Firebird-Systems DCT411 Quick start guide

Brand: Firebird-Systems

Model: DCT411

Type: Quick start guide

Firebird-Systems DCT411 is a set-top box that allows you to watch TV. It comes with an HDMI cable, video/audio cables, a remote control, and two batteries. To use the device, connect the “Cable TV” cable to the “Cable In” connector on the set-top box. Then connect the HDMI or video/audio cables to the set-top box and TV. Finally, plug the power adapter into the set-top box and connect it to the AC power outlet.

1. IMPORTANT GUIDELINES

REVIEW THIS GUIDE IN ITS ENTIRETY BEFORE INSTALLING YOUR DCT411 SET TOP BOX. FOLLOW

THESE INSTRUCTIONS BEFORE CALLING SUPPORT.

2. PREPARING FOR INSTALLATION

2.1 Unpacking

Inspect the carton upon receiving and note any damage to the carton for possible unit damage.

Carton Includes:

(A) DCT411 Quick Start Guide

(B) DCT411 Unit

(D) HDMI Cable

p/n DCT411 Set Top Box

Quick Start Guide

(B)

(A)

(C)

(D)

(E)

(F)

Full Version Users Manual is at: http://www. Firebird-systems.com/graphics/dct411/DCT411-User-Manual.pdf

(G)

(E) Audio/Video Cables

(F) Remote Control

(G) Two (2) Batteries

3. INSTALLATION

3.1 Connecting the Set-Top Box- Remove power from the TV

- Connect the “Cable TV” cable to the “Cable In” connector on the set-top box (Figure 3.1)

- Connect the HDMI (D) or Video/Audio (E) cables to the set-top box and TV (Figure 3.2)

- Plug the TV into the power

- Plug the Power Adapter (C) into the set-top box and connect to the AC power outlet (Figure 3.3)

Figure 3.1

Figure 3.2

Figure 3.3

Cable TV

HDMI

Video/Audio

Power Adapter

- Change the source/input on the TV to either

HDMI or AV depending on how you connected

the TV to the set-top box

- The rst time the set-top box is powered on it

will scan for the TV channels and show the fol-

lowing screen (LEFT)

- Once the scan is completed, a display of de-

tected TV and Radio channels will appear. To

nish, press “OK” (RIGHT)

-After you have selected OK, you will be able to

view all detected channels on your TV

Rev. 043015

4. TROUBLESHOOTING

4.1 Reset to First Time Installation

If the set-top box is not working, then the rst item is to restart the rst time installation. This is done by

following these instructions:

1. With the TV switched on and the set-top box switched on, press the “MENU” button on the

remote control. This brings up the following menu:

2. Go right to the “Settings” option and press “OK.” This goes into the settings menu.

3. Go right to the “Version” option and press the DOWN button. Then press “OK” on the “Reset to

Factory Default” option. (This will ask you to conrm, press “OK”)

Full Version Users Manual is at: http://www. Firebird-systems.com/graphics/dct411/DCT411-User-Manual.pdf

4.2 Help Menu

More detailed information about set-top box functions can be found in the “Help” settings menu.

1. With the TV switched on and the set-top box switched on, press the “MENU” button on the

remote control. This brings up the following menu:

2. Move right to the “Help” option and press “OK.”

*The set-top box will then reboot and start a scan and nd all of the channels available. If this does

not work, please contact your cable operator for more troubleshooting options.

Rev. 043015

Firebird-Systems DCT411 Quick start guide

Brand: Firebird-Systems

Model: DCT411

Type: Quick start guide

Download PDF

report

Firebird-Systems DCT411 Quick start guide

Firebird-Systems DCT411 Quick start guide

Other documents