PCS
2PCS
WASHER
SPRING WASHER
MIDDLE BOLT (1 in.)
2PCS
J1
3
ASSEMBLY INSTRUCTIONS
STEP 1
Cross center bars of both legs (E) and (F).
STEP 2
* ATTN: DO NOT TIGHTEN BOLTS THIS TIME*
Attach connect leg (D) to each leg using circle connector (C) and long bolt
(J) as shown.
BEFORE YOU BEGIN , PLEASE FOLLOW ASSEMBLY
INSTRUCTION CAREFULLY , FOLLOW STEP BY STEP.
E
F
D
C
E
F
J
STEP 3
Attach back (A) to seat (B) as shown.
STEP 4
Turn it upside down and tighten middle bolt (J1) with spring washer (K)
and washer (L) as shown.
4
A
B
J1
K
L
STEP 5
Attach swivel tray (H) to frame (STEP 4) using short bolt (I) as shown.
STEP 6
Attach seat frame (STEP 4) onto leg frame (STEP 2) using short bolt (I)
as shown.
5
I
H
I
Do you have any questions? Missing small parts or hardware?
If you need assistance with the assembly of your
SWIVEL BARSTOOL
please e-mail our Customer Service Department at:
[email protected]
or call us at (508) 435-4830
or (800) 639-3803
Please include the following information in your email:
• Where item was purchased
• Item, model, style or SKU number listed on instructions
or box
• Part number, description of the part and quantity needed
This information will help us get the proper part to you faster
* ATTN: TIGHTEN ALL BOLTS*
STEP 7
Attach cushion (G) onto seat frame (STEP 6) using wood screw (M)
as shown.
6
G
M
/