American Dynamics Tyco ADACTP01BNC User manual

Category
Networking
Type
User manual

American Dynamics Tyco ADACTP01BNC is a passive transmission device that can transmit video with up-the-coax (UTC) dome control signals over long distances using unshielded twisted pair (UTP) cables, point-to-point. These adapters use Category 2-6 twisted pair wires and do not require power. This compact device is compatible with existing CCTV equipment, has 50 dB cross-talk and noise immunity, and is compatible with NTSC or PAL formats. Additionally, it can work with any video device with composite video output and can carry up to four video signals on one Cat5 cable.

American Dynamics Tyco ADACTP01BNC is a passive transmission device that can transmit video with up-the-coax (UTC) dome control signals over long distances using unshielded twisted pair (UTP) cables, point-to-point. These adapters use Category 2-6 twisted pair wires and do not require power. This compact device is compatible with existing CCTV equipment, has 50 dB cross-talk and noise immunity, and is compatible with NTSC or PAL formats. Additionally, it can work with any video device with composite video output and can carry up to four video signals on one Cat5 cable.

SPECIFICATIONS
AD Twisted Pair Adapter
UNSHIELDED TWISTED PAIR VIDEO ADAPTER
www.americandynamics.net
Features
Compact, compatible with existing CCTV
equipment
No external power required
50 dB cross-talk and noise immunity
Compatible with NTSC or PAL formats
Compatible with Up-The-Coax (UTC) control
signals
Compatible with any video device with
composite video output
Get up to four video signals on one Cat5 cable
Model Number
ADACTP01BNC . . . . . . . . . . . .Cable accessory, twisted pair to BNC adapter
Operational
Video Format . . . . . . . . . . . . . .NTSC or PAL
Frequency . . . . . . . . . . . . . . . . . .DC to 10 MHz
Coax . . . . . . . . . . . . . . . . . . . . . . .75 Ohm
Twisted Pair . . . . . . . . . . . . . . .100 Ohms ± 20%, 24 AWG min.
Up to 300m (1000 ft)
Unshielded Category 2-6
Insertion Loss . . . . . . . . . . . . . .0.3 dB
CMRR . . . . . . . . . . . . . . . . . . . . .50 dB
Power . . . . . . . . . . . . . . . . . . . . . .No power required
Connectors
Video . . . . . . . . . . . . . . . . . . . . . .BNC
UTP . . . . . . . . . . . . . . . . . . . . . . .Euro-style terminal block
Environmental
Operating Temperature . . . . .-10° to 70°C (14° to 158° F)
Storage Temperature: . . . . . . .-30° to 70°C (-22° to 158° F)
Relative Humidity: . . . . . . . . . .0 to 95% RH, non-condensing
Mechanical
Dimensions . . . . . . . . . . . . . . . .47 x 13.6 mm
(1.85 x 0.54 in)
Weight . . . . . . . . . . . . . . . . . . . . .17g (0.7 oz)
Material . . . . . . . . . . . . . . . . . . . .Black ABS Plastic
Mounting . . . . . . . . . . . . . . . . . .Direct connection via BNC (Male)
Regulatory
Safety . . . . . . . . . . . . . . . . . . . . . .UL 94V-0
American Dynamics
Dome or Fixed Camera
Twisted Pair Adapter
(Dome End)
Twisted Pair Adapter
(Fixed Camera End)
Twisted Pair Adapter
(Switcher/Controller End)
Video Switcher/
Controller
CAT 2-6 UTP Cable
VS320-01 10/03 L
©2003 Sensormatic Electronics Corporation
Product specifications and availability subject to change without notice.
Certain product names mentioned herein may be trade names and/or
registered trademarks of other companies.
System Diagram
The American Dynamics ADACTP01BNC Twisted
Pair Video Adapter is a passive transmission device
that transmits video or video with up-the-coax
(UTC) dome control signals over unshielded
twisted pair (UTP) cables, point-to-point, for
distances up to 300m (1000 ft).
These adapters use Category 2-6 twisted pair wires
to transmit the video and dome control signals,
and do not require power. The compact design
allows for mounting directly to the video source or
receiver without additional cabling.
Some digital video recorders, video servers or similar products may
lose color information when UTP cable distances exceed 180 m (600 ft).
  • Page 1 1

American Dynamics Tyco ADACTP01BNC User manual

Category
Networking
Type
User manual

American Dynamics Tyco ADACTP01BNC is a passive transmission device that can transmit video with up-the-coax (UTC) dome control signals over long distances using unshielded twisted pair (UTP) cables, point-to-point. These adapters use Category 2-6 twisted pair wires and do not require power. This compact device is compatible with existing CCTV equipment, has 50 dB cross-talk and noise immunity, and is compatible with NTSC or PAL formats. Additionally, it can work with any video device with composite video output and can carry up to four video signals on one Cat5 cable.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI