Panasonic HDCSD5 Owner's manual

Category
Optical disc drives
Type
Owner's manual

This manual is also suitable for

Easy editing
Operating
Instructions
High-definition Image Management/Easy Editing Software
HD Writer 2.0E for SX/SD
Before use, please read these
instructions completely.
VQT1K17
Cover
Introduction
Copying
Simple
guide
Settings/
Convenient
information
© 2007 Matsushita Electric Industrial Co., Ltd.
Play back
ENG-HDW20.book 1 ページ 2007年6月29日 金曜日 午後1時40分
2
Contents
Introduction
What can the software do?.................................................4
Read before starting operation ...........................................8
Operating environments ...................................................10
Available Cards/Discs/Files ..............................................13
Connecting the video camera to a PC..............................17
Simple guide 19
Start
Start ..................................................................................24
To close the software .............................................................. 25
Play back
Play back a card or a disc.................................................26
To start AVCHD PLAYER from the [Start Menu] window........ 26
To start AVCHD PLAYER using automatic detection
(only in Windows
®
XP/Windows Vista
TM
)................................ 27
Play back................................................................................. 28
Copy
Copy function ................................................................... 29
Names and functions of the respective parts
on the Copy window.................................................................31
Copy images on an SD card or a DVD disc
to the hard disk................................................................. 34
Copy images on the hard disk to a card or a disc ............ 37
Copy data between a card and a disc.............................. 39
Easy edit
Easy edit function............................................................. 41
Start the Edit window first ........................................................42
Names and functions of the respective parts
on the Edit window................................................................... 43
Names and functions of the respective parts
on the Preview window ............................................................48
Names and functions of the respective parts
for the Top menu production window.......................................50
Confirm the contents of image data ................................. 54
Confirm the videos (Preview) ........................................... 56
Switch the image display format....................................... 58
Edit image data ............................................................59
Copy/delete image data ................................................... 60
Delete/produce top menu................................................. 62
Split a scene..................................................................... 64
Delete a scene ................................................................. 66
Contents
ENG-HDW20.book 2 ページ 2007年6月29日 金曜日 午後1時40分
3
Contents
Merge scenes ...................................................................67
Delete a video...................................................................69
Change the folder name ...................................................70
Output images in MPEG2 format......................................71
Convert part of motion picture into picture........................73
Collect and record your favourite images.................... 74
Prepare for recording images (Image recording list) ........75
Record in the AVCHD standard........................................77
Record in DVD-Video format ............................................81
Settings/Convenient information
Detailed settings for the respective functions ...................85
Confirm/change detailed information about images .........89
Disc format........................................................................90
Menu list ...........................................................................92
When a problem occurs....................................................94
ENG-HDW20.book 3 ページ 2007年6月29日 金曜日 午後1時40分
4
Introduction
What can the software do?
Image data
*1
in the AVCHD standard recorded with a
high-definition video camera, etc. can be copied between
PCs, SD cards, and DVD discs, and easily edited.
*1: Operations are guaranteed only for image data in the AVCHD
standard recorded on a video camera supported by this software
(l11). Images recorded on other video cameras or created by
other software may not be operated correctly.
Images recorded in STD mode (DVD-Video format) of video
cameras are not compatible.
Images on cards and disc can be played back in
hi-definition quality!
Image in the AVCHD standard on media can be reproduced
in high-definition quality using an AVCHD PLAYER. (l26)
When the SD card or DVD disc is full, image data can
be copied to the hard disk and stored!
Image data on an SD card or DVD disc
*2
can be copied to
the hard disk of your PC.
When the SD card, DVD-RAM disc, or DVD-RW disc used for
video camera recording is full, copy the data to the hard disk
to use the same media for recording again. (l34)
*2: Before copying the DVD-RW disc, DVD-R disc, and DVD-R DL
(dual layer on single side) disc in the AVCHD standard recorded by
video camera, the discs must be finalized with the video camera
used for the recording.
