Fortinet FortiGate-3016B User manual

Brand: Fortinet

Model: FortiGate-3016B

Type: User manual

This manual is also suitable for

3016B

www.fortinet.com

FortiGate-3016B

FortiOS 3.0 MR6

INSTALL GUIDE

FortiGate-3016B Install Guide

FortiOS 3.0 MR6

18 March 2008

01-30006-0458-20080318

publication including text, examples, diagrams or illustrations may be

reproduced, transmitted, or translated in any form or by any means,

electronic, mechanical, manual, optical or otherwise, for any purpose,

without prior written permission of Fortinet, Inc.

Trademarks

Fortinet, FortiGate and FortiGuard are registered trademarks and

Dynamic Threat Prevention System (DTPS), APSecure, FortiASIC,

FortiBIOS, FortiBridge, FortiClient, FortiGate, FortiGate Unified Threat

Management System, FortiGuard-Antispam, FortiGuard-Antivirus,

FortiGuard-Intrusion, FortiGuard-Web, FortiLog, FortiAnalyzer,

FortiManager, FortiOS, FortiPartner, FortiProtect, FortiReporter,

FortiResponse, FortiShield, and FortiVoIP, are trademarks of Fortinet, Inc.

in the United States and/or other countries. The names of actual

companies and products mentioned herein may be the trademarks of

their respective owners.

Regulatory compliance

FCC Class A Part 15 CSA/CUS

Caution: Risk of Explosion if Battery is replaced by an Incorrect Type.

Dispose of Used Batteries According to the Instructions.

Contents

FortiGate-3016B FortiOS 3.0 MR6 Install Guide

01-30006-0458-20080318 3

Contents

Contents.............................................................................................. 3

Introduction ........................................................................................ 7

About the FortiGate-3016B ............................................................................... 8

About this document......................................................................................... 8

Document conventions.................................................................................. 8

Typographic conventions .............................................................................. 9

Further Reading................................................................................................. 9

Fortinet Knowledge Center ......................................................................... 10

Comments on Fortinet technical documentation......................................... 10

Customer service and technical support ...................................................... 10

Installing ........................................................................................... 11

Environmental specifications......................................................................... 11

Cautions and warnings ................................................................................... 12

Grounding ................................................................................................... 12

Rack mount instructions.............................................................................. 12

Mounting ..................................................................................................... 12

Plugging in the FortiGate................................................................................ 14

Connecting to the network .......................................................................... 15

Turning off the FortiGate unit......................................................................... 15

Configuring....................................................................................... 17

NAT vs. Transparent mode............................................................................. 17

NAT mode ................................................................................................... 17

Transparent mode....................................................................................... 18

Connecting to the FortiGate unit.................................................................... 18

Connecting to the web-based manager ...................................................... 18

Connecting to the CLI ................................................................................. 19

Configuring NAT mode ................................................................................... 20

Using the web-based manager ................................................................... 20

Configure the interfaces........................................................................ 20

Configure a DNS server........................................................................ 21

Adding a default route and gateway ..................................................... 21

Adding firewall policies ......................................................................... 22

Using the CLI .............................................................................................. 23

Configure the interfaces........................................................................ 23

FortiGate-3016B FortiOS 3.0 MR6 Install Guide

4 01-30006-0458-20080318

Contents

Configure a DNS server ....................................................................... 24

Adding a default route and gateway..................................................... 24

Adding firewall policies ......................................................................... 25

Configuring Transparent mode...................................................................... 25

Using the web-based manager ................................................................... 26

Switching to Transparent mode............................................................ 26

Configure a DNS server ....................................................................... 26

Adding firewall policies ......................................................................... 26

Using the CLI .............................................................................................. 27

Switching to Transparent mode............................................................ 27

Configure a DNS server ....................................................................... 28

Adding firewall policies ......................................................................... 28

Verify the configuration .................................................................................. 29

Backing up the configuration......................................................................... 29

Restoring a configuration............................................................................... 30

Additional configuration ................................................................................. 30

Set the time and date.................................................................................. 30

Set the Administrator password .................................................................. 30

Configure FortiGuard .................................................................................. 31

Updating antivirus and IPS signatures ................................................. 31

Advanced configuration.................................................................. 33

Protection profiles........................................................................................... 33

Firewall policies............................................................................................... 34

Configuring firewall policies ........................................................................ 35

Antivirus options............................................................................................. 35

AntiSpam options............................................................................................ 36

Web filtering..................................................................................................... 37

Logging ............................................................................................................ 38

AMC modules................................................................................... 39

Installing AMC filler units ............................................................................... 39

Installing modules........................................................................................... 39

Removing modules ......................................................................................... 40

Using the AMC modules ................................................................................. 40

Hard disk module ........................................................................................ 40

Formatting the hard disk....................................................................... 41

Log configuration using the web-based manager................................. 41

Log configuration using the CLI............................................................ 42

Viewing logs ......................................................................................... 42

ASM-FB4 and ADM-XB2 modules.............................................................. 42

Changing interfaces to operate in SGMII or SerDes mode .................. 42

Contents

FortiGate-3016B FortiOS 3.0 MR6 Install Guide

01-30006-0458-20080318 5

Configure the speed ............................................................................. 44

FortiGate Firmware .......................................................................... 45

Downloading firmware .................................................................................... 45

Using the web-based manager....................................................................... 45

Upgrading the firmware............................................................................... 45

Reverting to a previous version................................................................... 46

Backup and Restore from a USB key ......................................................... 47

Using the USB Auto-Install.......................................................................... 47

Using the CLI.................................................................................................... 48

Reverting to a previous version................................................................... 49

Installing firmware from a system reboot using the CLI.............................. 50

Restoring the previous configuration........................................................... 52

Backup and Restore from a USB key ......................................................... 52

Using the USB Auto-Install.......................................................................... 52

Additional CLI Commands for a USB key ................................................... 53

Testing new firmware before installing ......................................................... 53

Index.................................................................................................. 57

FortiGate-3016B FortiOS 3.0 MR6 Install Guide

6 01-30006-0458-20080318

Contents

Introduction Register your FortiGate unit

FortiGate-3016B FortiOS 3.0 MR6 Install Guide

01-30006-0458-20080318 7

Introduction

Welcome and thank you for selecting Fortinet products for your real-time network

protection.

The FortiGate Unified Threat Management System improves network security,

reduces network misuse and abuse, and helps you use communications

resources more efficiently without compromising the performance of your

network. The FortiGate Unified Threat Management System are ICSA-certified for

firewall, IPSec, and antivirus services.

The FortiGate Unified Threat Management Systemis a dedicated, easily managed

security device that delivers a full suite of capabilities, which include:

• application-level services such as virus protection and content filtering

• network-level services such as firewall, intrusion detection, VPN and traffic

shaping

The FortiGate Unified Threat Management System uses Fortinet’s Dynamic

Threat Prevention System (DTPS™) technology, which leverages breakthroughs

in chip design, networking, security and content analysis. The unique ASIC-based

architecture analyzes content and behavior in real-time, enabling key applications

to be deployed right at the network edge where they are most effective at

protecting your networks.

Product Registration.

To register, enter your contact information and the serial numbers of the FortiGate

units that you or your organization have purchased. You can register multiple

FortiGate units in a single session without re-entering your contact information.

By registering your FortiGate unit, you will receive updates to threat detection and

prevention databases (Antivirus, Intrusion Detection, etc.) and will also ensure

your access to technical support.

For more information, see the Fortinet Knowledge Centre article “Registration

Frequently Asked Questions” (http://kc.forticare.com/default.asp?id=2071).

FortiGate-3016B FortiOS 3.0 MR6 Install Guide

8 01-30006-0458-20080318

About the FortiGate-3016B Introduction

About the FortiGate-3016B

The FortiGate-3016B multi-threat security appliance is a carrier-class device with

sixteen gigabit Ethernet interfaces and a full complement of network protection

features. Each interface of the FortiGate-3016B provides wire-speed firewall

performance using Fortinet's advanced FortiASIC network processor technology.

Multiple FortiGate-3016Bs can be deployed in redundant clusters to ensure

failsafe operation. All FortiGate-3016B fiber ports use hardware acceleration, for

enhanced network performance.

The FortiGate-3016B is the ideal solution for large enterprises and Managed

Security Service Providers (MSSPs) looking to add new security services.

The highly available architecture and redundant hot-swappable power supplies

ensure failsafe operation, and AMC expansion provide additional connectivity,

performance and storage capacity.

Figure 1: FortiGate-3016B

About this document

This document explains how to install and configure your FortiGate unit onto your

network. This document also includes how to install and upgrade new firmware

versions on your FortiGate unit.

This document contains the following chapters:

• Installing – Describes setting up and powering on a FortiGate unit.

• Configuring – Provides an overview of the operating modes of the FortiGate

unit and how to integrate the FortiGate unit into your network.

• Advanced configuration – Describes additional configuration you can perform

on the FortiGate unit to enhance network protection, including antivirus,

antispam, firewall configuration and logging.

• AMC modules – Describes the installation and configuration options for the

single-width AMC modules available for the FortiGate unit.

• FortiGate Firmware – Describes how to install, update, restore and test

firmware for the FortiGate device.

Document conventions

The following document conventions are used in this guide:

• In the examples, private IP addresses are used for both private and public IP

addresses.

• Notes and Cautions are used to provide important information:

POWER

STATUS

Esc Enter

MGMT1

MGMT2

MODEM

CONSOLE

3 5 7 9 11 13 15

6 8 10 12 14 16

ASM

Introduction Further Reading

FortiGate-3016B FortiOS 3.0 MR6 Install Guide

01-30006-0458-20080318 9

Typographic conventions

FortiGate documentation uses the following typographical conventions:

Further Reading

The most up-to-date publications and previous releases of Fortinet product

documentation are available from the Fortinet Technical Documentation web site

at http://docs.forticare.com.

The following FortiGate product documentation is available:

• FortiGate QuickStart Guide

Provides basic information about connecting and installing a FortiGate unit.

• FortiGate Administration Guide

Provides basic information about how to configure a FortiGate unit, including

how to define FortiGate protection profiles and firewall policies; how to apply

intrusion prevention, antivirus protection, web content filtering, and spam

filtering; and how to configure a VPN.

• FortiGate online help

Provides a context-sensitive and searchable version of the Administration

Guide in HTML format. You can access online help from the web-based

manager as you work.

• FortiGate CLI Reference

Describes how to use the FortiGate CLI and contains a reference to all

FortiGate CLI commands.

Note: Highlights useful additional information.

Caution: Warns you about commands or procedures that could have unexpected or

undesirable results including loss of data or damage to equipment.

Convention Example

Keyboard input In the Gateway Name field, type a name for the remote VPN

peer or client (for example, Central_Office_1).

Code examples config sys global

set ips-open enable

end

CLI command syntax config firewall policy

edit id_integer

set http_retry_count <retry_integer>

set natip <address_ipv4mask>

end

Document names FortiGate Administration Guide

Menu commands Go to VPN > IPSEC > Phase 1 and select Create New.

Program output Welcome!

Variables

<address_ipv4>

FortiGate-3016B FortiOS 3.0 MR6 Install Guide

10 01-30006-0458-20080318

Customer service and technical support Introduction

• FortiGate Log Message Reference

Available exclusively from the Fortinet Knowledge Center, the FortiGate Log

Message Reference describes the structure of FortiGate log messages and

provides information about the log messages that are generated by FortiGate

units.

• FortiGate High Availability User Guide

Contains in-depth information about the high availability feature and the

clustering protocol.

• FortiGate IPS User Guide

Describes how to configure the FortiGate Intrusion Prevention System settings

and how the FortiGate IPS deals with some common attacks.

• FortiGate IPSec VPN User Guide

Provides step-by-step instructions for configuring IPSec VPNs using the

web-based manager.

• FortiGate SSL VPN User Guide

Compares FortiGate IPSec VPN and FortiGate SSL VPN technology, and

describes how to configure web-only mode and tunnel-mode SSL VPN access

for remote users through the web-based manager.

• FortiGate PPTP VPN User Guide

Explains how to configure a PPTP VPN using the web-based manager.

• FortiGate Certificate Management User Guide

Contains procedures for managing digital certificates including generating

certificate requests, installing signed certificates, importing CA root certificates

and certificate revocation lists, and backing up and restoring installed

certificates and private keys.

• FortiGate VLANs and VDOMs User Guide

• Describes how to configure VLANs and VDOMS in both NAT/Route and

Transparent mode. Includes detailed examples.

Fortinet Knowledge Center

The Knowledge Center contains troubleshooting and how-to articles, FAQs,

technical notes, and more. Visit the Fortinet Knowledge Center at

http://kc.forticare.com.

Comments on Fortinet technical documentation

Please send information about any errors or omissions in this document, or any

Fortinet technical documentation, to [email protected].

Customer service and technical support

Fortinet Technical Support provides services designed to make sure that your

Fortinet systems install quickly, configure easily, and operate reliably in your

network.

Please visit the Fortinet Technical Support web site at http://support.fortinet.com

to learn about the technical support services that Fortinet provides.

Installing Environmental specifications

FortiGate-3016B FortiOS 3.0 MR6 Install Guide

01-30006-0458-20080318 11

Installing

This chapter describes installing your FortiGate unit in your server room,

environmental specifications and how to mount the FortiGate in a rack if

applicable.

