Electrolux EFT520W is a cooker hood that can be used for air exhausting or air recycling. It has two motors with three speeds plus a position '0', and it comes with a grease filter and a carbon filter. The grease filter should be cleaned every 2-4 weeks, and the carbon filter should be replaced every 3-4 months. The hood can be mounted on the wall or under a wall cupboard, and it must be at least 60 cm above electric burners or 70 cm above gas or mixed-fuel burners when installed. The hood has a power cord with moulded plug with earth connection to be connected to a wall outlet of 230 V.
Electrolux EFT520W is a cooker hood that can be used for air exhausting or air recycling. It has two motors with three speeds plus a position '0', and it comes with a grease filter and a carbon filter. The grease filter should be cleaned every 2-4 weeks, and the carbon filter should be replaced every 3-4 months. The hood can be mounted on the wall or under a wall cupboard, and it must be at least 60 cm above electric burners or 70 cm above gas or mixed-fuel burners when installed. The hood has a power cord with moulded plug with earth connection to be connected to a wall outlet of 230 V.
Electrolux EFT520W is a cooker hood that can be used for air exhausting or air recycling. It has two motors with three speeds plus a position '0', and it comes with a grease filter and a carbon filter. The grease filter should be cleaned every 2-4 weeks, and the carbon filter should be replaced every 3-4 months. The hood can be mounted on the wall or under a wall cupboard, and it must be at least 60 cm above electric burners or 70 cm above gas or mixed-fuel burners when installed. The hood has a power cord with moulded plug with earth connection to be connected to a wall outlet of 230 V.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI