7
Display A2
a. Automatic programmes indicators.
b. “Time Delay” mode indicator.
c. Cooking mode indicator.
d. Timer.
e. “Keep Warm” mode indicators.
f. “EXPRESS” programme indicator.
g. Reheat mode indicator.
h. Audible signals disabled indicator.
i. Temperature value indicator.
I. PRIOR TO FIRST USE
Carefully remove the multicooker and its accessories from the packaging.
Dispose of all packaging materials.
located on the housing. The absence of the serial number will deprive you
the appliance is normal and does not indicate a malfunction. In such case,
After transportation or storage at low temperatures allow the appliance to
stay at room temperature for at least 2 hours before using.
II. MULTICOOKER OPERATION
Plug in the appliance. Press and hold “Hour/+” or “Min/–” buttons. Current time
“Min/–” button to adjust the minute value. The hour value increases irrespective
of the minute value. After the maximum value is reached the adjustment starts
digits. After setting is complete do not press the buttons on the panel for 5
To disable audible signals press and hold “Menu” button in any mode. The
press and hold “Menu” button again.
except for “EXPRESS”. Adjustment increments and range depend on the
selected programme.
After an automatic programme is selected and “Menu” button is pressed, use
the “Hour/+” button, to adjust the hour value and “Min/–” button to adjust the
minute value. The hour value changes irrespective of the minute value. After
the maximum value is reached the adjustment starts again. Press and hold
the corresponding button to scroll through the digits.
In some automatic programmes the cooking time countdown starts only
after the appliance reaches the set temperature. For example, if you pour
cold water and set “STEAM” for 5 minutes, the programme will start to
is generated in the bowl. In “PASTA” the time starts to countdown after
water comes to a boil and “Start” is pressed again.
ready (including the programme time). Maximum time of delay is 24 hours.
Default time of delay comprises the programme time and the time required
to enter the operational parameters (if provided by the factory settings of
the programme). A programme can be delayed by 1 minute increments.
To adjust the time of delay after selecting of an automatic programme press
“Time Delay” button. To increase the hour value press “Hour/+” button. To
adjust the minute value press “Min/—” button. The hour value changes ir-
respective of the minute value. After the maximum value is reached the
adjustment starts again. Press and hold the corresponding button to scroll
through the digits.
Current time value is displayed during “Time Delay”. To see the cooking end
time press and hold “Time Delay” button. The function is available for all
automatic programmes, except for “FRY”, “PASTA “ and “EXPRESS”. Avoid
using “Time Delay” function for perishable meals (eggs, fresh milk, meat,
cheese, etc.).
This function automatically activates at the end of cooking, and keeps the
-
press and hold “Cancel/Reheat” button.
-
vance during “Time Delay” or the main cooking programme. To activate this
function press “Start” during cooking. To enable “Keep Warm” function press
“Start” button again.
“Keep Warm” function is not applicable for “YOGURT”, “PASTA”, “EXPRESS” and
1.
2. Close the lid and plug in the appliance.
3.
12 hours. “Reheat” function can be disabled by pressing and holding “Cancel/
Reheat” button, until the indicators go out.
The “Keep Warm” and “Reheat” functions enable the appliance to maintain the
temperature of a dish for 12 hours, however it is not recommended to keep a
cooking process.
Does your soup boil over? Does your oatmeal “escape”? Are your vegetables
-
rupting a cooking programme as if you cook on the stove or in the oven.
You can use “MASTERCHIEF LITE” only during cooking. “MASTERCHIEF LITE”
is not applicable for “EXPRESS”, “Time Delay” and waiting to access operat-
ing parameters.
-
“MASTERCHIEF LITE” can be very useful especially when you cook meals on
complex recipes, requiring combination of different cooking programmes (e.g.
cooking cabbage rolls, beef stroganoff, soup and different types of pasta, jam, etc.).
To adjust cooking temperature:
1. Press “Menu” button during cooking. The temperature value indicator
2.
Set the desired temperature. To increase the value press “Hour/+”
button, to reduce the value press “Min/—” button. Press and hold the
3.
After the maximum (minimum) value is reached the adjustment starts
again. Do not press the buttons on the control panel for 5 seconds.
For overheat protection when setting the cooking temperature higher than
(except for “BAKE”). Cooking temperature adjustment is not applicable for
“YOGURT” programme.
To adjust cooking time:
1.
2. -
increments press “Min/—” button. The hour value changes irrespective
of the minute value. After the maximum value is reached the adjust-
ment starts again. Press and hold the corresponding button to scroll
through the digits.
3. Do not press the buttons on the control panel for 5 seconds. Settings
When setting cooking time value to 00:00, the programme operation will
be stopped.
1. Prepare (measure) the ingredients.
2.
programme and position it inside the appliance. Ensure that all in-
element.
3. Close the main lid until it clicks into place. Plug in the appliance.
4.
Use “Menu” button to resume from standby mode. Use “Hour/+” and
“Min/–” buttons to select a programme (the corresponding programme
programme selection.
”MULTICOOK” enables to set the desired cooking temperature. Use “Hour/+”
button to increase the default value, “Min/–” button to reduce the value.
5. Use “Hour/+” and “Min/–” buttons to adjust default cooking time.
6. Set time of delay if necessary.
