811-838391W040
Symptom Cause (and remedy)
• EnsuretheACpoweradapterisconnected.
• Theunitisnotturnedon.
• MakesurethatyouselectONmode.
• Thevolumecontrolislocatedonthesideoftheunit-pleasetryadjustingthis.
• The
systemisinPAUSEmode.Pressthe
PLAYbuttontoreturntonormalplaymode.
• The unit is in FAST-FORWARD or FAST-REVERSEmode. Pressthe PLAYbutton to
return to normal play mode.
• Make
suretheAUDIO/VIDEOoutputconnectionsarecorrect.
• TheDTSDVDdisccannotbedecodedtohavespeakeroutput.
• Theunitistoohot;shutotheunitfor30minutestocoolitdown.
• Theregionnumberofthediscdoesn'tmatchtheregionnumberofthisunit.
• Cleanthedisc.
• Thediscisscratched.
• Please
adjusttheLCD'sbrightnessandcontrastusingtheSETUP button on the panel.
• The
plugsandjacksaredirty.Wipethemwithaclothslightlymoistenedwithalcohol.
• Clean
thedisc.
• There
isnodiscinside.(“NoDisc”appearsonthescreen).
• Insertthedisccorrectlywiththeplaybacksidefacingdown.
• Clean
thedisc.
• Theunitanddiscregionnumberareincompatible.
• Condensationmayhaveformedinsidetheunitduetoasuddenchangeintemperature.
Wait about an hour for it to clear and try again.
No power.
No sound or only
a very low-level
sound is heard.
No picture.
The picture is not
clear.
Severe hum or
noise is heard.
The disc does
not play.
System Setup
1. Press the SETUP button in STOP mode.
2. Press the
/ button to select System Page.
3. Press the
/ buttontoselecttheoption(TV
Display or Default), then press the
button.
4. Press the
/ button to adjust the settings, then
press the
PLAYbuttontoconrm.
5. Repeat steps 3 and 4 to adjust other options. Press
the
button to return to the previous menu.
6. Press the SETUP button to exit the menu.
Default
Ittakes3-5secondstoresettheDVDsettingstothefactorydefault.
TV Display
Pan Scan
• Whenwide-screenvideo isplayed, thismode clips theright andleftsides
of the image so that it can be viewed on a conventional screen.
• Somewide-screenDVDs that donotpermit PAN SCAN modeplaybackare
automaticallyplayed inLETTERBOXmode (black bandsthat appear at the
top and bottom of the screen).
LetterBox
• When wide-screen video isplayed inthis mode ona conventional screen,
black bands appear at the top and bottom of the screen.
Wide Screen
• This
is the correctmode for playing wide-screenvideos ontheunit screen
or other external wide-screens.
Notes:
• The
displayable picture size ispreset ontheDVD.Therefore the playback
pictureofsomeDVDsmaynotconformtothepicturesizeselected.
• When
youplayDVDsrecordedinthe4:3 aspectratio,theplaybackpicture
will alwaysappear inthe4:3 aspectratioregardless of theT V display
setting.
• SelectWide ScreentoconformtheLCDscreenonthe unit. Alwaysbe sure
that yourTVdisplay conforms tothe actualTV in use if you connect the
unittoaTV.
Wide Screen
Letter
Box
Cut off when a wide-screen
video image is played.
Pan Scan
Tv Display
Default
Wide
No
Go To SystemPage
--SystemPage --
System
Language
Video
LanguageSetup
1. Press the SETUP button in STOP mode.
2. Press the
buttontoselectLanguageSetupPage.
3. Press the
/
button to select the option (OSD
Language, Audio,Subtitle orDisc Menu), then press
the
button.
4. Press the
/ button to select your preferred
language, then press the
PLAYbuttontoconrm.
5. Repeat steps 3 and 4 to adjust other options. Press
the
button to return to the previous menu.
6. Press the SETUP button to exit the menu.
Notes:
• Some
DVDsmay not play intheaudio language youselected. Aprior language maybe programmed on
the disc.
• Some
DVDsmaybe set todisplay subtitles ina languageotherthantheone you selected.A priorsubtitle
language may be programmed on the disc.
