AmeriHome 801729 User guide

  • Hello! I am an AI chatbot trained to assist you with the AmeriHome 801729 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
AMCHAIR
Adirondack Mission Style Chair
Assembly Instructions
Max Weight Capacity 300 Lb
!
!
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
This manual provides important information on proper operation & maintenance. Every effort has been
made to ensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this product at any time without
prior notice.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,
DO NOT USE THIS PRODUCT!
DO NOT RETURN THIS PRODUCT TO THE RETAILER - CONTACT CUSTOMER SERVICE.
If you experience a problem, have questions or need parts for this product, visit our website
http://www.amerihomebrand.com or call Customer Service at 1-888-287-6981, Monday-Friday,
8 AM - 4 PM Central Time, or email : info@amerihomebrand.com. A copy of the sales receipt is required.
KEEP MANUAL, SALES RECEIPT & WARRANTY FOR FUTURE REFERENCE!
HARDWARE
!
!
!
(A) 4 1/2" Carriage Bolts 2 pieces
(C) Locking Nuts 6 pieces
(D) Washers 6 pieces
TOOLS YOU WILL NEED
Hammer 1/2" Ratchet 1/2" Wrench
PARTS LIST
Seat
Left Arm
Right
Arm
(B) 3 1/2" Carriage Bolts 4 pieces
Right Front
Leg
Left Rear
Leg
Left Front
Leg
Right Rear
Leg
#4!
ASSEMBLY INSTRUCTIONS
!
1) Lay!chair!seat!and!chair!back!on!ground!as!shown!in!
photo!at!right.!Insert!a!3!½”!carr iag e!b o lt!a t!the !b o tto m !
of!the!chair!back!from!inside!out!to!hold!chair!back!and!!
chair!seat!together.!Do!not!add!washer!and!locking!nut.!!
This!is!just!to!hold!in!place.!!
!
!
!
!
!
!
2) Rest!the!chair!seat!and!chair!back!on!the!box!! !
that!the!chair!came!in.!!
!
!
!
!
!
!
3) Take!the!left!arm!rest!and!place!bolts!in!each!predrilled!
hole!on!the!front!and!back!leg.!Use!a!3!½”!carriage!bolt!on!!
the!front!leg!an d !a!4!½ ”!carria ge !bolt!o n!the !ba ck!leg .!You!
will!insert!bolts!just!far!enough!so!they!are!showing!thro u gh!
on!the!back!side.!!
!
!
!
!
!
4) Align!the!bolts!with!the!preJdrilled!holes!on!the!left!side!of!
the!chair!seat.!!
!
Note:!!The!bolt!in!the!back!leg!of!the!arm!rest!will!run!through!
the!leg!of!the!arm !rest,!the!se at!bo ttom!and!the!bo ttom !o f!the!
chair!back.!This!should!push!the!3!½”!carriage!bolt!in!the!chair!!
back!and!seat!bottom!(which!was!inserted!in!step!1)!out.!!
!
!
#2!
Package!
Box!
Left!Arm !
Rest!
#3!
5) Repeat!steps!3!and!4!on!opposite!side!and!tighten.!Use!hammer!to!
set!carriage!bolts.!Use!!½”!ratchet!to!tighten!all!bolts!with!a!washer!
and!locking!nut.!!
!
Product!should!look!like!photo!at!right.!
!
!
!
!
!
!
!
!
!
!
!
!
6) Align!th e !p re J drilled!holes!in!the!back!of!the!arm!rest!!
and!the!middle!of!the!chair!back.!Insert!3!½”!carriage!bolt.!!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
8) !Repeat!on!opposite!side!to!complete!assem bly.!
!
7)!!Use!a!hammer!to!set!the!carriage!
bolt.!Then!add!the!washer!and!locking!
nut!and!tighten!using!½”!wrench.!!
!
/