Genius Mini Operating instructions

Page is loading ...

4

ENGLISH

SINGLE-CHANNEL RADIO CONTROL MINI

SAFETY REGULATIONS

Before using the radio control read the entire in-

struction handbook carefully.

Use the radio control only at a distance that ena-

bles visual control throughout the automated

system movement.

In case of not working equipment contact only and

EXCLUSIVELY qualified GENIUS staff or GENIUS

service centers.

GENIUS is not responsible for problems arising from

improper use of the radio control.

The radio control may be used only together with

an EASYWAVE receiver.

DO NOT ALTER IN ANY WAY THE CONTROL DEVICE.

1. PACKAGE CONTENTS

The package contains:

1 Single-channel transmitter with built-in battery.

1 Wall bracket.

1 Pack of fixing accessories.

1 Instruction book

2. TECHNICAL SPECIFICATIONS

Description Value

Power supply 1 3-V battery (CR 2032)

Absorbed current 10 mA

Frequency 868.30 MHz

Modulation FSK

Operating Ambient Tempe-

rature

-20°C +60°C

Range

~ 100 m (outside)

~ 30 m (inside)

Dimensions

72x40x17 mm

(without wall bracket)

Weight

~ 25 g

(with battery and without

wall bracket)

3. OPERATING PRINCIPLE

The mini radio control is a single-channel radio device for

controlling the movement of internal or external blinds

or roller shutters.

With reference to figure 1, the table which follows descri-

bes the radio control lay-out:

Ref. Description

a

Up button

b

Down button

c

Stop buttons

d

Signal led

e

Wall bracket

With only one radio control one or multiple operators can

be controlled.

•

4. START-UP

Fix the wall bracket (Fig. 1 ref. e) using the accessories

provided.

The wall bracket must be installed out of the reach

of children.

The radio control is supplied with an internal battery

already installed and may be used immediately.

Transfer the radio control code to the receiver coupled

with the motor to be controlled. To perform this proce-

dure correctly, in the case of an external receiver, refer

to the receiver instructions. For operators with an inte-

grated receiver the procedure of transferring the radio

control code is described in the operator instructions.

5. USE OF THE RADIO CONTROL

The four buttons on the radio control allow opening, but-

ton a, closing, button b, or stopping the motor, buttons

c.

To open or close the blinds/roller shutters press the appro-

priate button lightly, there is no need to hold the button

down. Every time one of the buttons is pressed the led on

the radio control comes on (Fig. 1 ref. d).

The following table shows the button function during in-

dividual phases.

Automated

system status

Controls

Opening Stop Closing

Closed Opens No effect No effect

At opening No effect

Stops

operation

It reverses

movement

at closure

Open No effect No effect Closes

At closure

It reverses

movement

at opening

Stops

operation

No effect

Stopped Opens No effect Closes

6. BATTERY REPLACEMENT

To replace the radio control battery, follow the steps

below:

Insert a coin in the slot present at the top of the radio

control and turn it until the two shells open.

Remove the old battery in the direction of the ar-

row.

Insert the new battery, matching the poles as indica-

ted in Figure 2, and close the radio control.

Insert the battery matching the poles as indicated

in Fig. 2, if the battery is inserted the wrong way

round, the radio control will not work.

Use only and exclusively batteries with the cha-

racteristics shown in the Table in paragraph 2.

Dead batteries should be handed back to the seller

or thrown into appropriate refuse containers.

Please dispose of dead batteries carefully.

7. CONFORMITY

This product conforms to directive 99/05/EC.

•

1.

2.

3.

Page is loading ...

Le descrizioni e le illustrazioni del presente manuale non sono impegnative. GENIUS si riserva il diritto, lasciando inal-

terate le caratteristiche essenziali dell’apparecchiatura, di apportare in qualunque momento e senza impegnarsi

ad aggiornare la presente pubblicazione, le modifiche che essa ritiene convenienti per miglioramenti tecnici o per

qualsiasi altra esigenza di carattere costruttivo o commerciale.

The descriptions and illustrations contained in the present manual are not binding. GENIUS reserves the right, whils

leaving the main features of the equipments unaltered, to undertake any modifications to holds necessary for either

technical or commercial reasons, at any time and without revising the present publication.

Les descriptions et les illustrations du présent manuel sont fournies à titre indicatif. GENIUS se réserve le droit d’apporter

à tout moment les modifications qu’elle jugera utiles sur ce produit tout en conservant les caractéristiques essentielles,

sans devoir pour autant mettre à jour cette publication .

Las descripciones y las ilustraciones de este manual no comportan compromiso alguno. GENIUS se reserva el de-

recho, dejando inmutadas las características esenciales de los aparatos, de aportar, en cualquier momento y sin

comprometerse a poner al día la presente publicación, todas las modificaciones que considere oportunas para el

perfeccionamiento técnico o para cualquier otro tipo de exigencia de carácter constructivo o comercial.

Die Beschreibungen und Abbildungen in vorliegendem Handbuch sind unverbindlich. GENIUS behält sich das Recht

vor, ohne die wesentlichen Eigenschaften dieses Gerätes zu verändern und ohne Verbindlichkeiten in Bezung auf

die Neufassung der vorliegenden Anleitungen, technisch bzw, konstruktiv / kommerziell bedingte Verbesserungen

vorzunehmen.

De beschrijvingen in deze handleiding zijn niet bindend. GENIUS behoudt zich het recht voor op elk willekeurig moment

de veranderingen aan te brengen die het bedrijf nuttig acht met het oog op technische verbeteringen of alle mogelijke

andere productie- of commerciële eisen, waarbij de fundamentele eigenschappen van het apparaat gehandhaafd

blijven, zonder zich daardoor te verplichten deze publicatie bij te werken.

Timbro rivenditore: / Distributor’s stamp: / Timbre de l’agent: / Sello del revendedor: / Fachhändlerstempel: /

Stempel dealer:

Via Padre Elzi, 32

24050 - Grassobbio

BERGAMO-ITALY

tel. 0039.035.4242511

fax. 0039.035.4242600

[email protected]

www.geniusg.com

00058I0836 Rev.0

Genius Mini Operating instructions

Genius Mini Operating instructions

in other languages

Related papers

Other documents