Zanussi ZHC917X3 User manual

Type
User manual

Zanussi ZHC917X3 is a cooker hood designed to be wall-mounted above a cooking hob. It can be used either by suction (external outlet) or filter (internal recycling). The versatility of the ducting fan unit on this hood enables it to be installed in one of four different ways:

  • Air outlet directed upwards (ducting or recirculation fitting)
  • Air outlet directed towards the wall (ducting fitting only)
  • Air outlet directed to the right or left (ducting fitting only) The cooker hood is made up of the following components:
  • Canopy C complete with controls and worktop illumination
  • Wall bracket S to fix the canopy hood

Zanussi ZHC917X3 is a cooker hood designed to be wall-mounted above a cooking hob. It can be used either by suction (external outlet) or filter (internal recycling). The versatility of the ducting fan unit on this hood enables it to be installed in one of four different ways:

  • Air outlet directed upwards (ducting or recirculation fitting)
  • Air outlet directed towards the wall (ducting fitting only)
  • Air outlet directed to the right or left (ducting fitting only) The cooker hood is made up of the following components:
  • Canopy C complete with controls and worktop illumination
  • Wall bracket S to fix the canopy hood
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

Zanussi ZHC917X3 User manual

Type
User manual

Zanussi ZHC917X3 is a cooker hood designed to be wall-mounted above a cooking hob. It can be used either by suction (external outlet) or filter (internal recycling). The versatility of the ducting fan unit on this hood enables it to be installed in one of four different ways:

  • Air outlet directed upwards (ducting or recirculation fitting)
  • Air outlet directed towards the wall (ducting fitting only)
  • Air outlet directed to the right or left (ducting fitting only) The cooker hood is made up of the following components:
  • Canopy C complete with controls and worktop illumination
  • Wall bracket S to fix the canopy hood

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI