Dune HD Smart D1 Owner's manual

Smart D1

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby Laboratories.

English ● Français ● Deutsch ● Nederlands ● Español ● Italiano ● Русский ● Українська ● Polski

Quick Start Guide

Guide de démarrage rapide

Schnellstartanleitung

Snel Start Gids

Guía de instalación rápida

Guida Rapida

Краткое руководство

Короткий посібник

Skrócona instrukcja Szybki Start

Page is loading ...

3

Table of Contents

4

12

20

28

36

44

52

60

68

English

Quick Start Guide

Français

Guide de démarrage rapide

Deutsch

Schnellstartanleitung

Nederlands

Snel Start Gids

Español

Guía de instalación rápida

Italiano

Guida Rapida

Русский

Краткое руководство

Українська

Короткий посібник

Polski

Skrócona instrukcja Szybki Start

4

Dune HD Smart D1 Quick Start Guide

Introduction

Dune HD Smart D1 is an all-in-one solution for up to Full HD (1080p) video playback.

Key Features

● The newest Sigma Designs 8642/8643 media processor: enjoy excellent playback and performance

of interactive features.

● HDD player: connect an HDD to the player and play content directly from the HDD.

● Network player: connect the player to a local network and play content directly from PC or NAS (UPnP,

SMB, NFS).

● MKV player: play HD and SD video in a popular MKV format and other modern video file formats,

including top quality HD video with very high bitrate.

● RealD: watch 3D video in this ultra modern format used in cinema for the latest movies.

● HD audio: enjoy top-quality audio tracks (Dolby TrueHD, DTS HD Master Audio, LPCM, FLAC).

● 3 USB ports: conveniently connect HDDs, USB flash drives, USB card readers and other USB storage

devices.

● eSATA port: connect an HDD via the most efficient eSATA interface.

● Internal HDD option: use an optional 3.5” SATA HDD installed directly inside the player

● USB slave port: easily and quickly transfer files between the HDD in the player (when installed) and a

PC.

● SD card slot: easily play media files on SD memory cards from your camera or other devices, or use an

SD memory card as a local or system storage (required for BD Live function).

● HDMI 1.3: ensure the best possible quality of HD video and HD audio.

● A rich set of standard A/V connectors: use S/PDIF optical audio, stereo audio, component video,

composite video outputs to easily connect any A/V equipment.

● Flexible support for Dolby TrueHD and DTS HD Master Audio: output as bitstream or decode to

LPCM for flexibility when connecting audio equipment.

● Video output flexibility: output video in any resolution and format (from SD to 1080p, 24p/PAL/NTSC).

● Upscaling: high quality upscaling of DVD and any other SD video content to Full HD (1080p) or other

HD resolution.

● File browser: convenient file browser with powerful file management (copy, move, delete, rename,

organize, sort).

● The best basis for multi-component Dune HD Smart system: built-in VFD display helps to build the

most feature-rich solution.

5

Extra Functions

● High-quality music playback: play very high-quality (up to 192 Khz / 24-bit) music files in various

formats (FLAC, Monkey’s Audio APE, WAV/PCM, DTS, etc).

● Playlists: build playlists from your folders, use your own playlists, use repeat and shuffle functions.

● NAS function: access files on storage devices (HDD, optical drive, etc) attached to the player from the

local network (using SMB or FTP).

● BitTorrent: use built-in BitTorrent client to download files from P2P networks.

● Customizable user interface: work with media collections using cover art and icon browsing (with Full

HD graphics).

● Flash applications: extend the player functionality with FlashLite applications.

● Internet radio: playback and record various Internet radio stations (HTTP/MP3).

● IPTV: playback and record IPTV streams (multicast UDP/RTP) from your Internet provider*.

● Digital TV option: playback and record Digital TV channels using an optional Digital TV USB dongle**.

● Internet browsing: view Internet Web sites on your TV using the built-in Web browser***.

* Check availability of multicast UDP/RTP streams with your Internet provider.

** Digital TV USB dongle is not included; this option can be purchased separately.

*** Built-in Web browser has limitations and may not allow to view some Internet Web sites.

English

6

Dune HD Smart D1 Quick Start Guide

A/V

Package Contents

1. Dune HD Smart D1 media player

2. Remote control (batteries may not

be included)

1

NOTE: Additional items (optional) may be included into the package, depending on player configuration,

region, and distributor.