• Some DVDs allowyou to changesubtitle selections usingthe discmenu only.If thisis thecase,press the
MENU button and choose the appropriate subtitle language from the selection on the disc menu.
• SomeDVDsmaynotincludeyourpre-selectedlanguage.Inthiscase,theDVDplayerautomaticallydisplays
disc menus consistent with the disc's initial language setting.
VideoSetup
1. Press the SETUP button in STOP mode.
2. Press the
buttontoselectVideoSetupPage.
3. Pre ss th e
/ bu t to n to sel ec t t he op ti on
(Brightness or Contrast), then press the
button.
4. Press the
button to adjust the setting, then
press the
PLAYbuttontoconrm.
5. Repeat steps 3 and 4 to adjust other options. Press
the
button to return to the previous menu.
6. Press the SETUP button to exit the menu.
Go To Language Setup Page
--Language Setup Page --
System
Language
Video
OSDLanguage
Audio
Subtitle
Disc Menu
Eng
Eng
Off
Eng
Brightness
Contrast
Go To Video Setup Page
--Video Setup Page --
Language
00
00
System
Video
This owner’s manual explains the basic instructions for operating this unit. Some DVDs are produced in
a manner that allows specic or limited operation during playback. Therefore, this unit may not respond
to all operating commands. THIS IS NOT A DEFECT. Please refer to the instructions accompanying the
specic DVD in question for more information about the options available on that DVD.
“
” may appear on the screen during operation. A “ ” means the desired operation is not permitted
by the unit or disc.
Playing a Disc (Basic Playback)
TroubleshootingGuide
MaintenanceCustomizing the Function Settings
ViewingJPEGFiles
Cleaning the Disc
A defective or soiled disc inserted into the unit can cause sound to drop out during playback.
Handle the disc by holding its inner and outer edges.
• Do
NOTtouchthesurfaceoftheunlabeledsideofthedisc.
• DoNOTstickpaperortapeonthesurface.
• DoNOTexposethedisctodirectsunlightorexcessiveheat.
• Cleanthediscbeforeplayback.Wipethediscfromthecenteroutwardwithacleaning
cloth.
• NEVERusesolventssuchasbenzineoralcoholtocleanthedisc.
• DoNOTuseirregularshapeddiscs(example:heartshaped,octagonal,etc.).Theymaycausemalfunctions.
Cleaning the Unit
• BesuretoturntheunitoanddisconnecttheACpoweradapterbeforecleaningtheunit.
• Wipethe unitwitha dry soft cloth. If the surfaces are extremely dirty,wipe clean with a cloth that has
been dipped in a weak soap-and-water solution and wrung out thoroughly, then wipe with a dry cloth.
• Never use alcohol, benzine,thinner,cleaningfluid or other chemicals. Do NOT use compressed airto
remove dust.
Important Note
• Beforetransportingtheunit,removethediscfromthedisccompartment.
ThisunitcanplayJPEGlesrecordedonaCD-RorCD-ROMdisc(CD-RWisnotrecommended).
ViewingJPEGFiles
1. Slide the open knob rightwards to open the disc
door.
2.
HoldaJPEG le discby itsedges andgently pushit
onto the spindle with the label side facing up until
youheara“click”.
3. Closethediscdoor.TheJPEGlesonthediscwillbe
displayed automatically or a folder list appears.
4. Press the
STOP button to display a folder list. Press
the
or button tohighlight a JPEG le toplay.
Press the
PLAY button to start playback.
Notes:
• You
can pressthe
PAUSEbutton tofreezethe picture.Press the PLAYbuttonto resumepicture slide
show.
• You
canpressthe
STOP buttontoquitplayback.
• Youcanpressandholdthe
PREV or NEXT button to change the picture.
• YoucanpresstheCursorbuttons(
, , , ) to rotate direction of the picture by 90
o
.
• Somediscsmaynotpermitthisoperation.
00:00 00:00
001/035
\
DSCN0281
DSCN0282
DSCN0283
DSCN0284
DSCN0285
DSCN0286
PausingPlayback(STILLMode)
Press the PAUSEbutton.Toresumenormalplayback,pressthe PLAYbutton.