Playback function
Copy function
SD card
High-definition
video camera
ENG-HDW20.book 4 ページ 2007年6月29日 金曜日 午後1時40分
5
What can the software do?
Introduction
Copy to an SD card or a DVD disc to play in
high-definition quality!
Images copied to an SD card or a DVD disc can be played
back in the player that supports the AVCHD standard
(high-definition video camera etc.) in high-definition quality.
(l37)
Image data on the media can also be played back using the
AVCHD PLAYER with this software. (l26)
A copy is also possible between an SD card and a
DVD disc!
Image data can be copied between the SD card and the DVD
disc with this software. (l39)
Editing the image data stored on a hard disk is simple!
It is possible to split or delete scenes and produce the top
menu on the image data on the hard disk. (l59)
Image can also be output in MPEG2 format, which is
compatible with DVD-Video.
*3
(l71)
*3: An MPEG2 file cannot be recorded on media with this software.
To do this, use DVD-Video creation software.
(Create a DVD-Video with this software by recording images on the
hard disk (in AVCHD format) in DVD-Video format (l81).)
SD card
Player that
supports the
AVCHD standard
SD card
Easy edit function
ENG-HDW20.book 5 ページ 2007年6月29日 金曜日 午後1時40分
6
What can the software do?
Introduction
Collect and record your favourite image to an SD card
or a DVD disc!
Collect your favorite videos and scenes from among several
image data sources, and then record it on an SD card or a
DVD disc in the AVCHD standard.
You can also record it on a DVD-RW disc or DVD-R disc in
DVD-Video format. (l74)
Attention
z When data on cards or discs are played back using this
software, frames tend to be missed because many CPUs
are needed.
Use a player, including a video camera, that supports the
AVCHD standard for smooth image playback.
Tip
z Available cards/discs/files: l13
SD card
AVCHD
standard
DVD-Video
format
AVCHD format images
Individual
videos
Individual
scenes
Important Notice
SD cards and DVD discs in the AVCHD standard
produced by this software can be played back only on
players that support the AVCHD standard. (They cannot
be played back on an ordinary DVD player that does not
support the AVCHD standard.)
Do not insert the discs into any device that does not
support the AVCHD standard, because the discs may
not be ejected or the device may delete data on the disc
after displaying a message prompting format of the
discs.
In addition, the top menu can be displayed only on a player capable
of playing back the top menu. (The top menu will not display on a
high-definition video camera.)
ENG-HDW20.book 6 ページ 2007年6月29日 金曜日 午後1時40分
7
What can the software do?
Introduction
Scene
This means the image recorded during one recording (after
starting recording until it is stopped).
Scene can also be split with this software.
Video
This means an image file. For the images recorded on a
high-definition video camera, the scenes that were recorded
on the same day will be treated as a video.
If a single scene has been recorded over several days, the
date when the recording started shall be the recording date
for that scene.
Image data
This means the folder structure in the AVCHD standard, the
recorded video, and the set of associated data, which are
created when an image is recorded in the AVCHD standard.
When copying an image with this software, all of this image
data is copied.
Only when copying from an SD card to a hard disk and
when copying from a hard disk to an SD card, the folder
structure in the DCF standard, pictures (JPEG format)
recorded in the folder, and the set of related data are also
copied as image data.
Type of images (scene, video, image data)
Video1
Video2
Scene1 Scene2 Scene3 Scene1 Scene2
ENG-HDW20.book 7 ページ 2007年6月29日 金曜日 午後1時40分
8
Introduction
Read before starting operation
Contents of these operating instructions
The description of Windows
®
in these operating
instructions is based on the Windows Vista
TM
screen.
Please note that the explanations and screen images in
these operating instructions may differ from the actual
explanations and screen images due to version upgrades
of the software and the use environments of PCs.
Basic operations and basic terms for the PC are not
explained in these operating instructions. For information,
refer to the operating instructions of the PC.
