Zebra 2824-Z User manual

Brand: Zebra

Model: 2824-Z

Category: Label printers

Type: User manual

This manual is also suitable for

H 2824-Z

Desktop Printer

User Manual

Zebra

LP 2824-Z™

User Guide

Customer Order # 980531-001 A

The copyrights in this manual and the label printer described therein are owned by

Zebra Technologies. Unauthorized reproduction of this manual or the software in

the label printer may result in imprisonment of up to one year and fines of up to

$10,000 (17 U.S.C.506). Copyright violators may be subject to civil liability.

All product names and numbers are Zebra trademarks, and Zebra, the Zebra logo,

ZPL, ZPL II, ZebraNet, ZebraLink, are registered trademarks of ZIH Corp. All

rights reserved.

All other brand names, product names, or trademarks belong to their respective

holders.

980531-001 A LP 2824-Z User Guide 3

Proprietary Statement

This manual contains proprietary information of Zebra Technologies Corporation and its

subsidiaries (“Zebra Technologies”). It is intended solely for the information and use of parties

operating and maintaining the equipment described herein. Such proprietary information may

not be used, reproduced, or disclosed to any other parties for any other purpose without the

expressed written permission of Zebra Technologies.

Product Improvements

Continuous improvement of products is a policy of Zebra Technologies. All specifications and

designs are subject to change without notice.

FCC Compliance Statement

This device complies with Part 15 rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may

cause undesired operation.

This equipment has been tested and found to comply with the limits for Class B Digital

Devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a residential

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the product manuals, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, the user is encouraged to do one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

4 LP 2824-Z User Guide 980531-001 A

Proprietary Statement

The user is cautioned that any changes or modifications not expressly approved by Zebra

Technologies could void the user’s authority to operate the equipment. To ensure compliance,

this printer must be used with Shielded Communication Cables.

Canadian DOC Compliance Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Liability Disclaimer

Zebra Technologies takes steps to ensure that its published Engineering specifications and

manuals are correct; however, errors do occur. Zebra Technologies reserves the right to correct

any such errors and disclaims liability resulting therefrom.

Limitation of Liability

In no event shall Zebra Technologies or anyone else involved in the creation, production, or

delivery of the accompanying product (including hardware and software) be liable for any

damages whatsoever (including, without limitation, consequential damages including loss of

business profits, business interruption, or loss of business information) arising out of the use

of, the results of use of, or inability to use such product, even if Zebra Technologies has been

advised of the possibility of such damages. Some jurisdictions do not allow the exclusion or

limitation of incidental or consequential damages, so the above limitation or exclusion may

not apply to you.

980531-001 A LP 2824-Z User Guide 5

Preface

This section provides you with contact information, document structure and organization, and

additional reference documents.

Contacts

You can contact Zebra Technologies at any of the following:

Visit us at: www.zebra.com

Our Mailing Addresses:

Zebra Technologies Corporation

333 Corporate Woods Parkway

Vernon Hills, Illinois 60061.3109 U.S.A

Telephone: +1 847.634.6700

Fax: +1 847.913.8766

Zebra Technologies Europe Limited

Zebra House

The Valley Centre, Gordon Road

High Wycombe

Buckinghamshire HP13 6EQ, UK

Telephone: +44 (0)1494 472872

Fax: +44 (0)1494 450103

6 LP 2824-Z User Guide 980531-001 A

Preface

Environmental Management

Support

You can contact Zebra support at:

Web Address: www.zebra.com/SS/service_support.htm

US Phone Number +1 847.913.2259

UK/International Phone Number +44 (0) 1494 768289

Environmental Management

Document Conventions

The following conventions are used throughout this document to convey certain information:

Alternate Color (online only) Cross-references contain links to other sections in this guide.

If you are viewing this guide online, click the blue text

to jump to its location.

Command Line Examples All command line examples appear in Courier New font.

For example, type the following to get to the Post-Install scripts in the

bin directory:

Ztools

Files and Directories All file names and directories appear in Courier New font. For

example, the

Zebra<version number>.tar file and the /root directory.

Cautions, Important, Note, and Example

Note • The web address is case-sensitive.

Do not dispose of this product in unsorted municipal waste. This product is recyclable, and

should be recycled according to your local standards.

For more information, please see our website at:

Web address: www.zebra.com/environment

Caution • Warns you of the potential for electrostatic discharge.

Caution • Warns you of a potential electric shock situation.

Preface

Related Documents

980531-001 A LP 2824-Z User Guide 9

Contents

Proprietary Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Environmental Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Document Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1 • Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

What’s in the Box? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Inspecting the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2 • Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Modes of Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Attaching Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Loading Roll Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Adjusting the Roll Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Placing the Roll in the Media Compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Adjusting the Guides. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Operator Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Printing a Test Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Hooking Up the Printer and Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Interface Cable Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Communicating with the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Adjusting the Print Width. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Adjusting the Print Quality. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

10 LP 2824-Z User Guide 980531-001 A

Contents

3 • Operations & Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Thermal Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Replacing Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Printing in Peel-Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Printing on Fan-Fold Media. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Using the Cutter Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

4 • Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Print Head Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Media Path Considerations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Platen Considerations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Replacing the Platen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Replacing the Print Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Thermal-Transfer LP Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

5 • Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Resolutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Print Quality Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Manual Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Troubleshooting Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Printing a Configuration Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Recalibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Resetting the Factory Default Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Communications Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Feed Button Modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

6 • Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Universal Serial Bus (USB) Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Parallel Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

ZebraNet® PrintServer II for Ethernet Networks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Serial (RS-232) Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

980531-001 A LP 2824-Z User Guide 11

Introduction

This section describes what you get in your shipping box and provides an overview of printer

parts. This section also has procedures that describe how to open and close the printer and

report any problems.

