IMPORTANT:

• ALLINSTALLATIONWORKSHOULDBEDONEBYACCREDITEDPROFESSIONAL.

• SHUTOFFPOWERSUPPLYATFUSEORCIRCUITBREAKER!

• USEONLYTHESPECIFIEDBULBS.DONOTEXCEEDTHEMAXIMUMWATTAGE!

CONNECTING THE WIRES

4.Attachthexture’swirestothepowersupplywiresfromthejunctionbox.Connectblacktoblack(orsmooth);whitetowhite(or

ribbed);groundtoground(greenorcopper).Twisttheendsofthewirepairstogether,thentwistonawireconnector.Makesure

alltwistsareinthesamedirection.Ifthereisnogroundwire(greenorcopper)fromthejunctionbox,locategroundscrew(E)on

mountingstrap(B)andwrapthexture’sgroundwirearoundthegreengroundscrew(E).Useascrewdrivertosecuregroundscrew

Yourinstallationisnowcomplete.Turnonthepowerandtestthexture.

For Customer Service, please

contact the place of purchase.

AssemblyInstructions:1048-BA2, BA3 (Chatham)

CLEANING TIPS

Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the

xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.

PREPARING FOR

INSTALLATION

Removeallofthecontentsfrom

pairsofthreadedholes.Findthepair

ofholesthatmatchesthespacing

oftheholesonthejunctionboxand

yourxture’sbackplate.

2.Lineuptabs(C)withtheholesin

thetopofbackplate(F).

House Wires

Fixture Wires

Hot

3.Pullthehousewiresthroughthecenterofmountingstrap(B).Securemountingstrap(B)tothejunctionboxwithmountingscrews

(A)andascrewdriver.Tightenthescrewssecurely.