Sony HT-IV300 Operating instructions

Brand: Sony

Model: HT-IV300

Type: Operating instructions

4-486-848-13(1)

HT-IV300

Home Theatre

System

Operating Instructions

Do not install the appliance in a confined

space, such as a bookcase or built-in cabinet.

To reduce the risk of fire, do not cover the

ventilation opening of the appliance with

newspapers, tablecloths, curtains, etc.

Do not expose the appliance to naked flame

sources (for example, lighted candles).

To reduce the risk of fire or electric shock, do

not expose this appliance to dripping or

splashing, and do not place objects filled with

liquids, such as vases, on the appliance.

Do not expose batteries or appliances with

battery-installed to excessive heat, such as

sunshine and fire.

To prevent injury, this apparatus must be

securely attached to the floor/wall in

accordance with the installation instructions.

Indoor use only.

The nameplate is located on the bottom

exterior of the main unit.

On power sources

• The unit is not disconnected from the mains

as long as it is connected to the AC outlet,

even if the unit itself has been turned off.

• As the main plug is used to disconnect the

unit from the mains, connect the unit to an

easily accessible AC outlet. Should you

notice an abnormality in the unit, disconnect

the main plug from the AC outlet

immediately.

For customers in India

Disposal of Old

Electrical & Electronic

Equipment (Applicable

in the European Union

and other European

countries with

separate collection

systems)

Copyrights and Trademarks

• This system incorporates with Dolby*

Digital and Dolby Pro Logic adaptive matrix

surround decoder and the DTS** Digital

Surround System.

* Manufactured under license from Dolby

Laboratories. Dolby, Pro Logic, and the

double-D symbol are trademarks of Dolby

Laboratories.

** For DTS patents, see

http://patents.dts.com. Manufactured

under license from DTS Licensing

Limited. DTS, DTS-HD, the Symbol, &

DTS and the Symbol together are

registered trademarks of DTS, Inc. © DTS,

• This system incorporates High-Definition

Multimedia Interface (HDMI

)

technology.

The terms HDMI and HDMI High-

Definition Multimedia Interface, and the

HDMI Logo are trademarks or registered

trademarks of HDMI Licensing LLC in the

United States and other countries.

• “BRAVIA” is a trademark of Sony

Corporation.

• “AVCHD/Progressive” and the “AVCHD/

Progressive” logo are trademarks of

Panasonic Corporation and Sony

Corporation.

• , “XMB”, and “xross media bar” are

trademarks of Sony Corporation and Sony

Computer Entertainment Inc.

• “PlayStation” is a registered trademark of

Sony Computer Entertainment Inc.

•Wi-Fi

, Wi-Fi Protected Access

and Wi-Fi

Alliance

are registered trademarks of Wi-Fi

Alliance.

• Wi-Fi CERTIFIED™, WPA™, WPA2™,

Wi-Fi Protected Setup™, Miracast™ and

Wi-Fi CERTIFIED Miracast™ are

trademarks of Wi-Fi Alliance.

• The N Mark is a trademark or registered

trademark of NFC Forum, Inc. in the United

States and in other countries.

• “Super Audio CD” is a trademark.

• Android™ is a trademark of Google Inc.

• Google Play™ is a trademark of Google Inc.

WARNING

• “Xperia” is a trademark of Sony Mobile

Communications AB.

•The Bluetooth

word mark and logos are

registered trademarks owned by Bluetooth

SIG, Inc. and any use of such marks by Sony

Corporation is under license. Other

trademarks and trade names are those of their

respective owners.

• MPEG Layer-3 audio coding technology and

patents licensed from Fraunhofer IIS and

Thomson.

• Windows Media is either a registered

trademark or trademark of Microsoft

Corporation in the United States and/or other

countries.

This product is protected by certain

intellectual property rights of Microsoft

Corporation. Use or distribution of such

technology outside of this product is

prohibited without a license from Microsoft

or an authorized Microsoft subsidiary.

Content owners use Microsoft PlayReady™

content access technology to protect their

intellectual property, including copyrighted

content. This device uses PlayReady

technology to access PlayReady-protected

content and/or WMDRM-protected content.

If the device fails to properly enforce

restrictions on content usage, content owners

may require Microsoft to revoke the device’s

ability to consume PlayReady-protected

content. Revocation should not affect

unprotected content or content protected by

other content access technologies. Content

owners may require you to upgrade

PlayReady to access their content. If you

decline an upgrade, you will not be able to

access content that requires the upgrade.

• All other trademarks are trademarks of their

respective owners.

• Other system and product names are

generally trademarks or registered

trademarks of the manufacturers. ™ and ®

marks are not indicated in this document.

END USER LICENSE

AGREEMENT

Read the following agreement carefully to

proceed.

END USER LICENCE AGREEMENT FOR

CERTAIN SOFTWARE AND SERVICE TO

BE USED WITH YOUR SONY PRODUCT

This End User Licence Agreement (“EULA”)

is a legal agreement between you and Sony

Corporation (“Sony”), the licensor of the

software (other than the software which is

governed by other licences as indicated below,

the “Excluded Software”) included in this

Sony Product and related materials which

shall be collectively referred to as the “Sony

Software.” This EULA covers the world-wide

market (except for the United States of

America, Canada, China and Japan) as a

territory, and also covers the Sony Software

and that of Sony’s third party licensors

(“Third Party Licensors”) and accompanying

printed or online documentation. The Sony

Software includes software in your Sony

Product, other software, including updates or

modified software, provided to you by Sony,

whether stored on media or downloaded to the

Sony Product via any method.

SOFTWARE LICENCE

You cannot use the Sony Software except as

specified herein. The Sony Software is

licensed, not sold. Sony and its Third Party

Licensors grant you a limited licence to use

the Sony Software only on the Sony Product.

The Sony Software may create data files

automatically for use with the Sony Software,

and you agree that any such data files are

deemed to be a part of the Sony Software. The

Sony Software is licensed as a single product,

and you may not separate its component parts

for use on more than one device unless

expressly authorized by Sony. You may not

use the Sony Software separately from the

Sony Product. Except as such prohibition is

restricted by the applicable law, you agree to

be prohibited from modifying, reverse

engineering, decompiling or disassembling

the Sony Software in whole or in part for any

purpose other than allowed under this EULA.

In addition, you may not rent, lease,

sublicense, or sell the Sony Software, but you

may transfer all of your rights under this

EULA only as part of a sale or transfer of the

Sony Product provided you retain no copies,

transfer all of the Sony Software (including all

copies, component parts, any media, printed

materials, all versions and any upgrades of the

Sony Software, and this EULA), and the

recipient agrees to the terms of this EULA.

Sony and its Third Party Licensors retain all

rights that this EULA does not expressly grant

to you. You shall not (a) bypass, modify,

defeat, or circumvent any of the functions or

protections of the Sony Software or any

mechanisms operatively linked to the Sony

Software; or (b) remove, alter, cover, or

deface any trademarks or notices on the Sony

Software. You understand, acknowledge, and

agree that the software, network services, or

other products other than the Sony Software

upon which the Sony Software’s performance

may depend might be interrupted or

discontinued at the discretion of the suppliers

(software suppliers, service providers, Third

Party Providers, etc.) or Sony.

SONY’S RIGHTS TO USER’S

MATERIAL

If you send any communications or materials

to Sony by electronic mail or otherwise

(“Materials”), including any selections,

comments, data, questions, suggestions, or the

like, all such Materials are, and will be treated

as, non-confidential and non-proprietary.

Thus, to the maximum extent as permitted

under the applicable law, you give up any

claim that use of such Materials violates any

of your rights including moral rights, privacy

rights, proprietary or other property rights,

rights of publicity, rights to credit for material

or ideas, or any other right, including the right

to approve the way Sony uses such Materials.

Any Material may be adapted, broadcast,

changed, copied, disclosed, licensed,

performed, posted, published, sold,

transmitted, or used by Sony anywhere in the

world, in any medium, for the period in which

the above-mentioned rights given up by you

exist and without attribution or compensation

to you. Furthermore, you hereby assign all

right, title, and interest in, and Sony is free to

use, without any compensation to you, any

ideas, know-how, concepts, techniques, or

other intellectual property rights contained in

the Materials, whether or not patentable, for

any purpose whatsoever, including but not

limited to developing, manufacturing, having

manufactured, licensing, marketing, and

selling products using such Materials.

However, you agree and understand that Sony

is not obligated to use any such ideas, know-

how, concepts, or techniques or Materials, and

you have no right to compel such use.

LIMITED WARRANTY ON

MEDIA

In situations where the Sony Software or any

part thereof is furnished on media, Sony

warrants that for a period of ninety (90) days

from the date of original purchase by you, the

media on which the Sony Software is

furnished to you will be free from defects in

materials and workmanship under normal use.

This limited warranty extends only to you as

the original licensee. Sony’s entire liability

and your exclusive remedy will be

replacement of the media not meeting Sony’s

limited warranty. ANY IMPLIED

WARRANTIES OR CONDITIONS ON THE

MEDIA, INCLUDING THE IMPLIED

WARRANTIES AND CONDITIONS OF

MERCHANTABILITY, TITLE, NON-

INFRINGEMENT, AND/OR FITNESS FOR

A PARTICULAR PURPOSE, ARE

LIMITED IN DURATION TO NINETY (90)

DAYS FROM THE DATE OF ORIGINAL

PURCHASE BY YOU. SOME

JURISDICTIONS DO NOT ALLOW

LIMITATIONS ON HOW LONG AN

IMPLIED WARRANTY OR CONDITION

LASTS, SO THESE LIMITATIONS MAY

NOT APPLY TO YOU. THIS WARRANTY

GIVES YOU SPECIFIC LEGAL RIGHTS,

AND YOU MAY ALSO HAVE OTHER

RIGHTS WHICH VARY FROM

JURISDICTION TO JURISDICTION.

INDEMNIFICATION

To the maximum extent as permitted under the

applicable law, you agree to indemnify,

defend, and hold harmless Sony and all of its

agents, directors, officers, employees,

information providers, licensors and

licensees, affiliates, content providers, and

direct and indirect parent(s) (collectively,

“Indemnified Parties”) from and against any

and all liability and costs (including, without

limitation, attorneys’ fees and costs) incurred

by the Indemnified Parties in connection with

any claim arising out of (i) any breach or

alleged breach by you of this EULA in any

manner, (ii) any information you submit to

Sony hereunder, (iii) any breach or alleged

breach by you of a third party’s rights, (iv) any

damage caused by or alleged to have been

caused by you to the Sony Software, the

Services, or the Content. To the maximum

extent as permitted under the applicable law,

counsel you select for defense or settlement of

a claim must be consented to by Sony and/or

Indemnified Party(s) prior to counsel being

engaged to represent you and Sony and/or

Indemnified Party(s). You and your counsel

will cooperate as fully as reasonably required

by the Indemnified Party(s) in defense or

settlement of any claim. Sony and/or

Indemnified Party(s) reserve the right, at its

own expense, to assume the exclusive defense

or settlement, and control of any matter

otherwise subject to indemnification by you.

You shall not in any event consent to any

judgment, settlement, attachment, or lien, or

any other act adverse to the interest of Sony or

any Indemnified Party without the prior

written consent of Sony and/or Indemnified

Party(s).

HIGH RISK ACTIVITIES

The Sony Software is not fault-tolerant and is

not designed, manufactured or intended for

use or resale as on-line control equipment in

hazardous environments requiring fail-safe

performance, such as in the operation of

nuclear facilities, aircraft navigation or

communication systems, air traffic control,

direct life support machines, or weapons

systems, in which the failure of the Sony

Software could lead to death, personal injury,

or severe physical or environmental damage

(“High Risk Activities”). SONY, EACH OF

THE THIRD PARTY LICENSORS, AND

EACH OF THEIR RESPECTIVE

AFFILIATES SPECIFICALLY DISCLAIM

ANY EXPRESS OR IMPLIED

WARRANTY OR CONDITION OF

FITNESS FOR HIGH RISK ACTIVITIES.

RESTRICTIONS ON EXPORT

OF ENCRYPTION

TECHNOLOGY

The Sony Software and the Content may

contain encryption technology. You

acknowledge that any export of Sony

Software or the Content containing encryption

technology from your residence or subsequent

re-export of such software by a person located

outside of your residence might require a

licence or other authorization from any

governmental authority. By accepting this

licence agreement, you agree to abide by all

relevant U.S. export laws and regulations in

the purchase and use of the Sony product

being acquired, including but not limited to

those regulations relating to the export control

of cryptographic items and not to transfer, or

authorize the transfer, of the Sony Software or

the Content to a prohibited country or

otherwise in violation of any such restrictions

or regulations.

JURY TRIAL WAIVER

EVEN IF TRIAL BY JURY MAY BE

ADOPTED UNDER THE APPLICABLE

LAW, THE PARTIES HERETO WAIVE

TRIAL BY JURY WITH RESPECT TO ANY

MATTERS ARISING UNDER OR

RELATING TO THIS EULA TO THE

MAXIMUM EXTENT AS PERMITTED

UNDER THE APPLICABLE LAW. Any

cause of action you may have with respect to

the Services must be commenced within one

(1) year after the claim or cause of action

arises to the maximum extent as permitted

under the applicable law. Some jurisdictions

do not allow limitations on the time for

commencement of actions (or prescribe a

longer period), so this limitation may not

apply to you.

ENTIRE AGREEMENT,

NOTICE, WAIVER,

SEVERABILITY AND

JURISDICTION

This EULA, the limited warranty

accompanying the Sony Product, Sony’s then-

current privacy policy, and any additional

terms and conditions posted on the Services,

together constitute the entire agreement

between you and Sony with respect to the

Sony Product, the Sony Software, the

Services, and the Content. Any notice by Sony

hereunder may be made by letter, e-mail, or

posting on the Services. The failure of Sony to

exercise or enforce any right or provision of

this EULA shall not constitute a waiver of

such right or provision. If any part of this

EULA is held invalid, illegal, or

unenforceable, that provision shall be

enforced to the maximum extent permissible

so as to maintain the intent of this EULA, and

the other parts will remain in full force and

effect. To the extent permissible by law, this

agreement shall be governed by and construed

in accordance with the laws of Japan.

EXCLUDED SOFTWARE

Excluded Software included in the Sony

Product is not subject to this EULA. Please

refer to the section of this booklet entitled

“NOTICES AND LICENCES FOR

SOFTWARE” for a list of the applicable

software and terms and conditions governing

the use of such Excluded Software.

Alternatively, if you do not have access to the

website page you can obtain a copy by writing

to Sony (the contact point of which is

described in the documents accompanying

with Sony Product).

TERM

This EULA is effective until terminated. Sony

may terminate this EULA immediately if you

fail to comply with its terms by giving you

notice. In such event, you must destroy the

Sony Software and accompanying

documentation, and all copies you have made

of them. In addition, upon termination you

will have no recourse against Sony, its

affiliates, its Third Party Licensors, or its

Third Party Providers for your inability to use

the Sony Software or the accompanying

documentation, the Services, or the Content.

About These Operating

Instructions

• The instructions in these Operating

Instructions describe the controls on the

remote control. You can also use the controls

on the unit if they have the same or similar

names as those on the remote control.