Hello!

Thank you for choosing a Zebra® desktop printer, a high-quality on-demand printer

manufactured by the industry leader in quality, service, and value—Zebra Technologies

Corporation. For over 25 years, Zebra Technologies Corporation has provided customers with

the highest caliber of products and support.

Your printer is a high-quality on-demand printer. The printer provides thermal-transfer

printing (which uses ribbon) and direct-thermal printing.

This manual provides all of the information you will need to operate your printer on a daily

basis. To create label formats, refer to your programming guide. This guide is available by

contacting your distributor or dealer.

Your printer, when connected to a host computer, functions as a complete system for printing

labels and tags.

Note • Many printer settings may also be controlled by your printer’s driver or label

preparation software. Refer to the driver or software documentation for more information.

12 LP 2824-Z User Guide 980531-001 A

Introduction

What’s in the Box?

Save the carton and all packing materials in case you need to ship or store the printer later.

After unpacking, make sure you have all parts. Follow the procedures for inspecting the

printer to familiarize yourself with printer parts so you can follow the instructions in this book.

Power Supply

and Cords

Documentation

and Warranty

Printer

Cleaning

Pen

Sample

Labels

Introduction

Inspecting the Printer

980531-001 A LP 2824-Z User Guide 13

Inspecting the Printer

Look at the outside of the printer and make sure that all parts are present.

Opening the printer

To access the media compartment, you must open the printer. Pull the release levers towards

you and lift the cover.

Interface

Connectors

(vary by option)

Feed

Button

Power

Switch

Power

Supply

Receptacle

Status

Light

Release

Latches

14 LP 2824-Z User Guide 980531-001 A

Introduction

Inspecting the Printer

After opening the printer, check the media compartment.

Tear Bar

Print Head

Open-Hanger

Lock

Head-Up

Sensor

Peel-Off Option

Sensor

Roller

Bar

Platen

Roller

Media

Hangers

Media

Guides

Introduction

Inspecting the Printer

980531-001 A LP 2824-Z User Guide 15

Closing the printer

1. Hold the top cover and press the “kick-stand” cover lock to release.

2. Lower the top cover. The ribbon carriage automatically folds up into place.

3. Press down until the cover snaps closed.

Reporting Damage

If you discover damage or missing parts:

• Immediately notify and file a damage report with the shipping company. Zebra

Technologies Corporation is not responsible for any damage incurred during shipment of

the printer and will not cover the repair of this damage under its warranty policy.

• Keep the carton and all packing material for inspection.

• Notify the authorized reseller.

16 LP 2824-Z User Guide 980531-001 A

Introduction

Inspecting the Printer

980531-001 A LP 2824-Z User Guide 17

Getting Started

This section describes how to set up your printer for the first time and use the most common

operating procedures for loading media in tear-off mode and loading ribbon.

Modes of Printing

You can operate this printer in different modes:

• Standard tear-off mode allows you to tear off each label (or a strip of labels) after it is

printed.

• In optional peel-off mode, the backing material is peeled away from the label as it is

printed. After this label is removed, the next one is printed.

• In optional liner-free mode, labels have no backing. This option is only available with a

special platen.

• In optional cutter mode, an attached unit cuts through the media.

The printer typically uses roll media, but you can use fan-fold or other continuous media as

well.

For procedures to use optional modes and features, refer to the Operation and Options section.

18 LP 2824-Z User Guide 980531-001 A

Getting Started

Attaching Power Supply

Check the power supply to make certain it is appropriate for your input voltage.

1. Make sure the power switch is in the off position (forward).

2. The DC power supply has a barrel connector on one end that must be inserted into the

power supply receptacle on the back of the printer.

3. Insert the separate AC power cord into the power supply.

4. Plug the other end of the cord into an appropriate AC electrical outlet.

Caution • Use the power supply that came with your printer. Never operate the printer

and power supply in an area where they can get wet. Serious personal injury could result!

AC Power

Cord

Power

Indicator

Power

Supply

Receptacle

Power

Supply

Power

Switch

Barrel

Connector

Plug Varies

by Country

Getting Started

Loading Roll Media

980531-001 A LP 2824-Z User Guide 19

Loading Roll Media

When you load media, you must place the roll on the media hangers and then adjust the media

guides.

You must use the correct media for the type of printing you require. When printing without a

ribbon, you must use direct thermal media. When using ribbon, you must use thermal transfer

media. The printer's ribbon sensor detects motion of the supply spindle.

Adjusting the Roll Holders

Check the core of the media roll and adjust the holders if necessary.

• For a narrow core, lift the adjusters up.

• For a wide core, press the adjusters down.

Page is loading ...

Zebra 2824-Z User manual

Brand: Zebra

Model: 2824-Z

Category: Label printers

Type: User manual

This manual is also suitable for

Download PDF

report

Zebra 2824-Z User manual

This manual is also suitable for

Zebra 2824-Z User manual

Related papers

Other documents