MULTIPLEX 16CH User manual

User

’

s Manual

MPEG4 DVR SERIES_V0.989

Please read instructions thoroughly before operation and retain it for future reference.

150

16CH / 8CH / 4CH

4CH

16CH / 8CH / 4CH Built

-

in DVD

-

RW Writer or CD

-

RW Writer

IMPORTANT SAFEGUARD

Note: Any changes of AP, please refer to your distributor.

Note: Any changes of this manual made to the actual product are subjects to no further notification.

Note: Version: 1042-09-H6-04-AA-08 ; 0030

The lightning flash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of uninsulated

“dangerous voltage” within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

This exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature accompanying

the appliance.

CE Mark

This apparatus is manufactured to comply with the radio interference

requirements.

CAUTION:

To reduce the risk of electric shock, do not expose this apparatus to rain or moisture.

Only operate this apparatus from the type of power source indicated on the label.

CAUTION

RISK OF ELECTRIC SHOCK

THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR

THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN

COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD (“MPEG-4 VIDEO”) AND/OR (ii) DECODING

MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-

COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY

MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR

ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL

INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC.

SEE HTTP://WWW.MPEGLA.COM

.

TABLE OF CONTENTS

PARTS AND FEATURES

1.1 FEATURES -------------------------------------------------------------------------------------------------------------------------

1.2 PACKAGE CONTENTS ---------------------------------------------------------------------------------------------------------

1.3 SPECIFICATION ------------------------------------------------------------------------------------------------------------------

1.4 FRONT PANEL --------------------------------------------------------------------------------------------------------------------

1.5 REAR PANEL ----------------------------------------------------------------------------------------------------------------------

GETTING STARTED

2.1 GETTING STARTED -------------------------------------------------------------------------------------------------------------

BASIC OPERATION

3.1 RECORDING -----------------------------------------------------------------------------------------------------------------------

3.2 PLAYBACK -------------------------------------------------------------------------------------------------------------------------

DETAILED MENU CONFIGURATION

4.1 MENU TREE ----------------------------------------------------------------------------------------------------------------------

4.2 MAIN MENU OPTIONS_ RECORD -----------------------------------------------------------------------------------------

4.3 MAIN MENU OPTIONS_ TIMER --------------------------------------------------------------------------------------------

4.4 MAIN MENU OPTIONS_ DATE ---------------------------------------------------------------------------------------------

4.5 MAIN MENU OPTIONS_ ADVANCE ---------------------------------------------------------------------------------------

4.6 ADVANCE MENU_ CAMERA ------------------------------------------------------------------------------------------------

4.7 ADVANCE MENU_ DETECTION -------------------------------------------------------------------------------------------

4.8 ADVANCE MENU_ DISPLAY ------------------------------------------------------------------------------------------------

4.9 ADVANCE MENU_ ALERT -----------------------------------------------------------------------------------------------------

4.10 ADVANCE MENU_ REMOTE ------------------------------------------------------------------------------------------------

4.11 ADVANCE MENU_ SYSTEM -------------------------------------------------------------------------------------------------

4.12 ADVANCE MENU_ NETWORK ---------------------------------------------------------------------------------------------

4.13 ADVANCE MENU_ BACKUP ------------------------------------------------------------------------------------------------

4.14 ADVANCE MENU_ HDD INFO ----------------------------------------------------------------------------------------------

4.15 ADVANCE MENU_ EVENT LOG -------------------------------------------------------------------------------------------

ADDITIONAL OPERATION

5.1 SEARCH -----------------------------------------------------------------------------------------------------------------------------

5.2 2X DIGITAL ZOOM ---------------------------------------------------------------------------------------------------------------

5.3 KEY LOCK --------------------------------------------------------------------------------------------------------------------------

5.4 SWITCH THE N/P SYSTEM ----------------------------------------------------------------------------------------------------

5.5 USB UPGRADE--------------------------------------------------------------------------------------------------------------------

5.6 LICENSED SOFTWARE AP----------------------------------------------------------------------------------------------------

AP BASIC OPERATION ---------------------------------------------------------------------------------------------------

AP ADVANCED SETTING -------------------------------------------------------------------------------------------------

Network ------------------------------------------------------------------------------------------------------------