• Some illustrations are presented as

conceptual drawings, and may be different

from the actual products.

• The items displayed on the TV screen may

vary depending on the area.

• The default setting is underlined.

Table of Contents

About These Operating Instructions .... 6

Unpacking ............................................ 8

Guide to Parts and Controls ................. 9

Getting Started

Step 1: Installing the

Speakers .............................. 13

Step 2: Connecting the

System ................................. 16

Connecting the speakers ....... 16

Connecting the TV .................. 17

Connecting the other

equipment ........................... 18

Connecting the antenna

(aerial) ................................. 20

Step 3: Preparing for Network

Connection .......................... 20

Step 4: Performing the Easy

Setup .................................... 21

Step 5: Selecting the Playback

Source .................................. 22

Step 6: Enjoying Surround

Sound ................................... 22

Playback

Playing from a USB Device ............... 24

Enjoying Music from a BLUETOOTH

Device ......................................... 25

Using Screen mirroring ...................... 27

Connecting to a Remote Device by

One-touch Function (NFC) ......... 28

Available Options .............................. 30

Sound Adjustment

Enjoying Multiplex Broadcast

Sound .......................................... 32

Tuner

Listening to the Radio ........................ 33

Other Operations

Using the Control for HDMI Function

for “BRAVIA” Sync ................... 34

Setting the Speakers ........................... 35

Using the Sleep Timer ........................ 37

Changing the Brightness .................... 37

Saving Power in Standby Mode ......... 37

Settings and

Adjustments

Using the Setup Display ..................... 38

[Software Update] .............................. 38

[Screen Settings] ................................ 39

[Audio Settings] ................................. 40

[System Settings] ............................... 41

[External Input Settings] .................... 41

[Network Settings] ............................. 42

[Resetting] .......................................... 42

Additional Information

Precautions ......................................... 43

Troubleshooting ................................. 45

Playable Types of Files ...................... 50

Supported Audio Formats .................. 51

Specifications ..................................... 51

Index ................................................... 53

Unpacking

• Operating Instructions

• Remote control (1)

• R03 (size AAA) batteries (2)

• FM wire antenna (aerial) (1)

• High Speed HDMI cable (1)

• Front speakers (2)

• Surround speakers (2)

• Center speaker (1)

• Subwoofer (1)

• Speaker cords (4, red/white/gray/blue)

• Foot pads (1)

Guide to Parts and Controls

For more information, refer to the pages indicated in parentheses.

A "/1 (on/standby)

Turns on the main unit, or sets it to

standby mode.

B (N-Mark) (page 28)

Position the NFC-compatible device

near this indication to activate the NFC

function.

C Front panel display

D Soft-touch buttons

• These buttons work when you touch them

lightly. Do not press on them with

excessive force.

• If the button does not work, release the

button and wait for a few seconds. Then,

touch the button again with your finger

covering the button indicator.

• The LED indicator flashes in white when

you activate the buttons.

FUNCTION* (page 22)

Selects the playback source.

VOL +/–

* Hold down FUNCTION on the main unit

for more than 2 seconds, the built-in sound

demonstration will be played back on the

system. If a USB device is connected, the

audio content from the USB will be played

back as sound demonstration. Press x to

stop the demonstration.

During the demonstration, the volume

level may be higher than the volume level

you have set.

E (USB) port (page 24)

F (remote control sensor)

G LED indicator

White: Lights up when the main unit is

turned on.

Blue (for BLUETOOTH status):

– System is ready for pairing: Flashes

quickly

– When pairing: Flashes quickly

– NFC device is detected: Flashes

– Connection is established: Lights up

Front panel

Notes

Note

* High-bandwidth Digital Content Protection

** When you press DISPLAY, the stream information/decoding status is displayed when the function is

set to “TV” or “COAX”. The stream information/decoding status may not appear depending on the

stream or item being decoded.