Reference pages are indicated with a “l00” in these
operating instructions.
Terms used in these operating instructions
In these operating instructions, HD Writer 2.0E for SX/SD is
as also referred to as “HD Writer”.
General information about using the software
Do not execute the following operations while the software
is running. Doing so may cause defects (damage to SD
cards or DVD discs, etc.).
- Turn off the PC or video camera, or restart the PC.
- Switch the user or log off.
- Change the screen settings.
- Use the screen saver or the power saving functions
(makes the PC enter the standby or sleep modes after a
certain time has elapsed without any operation on the PC).
- Use other software (recording or encoding software with
high CPU demand and memory requirements, in
particular).
- Use the shared drive of another PC connected to the
network.
- Revise or delete files and folders required by the software.
Use an AC adaptor (and a battery) to power the notebook PC
and video camera. If the battery capacity drops too low
during data transfer, recording or copying operations may
not function properly.
Treatment of important images
Confirm that images are properly recorded on an SD card
or a DVD disc before the actual recording of images on the
media. Verify that the images are recorded properly on the
SD card or DVD disc, and then delete the original data on
the hard disk.
When editing images, the original data is edited directly
and cannot be restored. To retain the original data, first
make a backup copy of image data (l60) before editing.
Copyright
The recorded and/or edited content is for personal use only and may
not be reproduced or copied without prior consent.
•Microsoft
®
, Windows
®
, Windows Vista
TM
, DirectX
®
, DirectDraw
®
and
DirectSound
®
are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
•IBM
®
and PC/AT are registered trademarks of International Business
Machines Corporation of the U.S.
Intel
®
, Core
TM
and Pentium
®
are registered trademarks or trademarks
of Intel Corporation in the United States and the other countries.
miniSD logo is a trademark.
SDHC logo is a trademark.
ENG-HDW20.book 8 ページ 2007年6月29日 金曜日 午後1時40分
9
Read before starting operation
Introduction
Microsoft product screen shot(s) reprinted with permission from
Microsoft Corporation.
•LEADTOOLS
Copyright© 1991-2005 LEAD Technologies, Inc.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
Confidential unpublished works. Copyright 1992-1997 Dolby
Laboratories. All rights reserved.
Other names of systems and products mentioned in these instructions
are usually the registered trademarks or trademarks of the
manufacturers who developed the system or product concerned.
This product is licensed under the AVC patent portfolio license for the
personal and non-commercial use of a consumer to (i) encode video in
compliance with the AVC Standard (“AVC Video”) and/or (ii) decode
AVC Video that was encoded by a consumer engaged in a personal
and non-commercial activity and/or was obtained from a video
provider licensed to provide AVC Video.
No license is granted or shall be implied for any other use.
Additional information may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.
ENG-HDW20.book 9 ページ 2007年6月29日 金曜日 午後1時40分
10
Introduction
Operating environments
System requirements for installation of HD Writer.
PC:
IBM
®
PC/AT compatible personal computer with an Intel
®
Pentium
®
III 1.0 GHz or higher CPU (including
compatible CPU) (When using Playback function and the MPEG2 output function, Intel
®
Core
TM
2 Duo
1.86 GHz or higher, or Intel
®
Pentium
®
D 3.0 GHz or higher is recommended.)
OS:
Preinstalled
Microsoft
®
Windows Vista
TM
Ultimate
Microsoft
®
Windows Vista
TM
Home Premium
Microsoft
®
Windows Vista
TM
Home Basic
Microsoft
®
Windows
®
XP Home Edition SP2
Microsoft
®
Windows
®
XP Professional SP2
Microsoft
®
Windows
®
2000 Professional SP4
*1
*1: HDC-DX1 is not supported by Windows
®
2000.
RAM:
Windows Vista
TM
: 1024 MB or more,
Windows
®
XP/2000: 512 MB or more (1024 MB or more recommended)
Display:
High Colour (16 bit) or more (32 bit or more recommended)
Desktop resolution 1024 k 768 pixels or more (1280 k 1024 pixels or more recommended)
Windows Vista
TM
: Graphics card complying with DirectX
®
10, and DirectDraw
®
overlay
Windows
®
XP/2000: Graphics card complying with DirectX
®
9.0c, and DirectDraw
®
overlay
A PCI Express
TM
x 16 supported unit is recommended
Hard disk:
Ultra DMA-100 or more
Available hard disk capacity of 250 MB or more for installation
(When writing to DVD, the twice amount of free space as the disc is necessary.)
If the compression setting is enabled, errors will occur during recording. Clear the check for [Compress this drive to
save disk space] in [Properties] for the hard disk drive.
ENG-HDW20.book 10 ページ 2007年6月29日 金曜日 午後1時40分
11
Operating environments
Introduction
Even if the system requirements mentioned in these operating
instructions are fulfilled, some personal computers cannot be used.
Supplied CD-ROM is available for Windows only.
This software is not compatible with Windows
®
3.1, Windows
®
95,
Windows
®
98, Windows
®
98SE, Windows
®
Me, and Windows NT
®
.
When 2 or more USB devices are connected to a PC, or when devices
are connected through USB hubs or by using extension cables, proper
operation is not guaranteed.
Operation on an upgraded OS is not guaranteed.
Operation on an OS other than the one pre-installed is not guaranteed.
This software does not support the multi-boot environments.
Windows
®
XP/2000: Log on with an administrator account before
using this software.
Windows Vista
TM
: Log on with an administrator account or a standard
user account before using this software. The software will not function
with a GUEST account.
(Installation and uninstallation of the software requires an
administrator account.)
Operation is not guaranteed on Windows Vista
TM
Business/Enterprise,
Windows
®
XP Media Center Edition, Tablet PC Edition and not
compatible with 64-bit operation systems.
For fonts and screen settings, use the standard Windows
®
settings.
Characters may not display properly depending on the settings.
This software cannot be used simultaneously with other time-shifting
image editing software or video capture products. Note that other
software running background processes, timer recording in particular,
Necessary software:
Windows Vista
TM
: Microsoft
®
DirectX
®
10,
Windows
®
XP/2000: Microsoft
®
DirectX
®
9.0c
If HD Writer is installed on a PC that does not support the above DirectX
®
, the software may not function properly. If
you do not know whether your PC supports the required version of DirectX
®
, contact the manufacturer.
Sound:
DirectSound
®
support
Drive:
CD-ROM drive (for installation)
(When writing to DVD, a compatible drive and media are necessary.)
Interface:
USB port (High-speed USB (USB2.0))
Supported
high-definition video
camera:
Panasonic HDC-SD1/SD5, HDC-DX1
*2,3
, HDC-SX5
*2
*2: Images cannot be recorded on media in the video camera from a PC even if the HDC-DX1 is connected to the PC.
If the HDC-SX5 is connected to the PC, images cannot be recorded on a DVD disc. (If images cannot be
recorded, the video camera will not be displayed as the destination for recording.)
Also, data cannot be added to a DVD-RAM disc or a DVD-RW disc produced with this software by using the
HDC-DX1/SX5.
*3: Since video recorded on an SD card cannot be played back on the HDC-DX1, a warning message will be
displayed when attempting to record to an SD card that was formatted with the HDC-DX1.
Other requirements: Mouse or equivalent pointing device
ENG-HDW20.book 11 ページ 2007年6月29日 金曜日 午後1時40分
12
Operating environments
Introduction
may cause HD Writer to malfunction.
HD Writer operates only when the built-in clock on the PC is set to a
value within the following range.
From 0:00 on January 1, 1970, to 23:59 on December 31, 2037
If the built-in clock is set to a value outside this range, this software
cannot be activated and will not operate properly.
ENG-HDW20.book 12 ページ 2007年6月29日 金曜日 午後1時40分
13
Introduction
Available Cards/Discs/Files
*1: SD cards with a capacity of less than 32 MB cannot be used.
Operations with SD cards where the capacity is from 32 MB to
128 MB are not guaranteed.
*2: DVD-RAM discs of the 2.6 GB and 5.2 GB double sided type cannot
be used.
A new DVD-RAM disc must be formatted with this software before use.
*3: DVD+R discs and DVD+RW discs cannot be used.
*4: Before copying the DVD-RW disc, DVD-R disc, and DVD-R DL
(dual layer on single side) disc in the AVCHD standard recorded by
video camera, the discs must be finalized with the video camera
used for the recording.
*5: SD cards recorded in the AVCHD standard and used DVD-RW
discs cannot be used without formatting. Initialization (formatting)
is required before use. (Once the card or disc is formatted, all data
on the card or disc will be deleted.)
(How to format DVD discs: l90) (SD cards must be formatted with
the video camera that this software supports (l11). The cards
formatted with incompatible camera cannot be used.)
*6: If the DVD-RW discs and DVD-RAM discs are protected, data
cannot be copied to the discs. Clear the settings by using the
device that write protected the disc or enable the [Auto Protect]
settings (l86).
Type of media
SD card
(SD memory
card/miniSD card
256 MB to 2 GB
*1
,
SDHC memory
card 4GB to 8 GB)
DVD-RAM
*2
8 cm/12 cm
Single sided/
Double sided
DVD-RW
*3
8 cm/12 cm
Single sided/
Double sided
DVD-R
*3
8 cm/12 cm
Single sided/
Double sided/
Dual layer on
single side
Hard disk
Unused/Recorded Unused/Recorded Unused/Recorded Unused s
What it can do
Copy
Copy image data on a DVD disc ±
*
5
(l39) aa a± (l34)
Copy image data on an SD card
*6
(l39) ±
*5, 6
(l39) ± (l39) ± (l34)
Copy image data on a hard disk ±
*5
(l37) ±
*6
(l37) ±
*5. 6
(l37) ± (l37) s
Edit image data (l59) aaa a±
Record
Record in the AVCHD standard (l77) ±
*5
±
*6
±
*5. 6
±a
Record in the DVD-Video format (l81) aa±
*5
±a
Format (l90) a
*7
±± as
ENG-HDW20.book 13 ページ 2007年6月29日 金曜日 午後1時40分
14
Available Cards/Discs/Files
Introduction
*7: This software cannot initialize SD cards. Use a video camera
supported by this software (l11).
Tip
z Operations are guaranteed only for image data in the
AVCHD standard recorded by a video camera supported
by this software (l11). Image recorded by a different
camera and created by other software will not copy,
record, or display properly.
Image recorded in STD mode (DVD-Video format) of video
cameras are not compatible.
z Use a supported video camera (l11) to initialize SD
cards. (Initialization will delete recorded data.) A warning is
displayed when an SD card that is not initialized by a
supported camera is inserted.
Data length that can be recorded on a DVD disc or an
SD card
For copying or recording images (AVCHD format), the data
length that can be recorded on a single SD card or a single
DVD disc shall be as follows.
(The following values are estimates. The actual length may
be shorter than as indicated.)
Data length that can be recorded (Minutes)
Important Notice
SD cards and DVD discs in the AVCHD standard
produced by this software can be played back only on
players that support the AVCHD standard. (They
cannot be played back on an ordinary DVD player that
does not support the AVCHD standard.)
Do not insert the discs into any device that does not
support the AVCHD standard, because the discs may
not be ejected or the device may delete data on the
disc after displaying a message prompting format of
the discs.
In addition, the top menu can be displayed only on a player capable
of playing back the top menu. (The top menu will not display on a
high-definition video camera.)