DDNS ----------------------------------------------------------------------------------------------------------------

MAIL -----------------------------------------------------------------------------------------------------------------

FTP ------------------------------------------------------------------------------------------------------------------

DVR-CAMERA SETTING --------------------------------------------------------------------------------------

DEVICE -------------------------------------------------------------------------------------------------------------

DETECTION -------------------------------------------------------------------------------------------------------

NETWORK BACKUP & PLAYBACK -----------------------------------------------------------------------

ALARM -------------------------------------------------------------------------------------------------------------

ALARM LIST ------------------------------------------------------------------------------------------------------

GENERAL ---------------------------------------------------------------------------------------------------------

ACCOUNT ---------------------------------------------------------------------------------------------------------

ONLINE USER INFO --------------------------------------------------------------------------------------------

FILE PATH ---------------------------------------------------------------------------------------------------------

5.7 CONNECT TO AP VIA IE BROWSER ---------------------------------------------------------------------------------------

5.8 GPRS ---------------------------------------------------------------------------------------------------------------------------------

5.9 OPTIONAL PHERIPHERALS --------------------------------------------------------------------------------------------------

TROUBLE SHOOTING

6.1 FAQ -----------------------------------------------------------------------------------------------------------------------------------

APPENDIX #1

INSTALL THE HDD -----------------------------------------------------------------------------------------------------------

APPENDIX #2

PIN CONFIGURATION -------------------------------------------------------------------------------------------------------

APPENDIX #

3

RS232 PROTOCOL ----------------------------------------------------------------------------------------------------------

APPENDIX #

3

RECORDING TIME TABLE -------------------------------------------------------------------------------------------------

APPENDIX #

4

COMPATIBLE USB BRAND ------------------------------------------------------------------------------------------------

APPENDIX #

5

COMPATIBLE HDD BRAND ------------------------------------------------------------------------------------------------

1

2

4

8

10

11

12

14

15

16

17

18

19

21

22

23

24

25

26

28

29

30

31

32

37

38

39

40

41

42

43

44

45

46

47

49

51

53

54

55

56

48

PARTS AND FEATURES

1.1 FEATURES

1.2 PACKAGE CONTENTS

1

NOTE: Please check the package contents to make sure that you receive all accessories shown above.

MPEG4 DVR Technology

Compression format provides crystal clear image with real time performance

Multiplex

Allows live display, record, playback, backup, and network all at the same time

Long

-

Recording Hours:

500GB can record more than 4 days. (16CH, Frame Best Quality, 120IPS)

Connect to Independent Disk Array (optional) to have more storage capacity

Backup Function:

Backup files with USB interface, DVD-WRITER or CD-WRITER and network remote recording & backup

Remote Surveillance:

GPRS allows viewing and controlling of the system &

also support remote surveillance with licensed software AP and IE browser

Web surveillance supports 5 users simultaneously

Intelligent Motion Trigger Recording:

With advanced motion detection function, scheduled motion detection recording

(4 different adjustable factors for motion detection sensitivity) and convenient search function,

customized security environment is achieved

Alarm trigger recording will send alert with images to designated e-mail and FTP address

Supports pre-alarm recording (8MB)

Covert Recording:

A mask replaces the live image with a blank screen & the monitor shows nothing but recording is still on

A/V Support:

Supports 4 audio-in, 2 audio-out to record sounds

Supports VGA output to monitor (optional)

General:

Support multi-language OSD

System auto recovery after power reconnected

IR remote control of the system and PTZ through RS-485

Support daylight saving function

Support manual / timer / motion / alarm / remote recording functions

Watermark function ensures authentication of recorded images

Support TCP/IP, PPPoE, DHCP and DDNS network connection

Digital Video Recorder

Screws

DSUB PIN Connector

Power and Data Bus

OptionalIR Transmitter and IR Receiver

Licensed Software AP

Adapter

16CH / 8CH / 4CH

DVD-RW / CD-RW

4CH8CH16CHMODEL

1.3 SPECIFICATION

8 inputs, 1 output 4 inputs, 1 output

YesVideo Loss Detection

Programmable with adjustable dwell time (2, 4, 8, 16 sec.)Dwell Time (Sequential Channel Switch)

Support PELCO-D protocolPTZ control

Remote control DVR and PTZ via IR transmitter (RS-485) (4CH: Optional)IR transmitter

TCP/IP, PPPoE, DHCP and DDNSNetwork Protocol

E-mail images, and images uploading to FTP site’s specific accountRemote Alarm Notification

Support GPRS to access the system via mobile phone (require J2ME, MIDP2.0 protocol)Mobile Surveillance

10/100 Base-T. Support remote control and live view via EthernetEthernet

Support licensed software AP, and IE browserWeb Interface

front panel * 1front panel * 1, back panel * 1USB Interface

Motion JPEGWeb Transmitting Compression Format

16 inputs, 1 outputAlarm I/O

YesKey Lock

Support 2X digital zoom functionPicture Zoom

240 IPS for NTSC

200 IPS for PAL

120 IPS for NTSC

100 IPS for PAL

8CH: support HDD * 2

8CH (D): support HDD *1

4CH: support HDD * 1

4CH (D): support HDD *1

240, 120, 60, 30 IPS <NTSC>

200, 100, 50, 25 IPS <PAL>

120, 60, 30, 15 IPS <NTSC>

100, 50, 25, 12 IPS <PAL>

60, 30, 15, 7 IPS <NTSC>

50, 25, 12, 6 IPS <PAL>

30, 15, 7, 3 IPS <NTSC>

25, 12, 6, 3 IPS <PAL>

480, 240, 120, 60 IPS <NTSC>

400, 200, 100, 50 IPS <PAL>

Adjustable Recording Speed (CIF)

352 240 pixels with 240 IPS NTSC

352 288 pixels with 200 IPS PAL

352 240 pixels with 120 IPS NTSC

352 288 pixels with 100 IPS PAL

720 480 pixels with 60 IPS NTSC

720 576 pixels with 50 IPS PAL

352 240 pixels with 480 IPS NTSC

352 288 pixels with 400 IPS PAL

Maximum Recording Rate (CIF)

720 480 pixels with 30 IPS NTSC

720 576 pixels with 25 IPS PAL

8 Channels 4 Channels

8CH / 8CH (D) 4CH / 4CH (D)

NTSC / PAL (switch able) Video System

Backup Device

Pre-alarm Recording

Motion Detect Sensitivity

Motion Detection Area

Audio I/O

Multiplex Operation

Refresh Rate

Watermark

Recording Mode

HDD Quick Cleaning

Hard Disk Storage

(IDE type, ATA66) (over 400GB)

Image Quality Setting

Adjustable Recording Speed (Frame)

Maximum Recording Rate (Frame)

Video Output

Video Loop Out

(Composite video signal 1 Vp-p 75 BNC)

Video Input

(Composite video signal 1 Vp-p 75 BNC)

Video Compression Format

MODEL

USB1.1 / 2.0 backup and network remote backup

Yes (8 MB)

Manual Timer Motion Alarm

4 adjustable variables with precise calculation for motion detection

16 12 grids per camera for all channels

4 audio inputs, 2 audio outputs (Mono)

480 IPS for NTSC

400 IPS for PAL

16CH: support HDD * 2

16CH (D): support HDD *1

Best, High, Normal, and Basic

120, 60, 30, 15 IPS <NTSC>

100, 50, 25, 12 IPS <PAL>

live display, record, playback, backup, and network

Yes

Quick clean up the “index system” of the recorded files. 250GB under 2 seconds

720 480 pixels with 120 IPS NTSC

720 576 pixels with 100 IPS PAL

Main Monitor Output:

Composite video signal 1 Vp-p 75 BNC

Call Monitor Output:

Composite video signal 1 Vp-p 75 BNC

16 Channels

MPEG 4

16CH / 16CH (D)

2

 Any changes made to the actual product are subjects to no further notification.

Independent Disk Array ; VGA

Connector ; IR Remote Control

432mm (W) 90mm (H) 326mm

(D)

4CH: 42 W ; 4CH (D): 64 W

432mm (W) 90mm (H) 326mm (D)

Dimensions (mm)

64 WPower Consumption

8CH / 8CH (D) 4CH / 4CH (D)

Specification Continued …

Optional Peripherals

System Recovery

Operating Temperature

Power Source

Daylight Saving

Date Display Format

Video Adjustable

Camera Title

MODEL

Independent Disk Array ; VGA Connector

System auto recovery after power reconnected

10 ~ 40 (50 ~104 )

DC 19V

Yes

YY/MM/DD, DD/MM/YY, MM/DD/YY, and Off

Hue Color Contrast Brightness

Support up to 6 letters

16CH / 16CH (D)

3

1.4 FRONT PANEL

4

1) POWER:

Press “POWER” button to turn on/ turn off the DVR.

(Under recording mode, please stop record before turn off the DVR)

2) MENU:

Press “MENU” button to enter main menu.

3) ENTER / RECORD:

Press “ENTER” button to confirm.

Press “RECORD” to activate the manual recording.

4) “ ““ ”:

Press “ “or “ ” button to change the setting in the menu / to select the channel.

Press “ “and “ ” buttons to open / close the DVD / CD WRITER.

5) USB:

Support firmware update and files backup.

6) LED LIGHT:

POWER: Power on

STANDBY: Standby

HDD: HDD is reading or recording

HDD Full: HDD is full.

ALARM: Once the alarm is triggered

TIMER: When timer recording is turned on.

REC: Under recording status

PLAY: Under playing status

7) MODE :

Press “MODE ” button to switch channel display mode.

16CH / 8CH

16CH (D) / 8CH (D) / 4CH (D)

5

8) “ ” :

Press “ ” button to pause the play back files.

9) “ ” :

Press “ ” button to stop the play back files.

10) “ “ :

Under playback mode, press “ ” button to fast rewind.

11) “ “ :

Under playback mode, press “ ” to fast forward.

12) “ZOOM” :

Press “ZOOM” button to enlarge the picture of selected channel (2X digital zoom).

13) “PLAY” :

Press “PLAY” button to playback recorded files.

14) “ ◄►“:

Press “ ◄►” to move the cursor up / down / left / right.

15) “SHIFT”+ “SEQ”:

Press “SHIFT” + “SEQ”to activate the call monitor function and press “SEQ” to escape

the call monitor mode.

16) “SHIFT” + “AUDIO“ :

Press “SHIFT” + “AUDIO“ to select live or playback sounds of the 4 audio channels.

17) “SHIFT” + “SLOW“ :

Under playback mode, press “SHIFT” + “SLOW“ to show slow playback.

18) “SHIFT” + “CH “or “CH ”:

Press “SHIFT” + “CH “ or “CH ” change the setting in the menu / to select the

channel.

19) “SHIFT” + “SET” :

Press “SHIFT” + “SET” to change channel display position.

Press “ ◄►” to select the channel which You would like to change,

Press “ ”or “ ” select the channel which You would like to show.

Press “ENTER” button to confirm.

20) “SHIFT” + “SEARCH” :

Press “SHIFT” + “SEARCH” buttons to enter the search mode.

21) “ ” + “ ” :

Press “ ” + “ ” buttons at the same time to enter / exit the PTZ control mode.

1.4 FRONT PANEL

Continued

…

6

1) “HDD Cartridge Lock”:

Lock / Unlock the cartridge of the HDD.

2) “USB”:

Support firmware update and files backup.

3) “LED LIGHT”:

HDD: HDD is reading or recording

HDD Full: HDD is full.

ALARM: Once the alarm is triggered

TIMER: When timer recording is turned on

PLAY: Under playing status

REC: Under recording status

4) “MENU”:

Press “MENU” button to enter main menu.

5) “ENTER”/ “SET”:

Press “ENTER” button to confirm.

Press “SET” to change channel display position.

Press “ ◄►“ to select the channel which you like to change,

Press “ ”or “ ” select the channel which You would like to show.

Press “ENTER” button to confirm.

6) “SEARCH ”:

Press “SEARCH” button to enter the search mode.

7) “SLOW ”:

Under playback mode, press “SLOW“ button to show slow playback.

4CH

7

7) “ZOOM ”:

Press “ZOOM” button to enlarge the picture of selected channel (2X digital zoom).

8) “ ” / “ ”:

Press “ “ button to show the 4 channel display mode.

Press “ ” button to change the setting in the menu.

9) “SEQ”/ “ ”:

Press “SEQ” button to activate the call monitor function and press “SEQ” button

again to escape the call monitor mode.

Press “ ” button to change the setting in the menu.

10) “POWER”:

Press this button to turn on / turn off the DVR.

(Under recording mode, please stop record before turn off the DVR).

11) “CH1 ”“CH2 ”“CH3 ”“CH4 ”:

Press “1 ”“2 ”“3 ”“4 ” buttons to select the channel.

12) “REC”:

Press “REC” button to activate the manual recording.

13) “PLAY”:

Press “PLAY” button to playback the recorded files.

14) “UP / PAUSE , DOWN / STOP, LEFT / FAST REWIND, RIGHT / FAST FORWARD“:

Press “ ◄►“ to move the cursor up / down / left / right.

Under playback mode, press “ “ button to pause playback.

Under playback mode, press “ “ button to stop playback.

Under playback mode, press “ “ button to fast rewind.

Under playback mode, press “ “ button to fast forward.

15) “ ” :

Press these two buttons to select live or playback sounds of the 4 audio channels.

16) “ ” :

Press these two buttons at the same time to enter / exit the PTZ control mode.

1.5 REAR PANEL

8

DISK ARRAY

INPUT

LOOP

1 2 10 11 12

LA N

16

AC T.

LINK

13 14 155

EXTERNAL I/O

6 7 8 9

HI-IMPEDA NCE

75 ?

USB

D / V

9

IR

1

HI-IMPEDA NCE

RS 485

75? 8

43

CALL

DC19V

24

MONITOR

16

1 3

15

17

13

12

1

2

4

5

6 7

8

10

11

9

14

16

3

16CH / 16CH (D)

DC 19V

INPUT

DISKARRAY

LOOP

RS 485

INPUT

IR

INPUT INPUT

EXTERNAL I/O

USB

INPUT

LOOP

3

LOOP LOOP LOOP

INPUT

D/V

LAN

INPUT

ACT.

LINK

INPUT

CALL

LOOP LOOP LOOP

MONITOR

31

24

15

16

17

14

1

2

3

4

5

6 7

8

10

9

11

12 13

8CH / 8CH (D)

INPUT

2

LOOP

DC 19V

LOOP LOOP

3

INPUT

4

INPUT

ACT.

LAN

2

LINK

CALLMONITOR

IN

1

4

3

OUT

INPUT

D

/

V

1

HI-IMPEDANCE

4

75?

1

LOOP

EXTERNAL I/O

DISK ARRAY

IR

16

6

2 1

4

7 8

10

179

15

14

11

12 13

4CH / 4CH (D) ~ But size are different

9

1) DISK ARRAY PORT:

Connect to disk array for extend HDD capacity.

2) IR:

Connect to IR receiver.

3) RS485:

Connect to external device (such as PTZ camera) with RS485-A and RS485-B.

4) EXTERNAL I/O PORT:

Connect to external device. Control external device or get controlled remotely by

external device (alarm input, external alarm, PTZ camera).

5) USB PORT:

Support firmware update and files backup.

6) D/V PORT (Digital Video Port):

Connect to VGA connector card.

7) LAN:

Connect to Internet by LAN cable.

8) LINK / ACT LED light:

When the Internet is activated, the LED light will be on.

9) CALL MONITOR:

Connect to CALL monitor. Show the channel switch display. When the alarm is

triggered, the call monitor will show the image of the triggered channel for a period of

time.

10) POWER:

Connect to provided adapter.

11) FAN:

For ventilation.

12) VIDEO INPUT (CHANNEL 1 – 16 / CHANNEL 1 – 8 / CHANNEL 1 – 4) :

Connect to video source, such as camera.

13) LOOP (CHANNEL 1 – 16 / CHANNEL 1 – 8 / CHANNEL 1 – 4) :

Video output.

14) 75 / HI:

When using Loop function, please switch to HI. When you don’t use Loop function,

please switch to 75 .

15) MONITOR:

Connect to Main monitor.

16) AUDIO IN (1-4):

Connect to audio source, such as camera which equipped with audio function.

When users start the recording function, the audio input will be recorded .

17) AUDIO OUT :

Connect to monitor or speaker.

With 2 mono audio outputs from the same source.

1234

2: RS485B

3: RS485A

2.1 GETTING STARTED

GETTING STARTED

10

NOTE:

Please refer to Appendix #1 for HDD installation

instructions.

NOTE:

Please refer to “Section 1.5 Rear Panel”

for connection.

NOTE:

Please refer to Appendix#2 for pin configurations

of the external I/O port .

Connecting all the devices to construct a surveillance.

1) Install HDD:

The HDD must be installed

before the DVR is turned on.

2) Connect cameras.

3) Connect monitors.

4) Connect the external devices.

5) Connect the AC power cord to power adapter and plug into an electrical outlet.

The standby LED would be on as red.

Press the “POWER” button. The power LED will be on as red.

It takes approximately 10 to 15 seconds to boot the system.

Channel Title

Available Capacity of

Internal HDDs

System Time

Under HDD Overwrite

Mode

Take 16CH as an example

BASIC OPERATION

11

3.1 RECORDING

The DVR offers three recording modes, manual record, event recording, and timer

record. If power is off accidentally, recorded video files will still be stored in the HDDs.

DVR will return to original recording status after power is on again.

1) MANUAL RECORDING (continuous recording) :

Recording is initiated by manually pressing the “REC” button.

Indicated by the sign “ ”

2) EVENT RECORDING (triggered by motion and external alarm) :

When this functions is activated,

the recording is triggered by motion or external alarm.

Indicated by the sign “ ” and “ ” .

3) TIMER RECORDING (scheduled time) :

Recording is scheduled by Timer. Indicated by the sign “TIMER RECORD”.

Under

Recording

NOTE :

When the HDDs are full under O/W

recording mode, previous recorded

files may be overwritten without

further warning notices.

Take 16CH as an example

Press “ PLAY ” button, the DVR will display the last recording video.

1) FAST FORWARD (F.F. ) & FAST REWIND (REW):

You can increase speed for fast forward and rewind on the DVR.

In the playback mode,

Press ” ” once to get 4X speed forward and press twice to get 8X speed,…

and the maximum speed can reach 32X.

Press ” ” once to get 4X speed rewind and press twice to get 8X speed, …

and the maximum speed can reach 32X.

The type of recording image size (Frame or CIF )will also shown on the screen.

2) PAUSE / IMAGE JOG:

Press “ ” button to pause the current image displayed on the screen.

In the Pause mode,

Press ” ” once to get forward by frame change.

Press ” ” once to get rewind by frame change.

3) STOP:

Press “ ” button under all circumstance, it will return DVR to live monitoring mode.

4) CHANNEL SHIFT:

Display mode:

Press MODE “ ” button to select display mode.

Full Screen Switch:

Press “ ”or “ ” button to show the full screen channels.

Channel display switch:

Press “ ” + “ ”button.

Press “ ”“ ”“

◄”“►” to select the channel which You would like to change.

Press “ ”or “ ” select the channel which You would like show.

Press “ENTER” button to confirm.

5) SLOW PLAYBACK:

Press “ ” + “ ” button to get 1/4X speed playback and press twice to

get 1/8X speed.

6) AUDIO:

Press “ ” + “ “to select live or playback sounds of the 4 audio

channels.

AUDIO 1 (L) ; AUDIO 1 (P)

AUDIO 2 (L) ; AUDIO 2 (P)

AUDIO 3 (L) ; AUDIO 3 (P)

AUDIO 4 (L) ; AUDIO 4 (P)

3.2 PLAYBACK

12

Note:

For the playback of the DVD or CD backup file, please refer to “Section 4.13 ADVANCE

MENU_BACKUP” for detailed instruction

16CH / 8CH

16CH (D) / 8CH (D) / 4CH (D)

13

Press “ PLAY ” button, the DVR will display the last recording video.

1) FAST FORWARD (F.F. ) & FAST REWIND (REW):

You can increase speed for fast forward and rewind on the DVR.

In the playback mode,

Press “ “ once to get 4X speed forward and press twice to get 8X speed,

… and the maximum speed can reach 32X.

Press “ “ once to get 4X speed rewind and press twice to get 8X speed,

… and the maximum speed can reach 32X.

The type of recording image size (Frame or CIF )will also shown on the screen.

2) PAUSE / IMAGE JOG:

Press “ “ button to pause the current image displayed on the screen.

In the Pause mode,

Press “ “ once to get forward by frame change.

