Federal Brace FB-03197 Installation guide

www.federalbrace.com (877) 353-8899

Note this installation document should not be considered a specic recommendation for your particular application. Federal Brace

cannot provide installation guidelines to meet the particulars of every application. This document should be considered a help sheet

that provides considerations about the general characteristics of a particular type of product and installation.

NoMarr is Designed to protect various surfaces, metal, wood and plastics to name a few. NoMarr can be used for many applications

and industries. Federal Brace offers NoMarr both with and without fasteners. Using NoMarr is quick and easy, just follow the simple

four-step process below.

NoMarr Installation Instructions

NoMarr Surface Protection | NoMarr

2. Using a socket or driver tool, tighten the fastener down

completely. Do not remove NoMarr until the fastener is in its

nal position. See Spec Sheet for NoMarr sizing and compatible

fasteners. Use NoMarr with screwdrivers for slip protection.

1. Place the fastener through the hole in the Nomarr. The

NoMarr should be positioned between the head of the fastener

and the surface you want to protect.

www.federalbrace.com (877) 353-8899

For any questions or comments please to contact us by email at [email protected] or by phone at (877) 353-8899.

If you are a more of a visual learner check out our installation videos on our YouTube channel Don’t forget to share your projects

with your new Federal Brace brackets on Twitter and Instagram, just tag us @FederalBrace. Like us on Facebook, and check out our

boards on Pinterest for more home improvement/decor and DIY project ideas.

4. Repeat the process for all fasteners. Thanks to NoMarr, your

surfaces are now protected.

3. Grab the tab and rmly pull the NoMarr off with one uid

motion.

This manual is also suitable for

Download PDF