Exterior

3. HDMI cable

4. AV cable

5. Power supply cord

6. External power supply

7. Quick start guide

Front view

1. On/off button

2. LED indicator

3. IR eye

4. SD card slot

5. Display

6. USB 2.0 host

7. Eject button (*)

* For controlling an external optical

drive (when connected)

1

23 4 5 6 7

4

2

3

5

76

Rear view

1. LAN and 2xUSB 2.0 host

2. Composite video and analog stereo audio

output

3. Component (Y/Pb/Pr) video output

4. HDMI 1.3

5. eSATA host

6. Optical digital audio output

7. USB Slave

8. Dedicated bus connector (I

2

C) (for future

connecting external devices)*

9. DC power 12V

10. Power switch

* Not for headphones or other A/V devices;

connecting headphones or other A/V devices may

damage your equipment

12 3 4 56 8 1079

7

English

1. Command indicator — ﬂ ashes in response to RC button pressing.

2. EJECT — open/close the optical drive tray. MUTE — turn the sound

on/off. MODE — switch the video output mode; control some other

player functions. POWER — toggle the standby mode.

3. A (Red), B (Green), C (Yellow), D (Blue) — access Blu-ray disc

features; control some other player functions.

4. 0–9 — enter numbers and text; control some other player functions.

5. SEARCH — jump to a speciﬁ ed playback position. ZOOM — change

the zoom factor for the video content being played. SETUP — en-

ter/leave the setup menu; adjust playback settings during playback.

6. V+/V- (volume up / volume down) — adjust the volume.

7. P+/P- (page up / page down) — scroll up and down in various lists;

control some other player functions.

8. Arrows (LEFT, RIGHT, DOWN, UP), ENTER, RETURN, TOP

MENU, POP UP MENU, INFO — main buttons for controlling the

player (navigate across the items on the screen, open/use the cur-

rently selected item, go back to the previous screen, go to main

menu, show popup menu with actions, show information, control

some other player functions).

9. PLAY, PAUSE, STOP, SLOW, REW, FWD, PREV, NEXT — control

the playback.

10. SUBTITLE, ANGLE/ROTATE, AUDIO, REC, DUNE, URL — con-

trol the playback and some other player functions.

NOTES:

● Use alkaline AAA batteries.

● Observe polarity when inserting batteries.

● Direct the remote control to the player. There must be no obstacles

between the RC and the player.

● If RC functions only at short distances or stops functioning, make

sure to replace the batteries.

● Some RC buttons may have several functions depending on the

current player mode.

● Some RC buttons may be available only in certain player modes or

only during playback of a certain content.

Remote Control

1

2

3

4

5

6

7

8

10

9

8

Dune HD Smart D1 Quick Start Guide

Getting Started

Remove the transparent protecting film from the front panel of the player to ensure good look of the player.

Ensure there is enough space around the player for proper cooling. The space at each side should be not

less than 10 cm.

Ensure the RC has batteries installed.

Connect the player to your TV and to other A/V equipment in an appropriate way. Use HDMI connection

to get the best possible quality of video and audio. Make sure to switch off the player and all relevant A/V

equipment before connecting them. Ensure your TV and other A/V equipment are configured to use proper

inputs.

Switch on the player. The player will perform its initial loading procedure, which may take up to about 1

minute. During the loading procedure, "DUNE" logo is shown on the TV.

● If you do not see "DUNE" logo on the TV when you switch on the player, it may mean some problem with

the connection between the player and the TV or that a wrong video input is chosen in the TV or A/V

receiver/switch. In such a case, recheck the cables and the settings of the TV or A/V receiver/switch, or

try to use different cables or a different way of connecting the player to the TV.

● If you see "DUNE" logo on the TV when you switch on the player, but then the picture disappears and

no other picture appears during at least 10 seconds, it may mean that a wrong video output mode is

configured in the player. In such a case, press the "MODE" RC button, and then press one of the RC

buttons "1", "2", "3", "4" or "5" to switch to a different video output mode (see "Quick Setting of Video

Output Mode").

Finally, you should see the main screen of the player menu. The main screen shows items allowing to

use different player functions and access all storage devices and network drives connected to the player.

Adjust the player settings as needed using "SETUP" item on the main screen of the player menu (or by

pressing the "SETUP" RC button). In particular, you may want to adjust video settings, audio settings, and

network settings.

To choose the language of the player menu, use “Setup / General / Interface language” setting.

Use the RC buttons "LEFT", "RIGHT", "UP", "DOWN", "ENTER", "RETURN" to navigate through the

player menu. Use the "MENU" RC button to show the list of available commands. Use the ''POP UP

MENU'' RC button to show the information about the selected item.

Quick Setting of Video Output Mode

The “MODE” RC button allows quick setting of video output mode without entering the player setup menu.

This way of video output conﬁ guration may be required if you see no picture on the screen after connect-

ing your player to a TV.

Press the “MODE” RC button and then one of the RC buttons “1”, “2”, “3”, “4”, or “5” to switch to one

of the following video output modes respectively:

1. Composite/Component, PAL

2. Composite/Component, NTSC

3. HDMI, 480i, 60 Hz

4. HDMI, 720p, 60 Hz

5. HDMI, 1080i, 60 Hz

After you see a picture on the TV, press the “ENTER” RC button, and then go to the player setup menu to

perform a more precise conﬁ guration of the video output mode if needed.

NOTE: The procedure of quick setting of video output mode can not be used during playback. To ensure this

procedure can be used, switch the player off, then switch the player on, and the wait about 1 minute to ensure

the player loading is ﬁ nished.

9

English

Connecting USB Drives

To connect a USB drive, ensure you are on the main screen of the player menu and connect the USB drive

to an USB port of the player. The player will recognize the USB drive, and will show an item corresponding

to the USB drive on the main screen.

When connecting a USB drive requiring signiﬁ cant power (such as USB HDD), use an external power

supply for the USB drive. Power provided by the USB ports of the player may not be enough for correct

functioning of the USB drive.

Do not disconnect or switch off the USB drive when some write operation is in progress.

Using SD Memory Cards

To insert an SD memory card, ensure you are on the main screen of the player menu and insert the

memory card into the SD card slot of the player. The player will recognize the memory card, and will show

an item corresponding to the memory card on the main screen. Some SD memory cards may not be

recognized by the player or may work incorrectly; in such a case, use other models of SD memory cards.

Do not eject the SD memory card when some write operation is in progress.

Connecting eSATA Drives

To connect an eSATA drive, switch off both the player and the eSATA drive, connect the eSATA drive to the

eSATA port of the player (and connect the eSATA drive to its power supply), switch on the eSATA drive,

and, as the last step, switch on the player. The player will recognize the eSATA drive, and will show an item

corresponding to the eSATA drive on the main screen of the player menu.

Switch off and disconnect the eSATA drive only after switching off the player.

Using USB Slave Function

To connect the player with an installed internal HDD via USB slave, switch off the player, connect the

USB slave port of the player to the USB host port of the PC, and then switch on the player. The PC will

recognize a new USB device. After ﬁ nishing working with the player in the PC, ensure the USB device is

correctly stopped in the PC («Safely remove hardware» or a similar function), switch off the player, and

then disconnect the USB slave port of the player from the USB host port of the PC.

Accessing Network Drives

To connect a network drive using SMB or NFS protocol, ensure you are on the main screen of the player menu,

press the "MENU" RC button, and choose "Create Network Folder", then ﬁ ll the parameters of the network drive

as needed. The player will show an item corresponding to the conﬁ gured network drive on the main screen.

To browse the list of network resources accessible via SMB or UPnP protocols, use "Network Browser"

item on the main screen of the player menu. NOTE: If some network resources are not shown by the

player, you may need to wait some minutes and then retry (or press the "MENU" RC button and choose

"Refresh" command).

Formatting HDD

To format a HDD attached to the player, select the drive item on the main screen of the player menu, press

the "INFO" RC button and choose "Format Disk" (to format the entire disk) or "Format Partition" (or to for-

mat an already existing disk partition only). The player will format the disk using "EXT2" ﬁ lesystem. NOTE:

To use disks formatted by the player on a Windows PC, you may need to install additional software on the

PC, such as "EXT2FSD" (http://www.ext2fsd.com/).

10

Dune HD Smart D1 Quick Start Guide

Switching the Player On and Off

To switch on the player, ensure the power switch on the rear panel is in “on” state, and press the “POWER”

RC button or the “on/off” button on the front panel.