Recording mode when recording
the original data
HG mode
(High
quality)
HN mode
(Standard)
HE mode
(Long
duration)
SD card (2 GB) 20 29 44
SD card (4 GB) 40 58 88
DVD disc
(8 cm)
Single sided 14 20 31
Dual layer on single side 26 38 57
DVD disc
(12 cm)
Single sided 48 69 104
Dual layer on single side 87 125 188
ENG-HDW20.book 14 ページ 2007年6月29日 金曜日 午後1時40分
15
Available Cards/Discs/Files
Introduction
DVD drive
To copy the image on a DVD disc or to record data on a
disc, a DVD drive or video camera that can read and record
on each disc is required. (For the operation method, refer to
the operating instructions of your PC or DVD drive.)
If the DVD drive is being used by another software (Explorer,
etc.), the drive cannot be used with this software. Close the
software before using the drive with this software.
(If the drive is being used by this software, the drive cannot
be used with another software.)
Before using this software, ensure that the transfer mode of
the DVD drive is set to [DMA]. If it is not set to [DMA], set it
to [DMA] by referring to the operating instructions of your
DVD drive. (It may be impossible to set it to [DMA]
depending on your PC.)
Images protected by copyright
Playing, copying, and editing recorded images protected by
copyright, such as data that can be recorded only once
(copy-once), is prohibited.
It is also impossible to use DVD videos produced by other
software or commercially available DVD videos.
Initialization (Format) of discs
A new disc must first be formatted. (Always format DVD-RAM
discs. Format is not required for DVD-R discs and DVD-RW
discs that are already initialized.)
Format the disc on this software. (l90)
Treatment of discs
For treatment of the respective discs, refer to the operating
instructions for PCs and DVD drives too. Note that stained
or damaged discs may be impossible to record onto and
read.
A disc may not be recognized or data may not be
recorded properly even if the DVD drive supports the
discs, due to the affinity between the disc and the
drive. Select discs that are recommended for the drive
by referring to the operating instructions of the PC and
the DVD drive.
Recording
Images without sound or images of less than 1 second
cannot be recorded.
This software cannot produce DVD audio, video CD, or
miniDVD.
Recording speed
The recording speeds (2k, 4k, etc.) for DVD drives and
DVD discs indicate the maximum speed and not the actual
recording speed. (Speeds may vary depending on the
combination of drive and disc or the use conditions.)
Operation during recording
If the following actions are executed while the data is being
recorded into a disc, recording may not be completed
properly, and the disc or device may be damaged.
- Operations for logging off from Windows
®
, such as user
switching operation.
- Operation of other recording software. (Or while other
Notes on use of DVD discs
ENG-HDW20.book 15 ページ 2007年6月29日 金曜日 午後1時40分
16
Available Cards/Discs/Files
Introduction
recording software is running, start recording with this
software.)
- Connection cables for a PC or DVD device are inserted or
removed, or the power is turned on or off.
- This software is forcibly closed.
- When using an external DVD drive, do not remove or
insert the connection cable while data is being recorded.
Doing so may cause the software to malfunction or corrupt
the data.
Playback and use of produced discs
Created discs in AVCHD standard cannot be accessed with
software that does not support the AVCHD standard. (Since a
disc where the data are recorded in AVCHD standard is
recorded in UDF 2.5 format, files on the disc cannot be
displayed with Windows
®
Explorer in an environment that
does not support the UDF 2.5 format.)
For DVD-R discs with dual layer on single side, images may be
frozen or sounds may be inaudible for a moment when shifting
from the first layer to the second layer, depending on the
player.
Do not delete or revise the folders on the discs and the files in
the folders. The data may not play back.
To copy the image data on an SD card or to record data on
an SD card, a video camera or an SD card reader/writer
that can read and record on an SD card are required. (For
an SDHC memory card (4 GB to 8 GB), a device
supporting the SDHC will be required.)
(For the operation method, refer to the operating
instructions for each device.)
Use a video camera supported by this software (l11) to
initialize (format) SD cards
. (For methods of formatting SD
cards, refer to the operating instructions of the video
camera.)
If the write-protect switch has been set to [LOCK],
recording is not possible.