This chapter contains the following topics:

• Environmental specifications

• Cautions and warnings

• Plugging in the FortiGate

• Turning off the FortiGate unit

Environmental specifications

• Operating temperature: 32 to 104°F (0 to 40°C)

If you install the FortiGate unit in a closed or multi-unit rack assembly, the

operating ambient temperature of the rack environment may be greater than

room ambient temperature. Therefore, make sure to install the equipment in

an environment compatible with the manufacturer's maximum rated ambient

temperature.

• Storage temperature: -13 to 158°F (-25 to 70°C)

• Humidity: 5 to 90% non-condensing

• Air flow - For rack installation, make sure that the amount of air flow required

for safe operation of the equipment is not compromised.

• For free-standing installation, make sure that the appliance has at least 1.5 in.

(3.75 cm) of clearance on each side to allow for adequate air flow and cooling.

This device complies with part FCC Class A, Part 15, UL/CUL, C Tick, CE

and VCCI. Operation is subject to the following two conditions:

• This device may not cause harmful interference, and

• This device must accept any interference received, including interference that

may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

FortiGate-3016B FortiOS 3.0 MR6 Install Guide

12 01-30006-0458-20080318

Cautions and warnings Installing

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The equipment compliance with FCC radiation exposure limit set forth for

uncontrolled Environment.

Cautions and warnings

Review the following cautions before installing your FortiGate unit.

Grounding

• Ensure the FortiGate unit is connected and properly grounded to a lightning

and surge protector. WAN or LAN connections that enter the premises from

outside the building should be connected to an Ethernet CAT5 (10/100 Mb/s)

surge protector.

• Shielded Twisted Pair (STP) Ethernet cables should be used whenever

possible rather than Unshielded Twisted Pair (UTP).

• Do not connect or disconnect cables during lightning activity to avoid damage

to the FortiGate unit or personal injury.

Rack mount instructions

Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly,

the operating ambient temperature of the rack environment may be greater than

room ambient. Therefore, consideration should be given to installing the

equipment in an environment compatible with the maximum ambient temperature

(Tma) specified by the manufacturer.

Reduced Air Flow - Installation of the equipment in a rack should be such that

the amount of air flow required for safe operation of the equipment is not

compromised.

Mechanical Loading - Mounting of the equipment in the rack should be such that

a hazardous condition is not achieved due to uneven mechanical loading.

Circuit Overloading - Consideration should be given to the connection of the

equipment to the supply circuit and the effect that overloading of the circuits might

have on overcurrent protection and supply wiring. Appropriate consideration of

equipment nameplate ratings should be used when addressing this concern.

Reliable Earthing - Reliable earthing of rack-mounted equipment should be

maintained.

Particular attention should be given to supply connections other than direct

connections to the branch circuit (e.g. use of power strips).

Mounting

If required to fit into a rack unit, remove the rubber feet from the bottom of the

FortiGate unit.

The FortiGate unit can be placed on any flat surface, or mounted in a standard 19-

inch rack unit.

Installing Cautions and warnings

FortiGate-3016B FortiOS 3.0 MR6 Install Guide

01-30006-0458-20080318 13

When placing the FortiGate unit on any flat, stable surface, ensure the unit has at

least 1.5 inches (3.75 cm) of clearance on each side to ensure adequate airflow

for cooling.

For rack mounting, use the mounting brackets and screws included with the

FortiGate unit.

To install the FortiGate unit into a rack

1 Attach the mounting brackets to the side to the unit so that the brackets are on the

front portion of the FortiGate unit. Ensure that the screws are tight and not loose.

The following photos illustrate how the brackets should be mounted. Note that the

screw configuration may vary depending on your FortiGate unit.

Figure 1: Installed mounting brackets

2 Position the FortiGate unit in the rack to allow for sufficient air flow.

3 Line up the mounting bracket holes to the holes on the rack, ensuring the

FortiGate unit is level.

4 Finger tighten the screws to attach the FortiGate unit to the rack.

5 Once you verify the spacing of the FortiGate unit and that it is level, tighten the

screws with a screwdriver. Ensure that the screws are tight and not loose.

Note: Fortinet recommends purchasing side rail mounts or similar rack mount aids

separately to ensure the FortiGate unit is attached safely to the rack.

Caution: Depending on the size of your FortiGate unit, avoid personal injury, you may

require two or more people to install the unit in the rack.

FortiGate-3016B FortiOS 3.0 MR6 Install Guide

14 01-30006-0458-20080318

Plugging in the FortiGate Installing

The following photos illustrate how the mounting brackets and FortiGate unit

should be attached to the rack.

Figure 2: Mounting in a rack

Plugging in the FortiGate

The FortiGate unit does not have an on/off switch.

To power on the FortiGate unit

1 Connect the power cables to the power connections on the back of the FortiGate

unit.

