Gamber-Johnson 7160-1591 Installation guide

Gamber-Johnson
Brand
Gamber-Johnson
Model
7160-1591
Category
Mounting kits
Type
Installation guide

This manual is also suitable for

Gamber-Johnson 7160-1591 is an adjustable overhead guard bar mount designed to attach to any overhead guard bar, straight or angled. It allows the user to mount a computer or dock to the clevis motion attachment. The mount can be adjusted vertically and horizontally to provide the optimal viewing angle. It is constructed from durable materials and is easy to install.

Gamber-Johnson 7160-1591 is an adjustable overhead guard bar mount designed to attach to any overhead guard bar, straight or angled. It allows the user to mount a computer or dock to the clevis motion attachment. The mount can be adjusted vertically and horizontally to provide the optimal viewing angle. It is constructed from durable materials and is easy to install.

Revision Form
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Product
INSTALLATION INSTRUCTIONS
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brake lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
guard cross bar
front overhead
front to back
overhead grate
bars
PS-001
Printing Spec:
mount. It is designed to attach to any overhead guard bar, straight or angled.
7160-1591 & 7160-1591-01
ADJUSTABLE OVERHEAD GUARD BAR MOUNT
INST-1035
© Copyright 2021 Gamber-Johnson, LLC
This instruction sheet is for the Gamber-Johnson adjustable overhead guard bar
Rev A
Attaching the mount:
1. Attach the mount to the front
overhead guard cross bar by placing the
back plate on the top side of the cross
bar (between 2 of the vertical grate bars
that run front to back) and bolting it in
place with (2) of the 3/8" dia. carriage
bolts supplied in hardware bag 7120-
0864.
Note: There are 3 different lengths of
carriage bolts in the hardware bag. Use
the set of bolts that best fits your
application.
2. Position the vertical mounting
bracket so it hangs straight downward
and tighten the (4) 3/8" dia. angle
adjustment bolts in place.
3. Adjust the vertical height of the
mount to the desired location and
tighten the (4) 3/8" dia. vertical
adjustment bolts in place.
4. Attach the computer or dock to the
clevis motion attachment.
vertical mounting bracket
back plate
clevis
overhead
vertical
adj. bolts
guard leg
angle
adj. bolts
  • Page 1 1

Gamber-Johnson 7160-1591 Installation guide

Gamber-Johnson
Brand
Gamber-Johnson
Model
7160-1591
Category
Mounting kits
Type
Installation guide
This manual is also suitable for

Gamber-Johnson 7160-1591 is an adjustable overhead guard bar mount designed to attach to any overhead guard bar, straight or angled. It allows the user to mount a computer or dock to the clevis motion attachment. The mount can be adjusted vertically and horizontally to provide the optimal viewing angle. It is constructed from durable materials and is easy to install.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents