Broadcom HSMS-285x Equivalent Circuit Model User guide

HSMS-285x

HSMS-285x Equivalent Circuit Model

parameter units value

Lp (Vbr) nH 2

Cp pF 0.08

Rs ohm 25

Rj ohm (8.33E-5)(1.06)(Temp in Kelvin)

(3E-6 + I bias in A)

Cj pF 0.18

This library of models is being supplied to users as an aid to circuit designs. While it reflects reasonably close similarity to

the actual devices in terms of performance, it is not suggested as a replacement for lab evaluation. Simulation should be

used as a forerunner or a supplement to traditional lab testing.

Users should very carefully note the following factors regarding these models:

• Model performance in general will reflect typical baseline specs for a given device, and certain aspects of

performance may not be modeled fully.

• While reasonable care has been taken in their preparation, we cannot be responsible for correct application on any

and all computer systems.

• For future model improvements, Agilent Technologies reserves the right to change these models without prior

notice.

• For actual design guidelines, please refer to current data sheet for the device. Only the data sheet provides actual

performance guarantee.