2 Connect the power cables to power outlets.

Each power cable should be connected to a different power source. If one power

source fails, the other may still be operative.

After a few seconds, SYSTEM STARTING appears on the LCD. The main menu

setting appears on the LCD when the system is running.

The FortiGate unit starts and the Power and Status LEDs light up. The Status

LEDs flash while the FortiGate unit starts up, and remain lit when the system is

running.

Note: If only one power supply is connected, an audible alarm sounds to indicate a failed

power supply. Press the red alarm cancel button on the rear panel next to the power supply

to stop the alarm.

Installing Turning off the FortiGate unit

FortiGate-3016B FortiOS 3.0 MR6 Install Guide

01-30006-0458-20080318 15

Connecting to the network

Using the supplied Ethernet cable, connect one end of the cable to your router or

modem, whatever the connection is to the Internet. Connect the other end to the

FortiGate unit. Connect to either the External, WAN port, or port 1. Connect

additional cable to the Internal port or port 2 and your internal hub or switch.

Turning off the FortiGate unit

Always shut down the FortiGate operating system properly before turning off the

power switch to avoid potential hardware problems.

To power off the FortiGate unit

1 From the web-based manager, go to System > Status.

2 In the Unit Operation display, select Shutdown, or from the CLI enter:

execute shutdown

3 Disconnect the power cables from the power supply.

FortiGate-3016B FortiOS 3.0 MR6 Install Guide

16 01-30006-0458-20080318

Turning off the FortiGate unit Installing

Configuring NAT vs. Transparent mode

FortiGate-3016B FortiOS 3.0 MR6 Install Guide

01-30006-0458-20080318 17

Configuring

This section provides an overview of the operating modes of the FortiGate unit,

NAT/Route and Transparent, and how to configure the FortiGate unit for each

mode. There are two ways you can configure the FortiGate unit, using the

web-based manager or the command line interface (CLI). This section will step

through using both methods. Use whichever you are most comfortable with.

This section includes the following topics:

• NAT vs. Transparent mode

• Connecting to the FortiGate unit

• Verify the configuration

• Backing up the configuration

• Additional configuration

NAT vs. Transparent mode

The FortiGate unit can run in two different modes, depending on your network

infrastructure and requirements. You have a choice between NAT/Route mode

and Transparent mode. Both include the same robust network security features

such as antispam, antivirus, VPN and firewall policies.

NAT mode

In NAT/Route mode, the FortiGate unit is visible to the network. Like a router, all

its interfaces are on different subnets.

In NAT mode, each port is on a different subnet, enabling you to have a single IP

address available to the public Internet. The FortiGate unit performs network

address translation before it sends and receives the packet to the destination

network.

In Route mode, there is no address translation.

Figure 1: FortiGate unit in NAT mode

You typically use NAT/Route mode when the FortiGate unit is operating as a

gateway between private and public networks. In this configuration, you would

create NAT mode firewall policies to control traffic flowing between the internal,

private network and the external, public network, usually the Internet.

Internet

Router

Internal network

192.168.1.20

192.168.1.99204.23.1.5

NAT mode policies controlling

traffic between internal

and external networks.

FortiGate-3016B FortiOS 3.0 MR6 Install Guide

18 01-30006-0458-20080318

Connecting to the FortiGate unit Configuring

Transparent mode

In Transparent mode, the FortiGate unit is invisible to the network. Similar to a

network bridge, all FortiGate interfaces must be on the same subnet. You only

have to configure a management IP address to make configuration changes. The

management IP address is also used for antivirus and attack definition updates.

Figure 2: FortiGate unit in Transparent mode

You typically use the FortiGate unit in Transparent mode on a private network

behind an existing firewall or behind a router. The FortiGate unit performs firewall

functions, IPSec VPN, virus scanning, IPS web filtering, and Spam filtering.

Connecting to the FortiGate unit

To configure, maintain and administer the FortiGate unit, you need to connect to it.

There are two methods for these tasks:

• using the web-based manger, a GUI interface using a current web browser

such as FireFox or Internet Explorer.

• using the command line interface (CLI), a command line interface similar to

DOS or UNIX commands using an SSH terminal or Telnet terminal.

Connecting to the web-based manager

To connect to the web-based manager, you require:

• a computer with an Ethernet connection

• Microsoft Internet Explorer version 6.0 or higher or any recent version of the

Fortinet FortiGate-3016B User manual

Brand: Fortinet

Model: FortiGate-3016B

Type: User manual

This manual is also suitable for

3016B

Download PDF

report

Fortinet FortiGate-3016B User manual

This manual is also suitable for

Fortinet FortiGate-3016B User manual

Related papers

Other documents