A SPEAKERS jacks (page 16)

B DIGITAL AUDIO IN (TV OPTICAL)

jack (pages 17, 18)

(COAXIAL) jack (page 17)

C AUDIO IN (L/R) jacks (pages 17,

18)

D ANTENNA (FM) terminal

(page 20)

E HDMI (OUT) jack (page 17)

F HDMI IN (HDMI 1/HDMI 2) jacks

(page 18)

Indicators in the front panel display

Rear panel

Muting is on

BLUETOOTH power

is on

The HDMI (OUT)

jack is correctly

connected to an

HDCP* compliant

equipment with

HDMI input

Repeat play

Stereo sound

is received

(Radio only)

The system’s status

(radio frequency, etc.)**

• 2 +, AUDIO, and N buttons have a

tactile dot. Use the tactile dot as a

reference when operating the remote

control.

The system automatically returns to

standby mode

If any button on the main unit or remote

control is not pressed within 20 minutes,

the system automatically returns to standby

mode.

A TV "/1 (on/standby)

Turns on the TV or sets it to standby

mode.

TV t (TV input)

Switches the TV’s input source

between the TV and other input

sources.

"/1 (on/standby) (pages 21)

Turns on the system or sets it to

standby mode.

B SPEAKERS TVyAUDIO

Selects whether TV sound is output

from the system’s speakers or the TV’s

speaker(s). This function works only

when you set [Control for HDMI] to

[On] (page 41).

DISPLAY (page 25)

Displays playback information on the

TV screen.

Displays the preset radio station,

frequency, etc., in the front panel

display.

DIMMER

Adjusts the brightness of the front

panel display and the LED indicator.

SLEEP (page 37)

Sets the sleep timer.

C Input buttons

Selects the equipment you want to use.

HDMI 1, HDMI 2, TV, TUNER, USB

D FUNCTION (page 22)

Selects the playback source.

By setting [Input Skip Setting]

(page 41), you can skip unused inputs

when selecting a function.

E Sound field buttons

See “Step 6: Enjoying Surround

Sound” (page 22)

CLEARAUDIO+, MUSIC, MOVIE,

FOOTBALL, MUSIC ARENA,

SOUND FIELD

F Color buttons

Displays an operation guide on the TV

screen when the color buttons are

available. Follow the operation guide

to perform a selected operation.

Remote control

G MIRRORING (pages 27, 29)

Selects the “SCR M” function.

BLUETOOTH (page 26)

Selects the “BT” function.

OPTIONS (pages 23, 30)

Displays the options menu on the TV

screen or in the front panel display.

(The location differs depending on the

selected function.)

RETURN

Returns to the previous display.

B/V/v/b

Moves the highlight to a displayed

item.

(enter)

Enters the selected item.

H HOME (pages 35, 38)

Enters or exits the system’s home

menu.

2 (volume) +/–

Adjusts the volume.

AUDIO (page 32)

Selects the audio format/track.

(muting)

Turns off the sound temporarily.

2 (volume) +/–

Adjusts the TV volume.

J Playback operation buttons

See “Playback” (page 24).

m/M (fast/slow/freeze frame)

Fast reverse/fast forward during

playback. Each time you press the

button, the search speed changes.

Activates slow-motion play when

pressed for more than one second in

pause mode.

Plays one frame at a time when pressed

in pause mode.

./> (previous/next)

Selects the previous/next chapter,

track, or file.

N (play)

Starts or re-starts playback (resume

play).

X (pause)

Pauses or re-starts playback.

x (stop)

Stops playback and remembers the

stop point (resume point). The resume

point for a title/track is the last point

you played or the last photo for a photo

folder.

Stops the built-in or USB sound

demonstration.

Radio operation buttons

See “Tuner” (page 33).

PRESET +/–

TUNING +/–

Getting Started

Step 1: Installing the

Speakers

Install the speakers by referring to the

illustration below.