To put the player into the standby mode, press the “POWER” RC button or the “on/off” button on the front

panel. To exit the standby mode, press any of these buttons again.

Depending on the player settings (see the player setup menu), the “hardware standby” or “software stand-

by” mode may be used. In the “hardware standby” mode, almost complete power-off takes place and

the player consumes almost no power. In the “software standby” mode, the player produces no signal

on the video output, but is still functioning. For example, if you have some storage devices connected to

the player, you may still access them from network (“NAS” function of the player). Exiting the “software

standby” mode takes just a few seconds. When the player is in the “software standby” mode, it still con-

sumes signiﬁ cant power. It is not recommended to keep the player in the “software standby” mode for a

while if you do not need it.

To switch off the player completely, toggle the power switch on the rear panel. Do not do it if some drive is

connected to the player and some write operation is in progress.

NOTE: After switching off the player or putting the player into the “hardware standby” mode, it is recom-

mended to wait about 1 minute before switching it on again.

NAS (Network Attached Storage)

You can access storage devices connected to the player from the local network using FTP and SMB pro-

tocols. On a Windows PC, just type "ftp://ip_address" or "\\ip_address" in the Windows explorer, where

"ip_address" is the IP address of the player.

WiFi

You can use a USB WiFi adapter to connect the player to the local network via WiFi.

Please see here for the information on supported USB WiFi adapters:

http://dune-hd.com/support/hw_compat/

Internal 3.5" SATA HDD

A possibility to install the internal 3.5” SATA HDD may depend on your reseller. Please contact your local

reseller for more information.

Limitations

Compatibility of the player with a particular hardware (A/V equipment, network equipment, disk drives, etc)

may depend on various factors (particular hardware model, speciﬁ cs of hardware installation and usage,

conﬁ guration of the player and the hardware, etc). If the player does not correctly work with a particular

hardware, try to adjust the conﬁ guration of the player or hardware, try to use the hardware in a different

way, or try to use some other hardware.

Compatibility of the player with a particular media content (ﬁ les, discs, etc) may depend on various factors

(speciﬁ cs of media content encoding, speciﬁ cs of the conﬁ guration of the player, etc). If the player does not

play correctly a particular media content, try to adjust the conﬁ guration of the player, or try to use media

content encoded in a different way.

11

English

Updating Your Player and Getting More Information

Please check here for updated versions of player ﬁ rmware (which may improve player functioning and

extend player possibilities):

http://dune-hd.com/ﬁ rmware/

(Note: You can also connect the player to Internet and use the online ﬁ rmware upgrade function, see

Setup / Misc / Firmware Upgrade.)

Please check here for more detailed and up-to-date documentation and information on player usage:

http://dune-hd.com/manuals/

http://dune-hd.com/support/

Modular System of Player Configuration

Dune HD Smart players allow to create custom conﬁ gurations based on the primary (head) unit like

Dune HD Smart B1/H1/D1 and several optional extension modules of choice, which can be combined

to form an integrated player.

The Dune HD Smart player itself is a head unit which can be extended at user’s desire with extension

modules, such as the following:

● Dune HD Smart HE (adds the option for easy installation of SATA 3.5” HDD with hot swap feature).

● Dune HD Smart ME (adds the option for installing different additional modules).

● Dune HD Smart BE (adds the option for Blu-ray/DVD/CD playback) (including commercial Blu-ray/

DVD discs).

Extension modules can work exclusively with the head unit (Dune HD Smart player) and use a com-

mon control system, implemented via the head unit. The number of connected modules may vary in

a wide range: the user can compile his/her own Dune HD Smart system of e.g. two, three and even

six components.

In order to group SMART devices by 2 or 3 horizontally, special mounts can be used. For example,

a group of 3 modules, including the head unit, combined this way, will comprise a new player of a

standard size like the model Dune HD Max.

Besides, grouping the required number of modules allows to supersede the functionality of Dune HD

Max, providing more ﬂ exibility at the same time. In particular, the modular approach provides the pos-

sibility to group modules in any order at any time depending on user’s demands, as well as replacing

(upgrading) particular modules instead of replacing the entire set of equipment.

Additional information is available on the Internet site http://www.dune-hd.com

Page is loading ...

www.Dune-HD.com

Dune HD Smart D1, Smart H1 Owner's manual

Related papers

Other documents