Eachtimeyoupressthe
PAUSEbutton,thepictureadvancesoneframeonaDVD.
Skip (Forward / Reverse)
Press the
NEXTbuttontoadvancechaptersonaDVD.
Press and hold the
NEXTbuttontoskiptothenexttracksonanAudioCD.
Press the
PREVbuttontogobacktothepreviouschaptersonaDVD.
Press and hold the
PREVbuttontoskiptotheprevioustracksonanAudioCD.
Stopping Playback
Press the STOP button at the location where you want to interrupt playback. To resume playback at the
position where the disc was stopped, press the
PLAY button.
If you press the
STOP button twice, the unit’s memory will be cleared and pressing the PLAY button will
resettheDVDtothebeginning.
Playing a Disc
1. Slide the CHARGE / STANDBY / ON switch on the left side of the unit to the ON position.
See Customizing the function settings before proceeding to step 2.
2.
Slide the open knob rightwards to open the disc door.
3. Hold the disc by its sides and carefully place it onto the spindle with the label
sidefacingup,pushinggentlyuntilyouheara“click”.
4. Gently push the disc doorclosed. It takes ashort while for your unit to load
thedisc. Afterloading, formostDVDs, theunit willautomaticallystart playing
or take you to the main menu.
5. If the unit does not automaticallystartplayingthe DVD, press the
PLAY
button.
AdjusttheLCDScreen
YoucanadjusttheBrightness,PanelDisplayorContrastoftheLCDscreeninPLAYBACKmode.
1. Press the SETUPbuttoninPLAYBACKmode.
2.
Press the
/ button to select Brightness, Panel Display or Contrast.
3. Then press the
/ button to change the setting.
4. Press the SETUP button to exit the menu.
Subtitle Selection
1. WhileaDVDisplaying,presstheSUBTITLE button to display the current language setting, as shown in the
example.
2. Press the SUBTITLE button repeatedly to select the desired subtitle language. You can turn subtitles off by
pressing the SUBTITLE
buttonrepeatedlyuntil“
”isdisplayed.
Notes:
• Some DVDsare set todisplay subtitles automatically,andyou cannot turn them off evenifyou set the
subtitle function to off.
• Duringsomescenes,thesubtitlesmaynotappearimmediatelyafteryouselectyourdesiredscene.
• Thenumberofsubtitlelanguagesrecordeddiersdependingonthedisc.Ifonlyonelanguageisrecorded,
the language does not change.
• Thisfunctioncanonlybeusedfordiscsonwhichsubtitleshavebeenrecordedinmultiplelanguages.
• SomeDVDsallowyoutochangesubtitlesviathediscmenuonly.Ifthisisthecase,presstheMENU button
and choose the appropriate subtitle on the disc menu.
Fast Forward / Fast Reverse
1. Press the
SEARCH buttonwhenaDVDisplaying.Eachtimeyoupressthe
SEARCH button, theplayback speedchanges inthe following sequence: (ForanAudio CD,pressand
hold the
SEARCHbuttontoperformfastforward/reverse.)
2. Press the
PLAYbuttonwhenyoureachthedesiredpointtoresumenormalplayback.
Notes:
• TheDVDplayermutessoundandsubtitlesduringreverseandforwardscanofDVDs.
• The
fastplaybackspeedmaydierdependingonthedisc.
Audio Selection
OnsomeDVDs,thesoundisrecordedintwoormoreformats.Followthedirectionsbelowtoselectthepreferred
language and sound system.
1.
While a disc is playing, press the AUDIO button to show the current audio format number.
2. Press the AUDIO button repeatedly to select the desired audio format.
Notes:
• IfonlyoneaudioformatisrecordedontheDVD,thenumberdoesnotchange.
• Some DVDsallowyouto changeaudioselections viathe discmenuonly.If this isthe case, pressthe MENU
button and choose the appropriate language on the disc menu.
• You
can select dierentaudio channels (Stereo,Mono Left, Mono Right orMix-Mono) onan AudioCD by
pressing the AUDIO button repeatedly.
Audio1/3:DolbyD2ch EnglishAudio1/3:DolbyD2ch English
Subtitle 02/03:SpanishSubtitle 02/03:Spanish
Printed in China
LimitedWarranty
AVC MULTIMEDIA (“AVC”) makes the following limited warranty. This limited warranty extend to the original
consumer purchaser and is limited to non-commercial use of the product.
One Year Parts & Labor Warranty
AVC products purchased in the United States or Canada are warranted to be free from defects in materials or
workmanship for a period of one year from the date of their original retail purchase. If the unit fails to conform to
this warranty, we will service the product using new or refurbished parts and products, at AVC’s sole discretion.
During a period of one year from the effective warranty date, AVC will provide, when needed, service labor to
repair a manufacturing defect at its designated Service Center. To obtain warranty service in the United States or
Canada, you must first call our Customer Support Center at 1-800-506-5746 or 1-877-252-6873, during the
hours listed in the box on the right. The determination of service will be made by AVC Customer Support. PLEASE
DO NOT RETURN YOUR UNIT TO AVC WITHOUT PRIOR AUTHORIZATION. New or remanufactured replacements for
defective parts or products will be used for repairs by AVC at its designated Service Center for one year from the effective
warranty date. Such replacement parts or products are warranted for an additional one year from the date of repair
or
replacement.TheCustomerwillberequiredtoshiptheunittotheServiceCenterindicatedatthetimeCustomer
Support is contacted to make the necessary repairs. The customer is responsible for all transportation charges to the
service facility.
Packaging and Shipping Instruction
When you send the product to the AVC service facility you must use the original carton box and packing material or an
equivalentasdesignatedbyAVC.
LIMITEDWARRANTY
Your Responsibility
1) You must retain the original sale receipt to provide proof of purchase.
2) These warranties are effective only if the product is purchased and operated in the United States or Canada.
3)
Warranties extend only to defects in material or workmanship, and do not extend to any product or parts
which have been lost or discarded, or damage to product or parts caused by misuse, accident, improper
operation or maintenance, or use in violation of instructions provided with the product, or to product which
has been altered or modified without authorization of AVC, or to products or parts thereof which have had
the serial number removed or changed.
Out of Warranty
All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular
purpose, are expressly limited to the duration of the limited warranties set forth above. With the exception of
any warranties implied by state law as hereby limited, the foregoing warranty is exclusive and in lieu of all other
warranties, guarantees, agreements and similar obligations of manufacturer or seller with respect to the repair or
replacement of any parts. In no event shall AVC
beliableforconsequentialorincidentaldamages.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these
warranties in any manner whatsoever. The time within action must be commenced to enforce any obligation of
AVC arising under the warranty or under any statute, or law of the United States or Canada or any state thereof, is
hereby limited to one year from the date of purchase. This limitation does not apply to implied warranties arising
under state law.
This warranty gives you specific legal rights and you may also have other rights, which may vary, from state to state.
Some states do not allow limitation on how long an implied warranty lasts, when an action may be brought, or the
exclusion
orlimitationofincidentalorconsequentialdamages,sotheaboveprovisionsmaynotapplytoyou.
For more information on other products and services, please visit our web site at
www.RCAav.com
Important:
Alsokeepyour"BillofSale"asproofofpurchase.
Model
no. .......................................................................... Product name ...........................................................................
Type of set .......................................................................... Serial no. .....................................................................................
Invoice no. .......................................................................... Date purchased .......................................................................
Dealer name ......................................................................
FORSERVICEANDREPAIR,PLEASEVISIT
www.RCAav.com
Specifications and external appearance are subject to change without notice.
©2009AVCMULTIMEDIA
Intheeventyourproductrequiresrepairafterthelimitedwarrantyperiodhasexpired,pleasecontactour
Customer Support Center at 1-800-506-5746, 1-877-252-6873 or
www.RCAav.com
Hours: Monday–Thursday: 9am–7pm, Friday: 9am–5pm, Saturday: 9am–NOON Eastern time.
Important:
You are responsible for any transportation, shipping or insurance relative to the return of product to our
Product Returns Center.