A Front left speaker (L)

B Front right speaker (R)

C Center speaker

D Surround left speaker (L)

E Surround right speaker (R)

F Subwoofer

G TV

Installing the surround

speakers in rear position

(Speaker layout: [Standard])

Installing all speakers in

front position

(Speaker layout: [All Front])

• Be sure to select the speakers layout setting

(page 35) according to your speakers

placement.

• Use caution when placing the speakers and/or

speaker stands attached to the speakers on a

specially treated (waxed, oiled, polished, etc.)

floor, as staining or discoloration may result.

• Do not lean or hang on a speaker, as it may fall

down.

• The speakers of this system are not magnetically

shielded. This may result in color irregularity

when they are placed near a CRT TV or

projector.

In order to output more effective sound when [All

Front] setting is selected, we recommend you to

install your front speakers and surround speakers

closer to each other.

Getting Started

Example of speaker

system configuration

Notes

Tip

Getting Started

Speakers can be placed on a flat surface or

installed on walls (page 14). You may

position the speakers at different angles to

achieve optimum sound quality.

Before you install the front speakers, center

speaker and surround speakers, be sure to

attach the supplied foot pads as shown in

the illustration below. This prevents

vibration or movement and reduce

scratches.

You can attach the foot pads on either side of the

two mirrored surface.

You can install your speakers on the wall.

1 Prepare screws (not supplied)

that are suitable for the hook on

the back of each speaker. See

the illustrations below.

2 Fasten the screws to the wall,

then hang the speaker on the

screws.

Example of multi angle

speaker configuration

Installing the speakers

on a flat surface

Note

3 mm

Installing the speakers

on the wall

4 mm (3/16 in)

more than 25 mm (1 in)

Getting Started

For fixed angle speaker intallation For multi angle speaker installation

6 mm to 8 mm

The screw should protrude 6mm to 8 mm

5 mm

10 mm

Hook on the rear of the front and surround

speakers

5 mm

10 mm

Hook on the rear of the center speaker

4 mm to 5 mm

The screw should protrude 4 mm to 5 mm

5 mm

10 mm

Horizontal speaker installation

5 mm

Vertical speaker installation

Getting Started

• You may install your speaker at different angles

to achieve optimum sound quality (page 14).

• Use screws that are suitable for the wall material

and strength. As a plaster board wall is

especially fragile, attach the screws securely to

a beam and fasten them to the wall. Install the

speakers on a vertical and flat wall where

reinforcement is applied.

• Contact a screw shop or installer regarding the

wall material or screws to be used.

• Sony is not responsible for accident or damage

caused by improper installation, insufficient

wall strength or improper screw installation,

natural calamity, etc.

Step 2: Connecting the

System

Do not connect the AC power cord (mains

lead) of the main unit to a wall outlet

(mains) until all the other connections are

made.

When you connect other equipment with a

volume control, turn down the volume of the

equipment to a level where sound is not distorted.

Connect the speaker cords to match the

color of the SPEAKERS jacks of the main

unit. Be sure to insert the speaker connector

until it clicks.

Be sure to connect the speaker cords to the front

and surround speakers.

Notes

Note

Connecting the

speakers

Note

Gray

(Surround right

speaker (R))

Purple

(Subwoofer)

White

(Front left

speaker (L))

Red

(Front right

speaker (R))

Green

(Center

speaker)

Blue

(Surround left

speaker (L))

Getting Started

Select one of the following connection methods according to the input jacks on your TV.

Video connection

High Speed HDMI cable

The Audio Return Channel (ARC) function enables the TV to output sound through the system with

an HDMI connection, without performing connection B or C. To set the ARC function on this

system, see [Audio Return Channel] (page 41). To check the compatibility of your TV’s ARC

function, refer to the operating instructions supplied with your TV.

Audio connections

If your TV’s HDMI jack is not compatible with the ARC function, make an appropriate

audio connection (B or C) for listening to TV sound via the system’s speakers.

Connecting the TV

HDMI cable

(supplied)

B High quality

Standard quality

Optical digital cord

(not supplied)

OPTICAL

DIGITAL OUT

AUDIO

OUTPUT

Audio cable (not supplied)

Getting Started

To enjoy TV sound, select “TV” function for connection B or “AUDIO” function for connection C.

Connect the system, TV and other equipment as follows. You cannot enjoy the audio and

video of the connected equipment on the TV through this system when the system is off or

in standby mode.

* This connection is unnecessary for connection A (HDMI connection)

Select one of the following connection methods according to the jack type of the equipment.

Note

Connecting the other equipment

System

Signal flow

: Audio signal

: Video signal

Equipment

(Set-top box, VCR, PlayStation

or digital satellite receiver, etc.)

Video out*

Getting Started

When you make connection A

This connection can transmit both video and audio signals.

• Video signals from the HDMI IN (1/2) jacks are output to the HDMI OUT jack only when the

“HDMI1” or “HDMI2” function is selected.

• To output an audio signal from the HDMI IN (1/2) jacks to the HDMI OUT jack, you may need to

change the audio output setting. For details, see [Audio Output] in [Audio Settings] (page 40).

When you make connection B, C, D

Connect the system so that video signals from the system and other equipment are output

to the TV, and audio signals from the equipment are output to the system.

• If you make either connection above, set [Control for HDMI] in [HDMI Settings] of [System Settings]

to [Off] (page 41).

• You can enjoy equipment sound by selecting “TV” function for connection B, “COAX” function for

connection C or “AUDIO” function for connection D.

A High quality

Standard

quality

Notes

HDMI cable

* (not supplied)

* High Speed HDMI cable

OPTICAL

DIGITAL OUT

AUDIO

OUTPUT

HDMI OUT

OUT

AUDIO COAXIAL

Optical digital cord

(not supplied)

Coaxial digital cord

(not supplied)

Audio cable (not supplied)

Getting Started

• Be sure to fully extend the FM wire antenna

(aerial).

• After connecting the FM wire antenna (aerial),

keep it as horizontal as possible.

Step 3: Preparing for

Network Connection

The system has built-in Wi-Fi, and you can

connect the system to the network by

making the network settings.

Before performing the

network settings

When your wireless LAN router (access

point) is Wi-Fi Protected Setup (WPS)-

compatible, you can easily set the network

settings with the WPS button.

If not, check the following information in

advance, and record it in the space provided

below.

• The network name (SSID*) that

identifies your network.**

• If security is set on your wireless

network, the security key (WEP key,

WPA key).**

* SSID (Service Set Identifier) is a name that

identifies a particular wireless network.

** You need to check the settings of your wireless

LAN router to get the information about SSID

and security key. For details:

– visit the following website:

http://www.sony-asia.com/section/support

– refer to the operating instructions supplied

with the wireless LAN router

– consult the manufacturer of the wireless

LAN router

About wireless LAN

security

Since communication via the wireless LAN

function is established by radio waves, the

wireless signal may be susceptible to

interception. To protect wireless

communication, this system supports

various security functions. Be sure to

correctly configure the security settings in

accordance with your network

environment.

x No Security

Although you can easily make settings,

anyone can intercept wireless

communication or intrude into your

wireless network, even without any

sophisticated tools. Keep in mind that there

is a risk of unauthorized access or

interception of data.

x WEP

WEP applies security to communications

to prevent outsiders from intercepting

communications or intruding into your

wireless network. WEP is a legacy security

technology that enables older devices

which do not support TKIP/AES to be

connected.

Connecting the antenna

(aerial)

Notes

FM wire antenna (aerial)

(supplied)

Page is loading ...

Sony HT-IV300 Operating instructions

Sony HT-IV300 Operating instructions

Sony HT-IV300 Operating instructions

Related papers

Other documents