Mutual Industries 15903-2 Operating instructions

Assembly Instructions - Mutual Industries Folding Yellow Steel Stanchion

Mutual Industries Folding Yellow Steel Stanchion has 4 parts.

1. Flat base leg

2. Curved base leg

3. Vertical stanchion post

4. Locking Ring.

Stanchion ships with locking ring holding all other parts together.

To assemble:

1. Remove locking ring.

2. Using handle grip, lift vertical stanchion post.

3. Turn curved base leg 90 degrees to form cross with flat base leg.

4. Insert vertical stanchion post on pin pointing up from base.

5. Line up holes on stanchion post and base pin.

6. Push Locking Ring through holes in stanchion post and base pin.

7. Secure Locking Ring.

End of each base leg has nail hole to secure stanchion to roof for stability.

Download PDF