Do not delete or revise the folders on the produced cards and
the files in the folders. The data may not play back.
Notes on use of SD cards
ENG-HDW20.book 16 ページ 2007年6月29日 金曜日 午後1時40分
17
Introduction
Connecting the video camera to a PC
Copy image data on an SD card or a DVD disc to the hard
disk on your PC or record image data on a hard disk onto an
SD card by connecting the high-definition video camera to
the PC.
Attention
z For details, refer to the operating instructions for the video
camera too.
z Use an AC adaptor (and a battery) to power the notebook
PC and video camera. If the battery capacity drops too low
during data transfer, recording or copying operations may
not function properly.
1.
Prepare the video camera.
Turn on the power to the video camera.
Set the video camera to the mode for connecting to a
PC. (For details, refer to the operating instructions for
the video camera.)
2.
Connect the video camera to the PC using the USB
connection cable after turning on the power and
booting up the PC.
Insert the cable into the USB port firmly.
3.
Confirm that the video camera is recognized by the
PC.
When [Removable Disk] appears in [Computer] ([My
Computer]), the video camera is recognized properly by
the PC.
For some types of camera, a DVD drive will also be added.
Either an SD drive or a DVD drive specified at
connection will appear when connecting the HDC-SX5.
Tip
z For some types of video cameras connected to a PC, two
drives, the SD card, and the DVD disc are displayed as the
source for copying images.
z If a video camera that cannot record images from a PC is
connected, the images cannot be recorded onto media.
(The video camera will not be displayed as the destination
for recording.)
z Check that a card is not being accessed by the video
camera, disconnect the USB connection cable and then
turn off the power on the video camera.
z Double-click the [ ] ([ ]) icon on the task tray, and
select [USB Mass Storage Device] and then click the
[Stop] button to remove the cable safely without displaying
an error message.
ENG-HDW20.book 17 ページ 2007年6月29日 金曜日 午後1時40分
18
Connecting the video camera to a PC
Introduction
z Do not remove the USB connection cable nor operate the
video camera while data on the video camera is being
transferred. Doing so may cause a malfunction of the
software or damage the data being transferred.
z The shape of the USB terminal varies with each model of
video camera. Use the USB connection cable that fit to the
video camera.
ENG-HDW20.book 18 ページ 2007年6月29日 金曜日 午後1時40分
19
Simple guide
Here, the following two typical operations using the copy function of this software are briefly described:
1 Copy the image data on a full media (SD card, DVD disc) to the hard disk.
2 Copy the stored image data to a media for playback with a high-definition video camera.
More details (l34)
Preparation:
z Set an SD card or a DVD disc. (Example: Insert it in the video camera and connect the video camera to the PC. (l17))
z Only image data (l7) can be copied.
If any data other than image data are recorded on a media, they may not be copied.
It is also possible to start by double-clicking
[ ] on the desktop.
1 To copy the image data on media to the hard disk
1
From the start menu, select [All Programs] >>
[Panasonic] >> [HD Writer 2.0E] >> [HD Writer].
2
Click [Copy to PC] button.
ENG-HDW20.book 19 ページ 2007年6月29日 金曜日 午後1時40分
20
1 To copy the image data on media to the hard disk
Simple guide
Up to 24 scenes on the media are displayed in
thumbnails.
Select the storage folder in the upper column. Enter
the name of the copy destination folder, which is
created in the storage folder, in the lower column.
After a copy is made from an SD card, select
[Yes] in the following message to delete the
image data from the source. (Only the image
data will be deleted; no other data will be
deleted.)
3
Select a media from which the image data will be
copied.
4
Specify the destination where the image data will
be copied.
5
Click [Start copying] button.
6
When the confirmation message is displayed,
click [Yes].
ENG-HDW20.book 20 ページ 2007年6月29日 金曜日 午後1時40分
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102

Panasonic HDCSD5 Owner's manual

Category
Optical disc drives
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI