Broadcom HSMS-286x Equivalent Circuit Model User guide

HSMS-286x

HSMS-286x Equivalent Circuit Model

parameter units value

Lp (Vbr) nH 2

Cp pF 0.08

Rs ohm 5

Rj ohm (8.33E-5)(1.08)(Temp in Kelvin)

(3E-8 + I bias in A)

Cj pF 0.18

This library of models is being supplied to users as an aid to circuit designs. While it reflects reasonably close

similarity to the actual devices in terms of performance, it is not suggested as a replacement for lab evaluation.

Simulation should be used as a forerunner or a supplement to traditional lab testing.

Users should very carefully note the following factors regarding these models:

• Model performance in general will reflect typical baseline specs for a given device, and certain aspects of

performance may not be modeled fully.

• While reasonable care has been taken in their preparation, we cannot be responsible for correct

application on any and all computer systems.

• For future model improvements, Agilent Technologies reserves the right to change these models without

prior notice.

• For actual design guidelines, please refer to current data sheet for the device. Only the data sheet

provides actual performance guarantee.