Press “ “ once to get rewind by frame change.

3) STOP:

Press “ “ button under all circumstance, it will return DVR to live monitoring mode.

4) CHANNEL SHIFT:

Display mode:

Press MODE “ ” button to 4 channels display.

Full Screen Switch:

Press “ ”or “ ” button to show the full screen channels.

Channel display switch:

Press “SET” to change channel display position.

Press “ ◄►“ to select the channel which you like to change,

Press “ ”or “ ” select the channel which You would like show.

Press “ENTER” button to confirm.

5) SLOW PLAYBACK:

Press “SLOW” button to get 1/4X speed playback and press twice to get 1/8X.

6) AUDIO:

Press “ ” to select live or playback sounds of the 4 audio channels.

AUDIO 1 (L) ; AUDIO 1 (P)

AUDIO 2 (L) ; AUDIO 2 (P)

AUDIO 3 (L) ; AUDIO 3 (P)

AUDIO 4 (L) ; AUDIO 4 (P)

4CH

DETAILED MENU CONFIGURATION

4.1 MENU TREE

14

DATE:

YEAR MONTH DAY

FORMAT: Y

-

M

-

D

…

TIME:

HOUR MIN SEC

MENU

RECORD

TIMER

DATE

ADVANCE

TITLE

BRIG

CONT

SATU

HUE

COV

REC

CAMERA

DISPLAY

REMOTE

NETWORK

MANUAL RECORD

ENABLE

EVENT RECORD

ENABLE

TIMER RECORD

ENABLE

OVERWRITE

RECORD IMG SIZE

RECORD QUALITY

MANUAL RECORD

IPS

EVENT RECORD

IPS

TIMER RECORD

IPS

TOTAL IPS SHARE

DATE

START

HH : MM

END

HH : MM

ALERT

BACKUP

EVENT LOG

HDD INFO

TITLE DISPLAY

DATE DISPLAY

HDD INFO

LOSS SCREEN

PLAYBACK

INFO

DWELL

DURATION

(SEC)

DE

-

INTERLACE

EXT. ALERT

INT. BUZZER

KEY BUZZER

VLOSS BUZZER

MOTION BUZZER

ALARM BUZZER

ALARM DURATION

(SEC)

HDD BUZZER

HDD NEARLY FULL

(GB)

SYSTEM

SERIAL TYPE

BAUD RATE

HOST ID

IR

PASSWORD

RESET DEFAULT

CLEAR HDD

UPGRADE

VERSION

VIDEO FORMAT

LANGUAGE

AUTO KEYLOCK

WATERMARK

PRE

-

ALARM

DAYLIGHT SAVING

TITLE

DET

AREA

LS

SS

TS

RE

ALARM

DETECTION

TITLE

DEVICE

ID

PROTOCOL

RATE

MONITOR

OUT

DETECTION

TIMER

4.2 MAIN MENU OPTIONS___RECORD

15

Move the cursor to the “RECORD”, and press ”ENTER”, then the screen will show the

following options.

1) MANUAL RECORD ENABLE:

Start / Stop the manual recording function.

2) EVENT RECORD ENABLE:

Start / Stop the event recording function. When this functions is activated, the

recording will triggered by motion or external alarm

3) TIMER RECORD ENABLE

:

Start / Stop the timer recording function.

4) OVERWRITE:

Select to overwrite previous recording video in HDD. When the HDD is full under O/W

recording mode, previous recorded files will be overwritten without further warning

notices.

5) RECORD IMG SIZE:

There are two recording options: FRAME & CIF. When change record image size, user

need to stop recording first.

6) RECORD QUALITY:

There are four quality settings: BEST, HIGH, NORMAL & BASIC

In the following (7) ~ (9) sections is for 16 channels.

For 8 channels, divided the IPS by 2. For 4 channels, divided the IPS by 4.

7) MANUAL RECORD IPS:

Recording is activated by pressing the “REC” button. Select the images per second of

MANUAL RECORD, The options are as the followings:

NTSC

NTSC: FRAME: 120, 60, 30, 15

PAL

PAL: FRAME: 100, 50, 25, 12

CIF: 480, 240, 120, 60 CIF: 400, 200, 100, 50

(MENU)

►

RECORD

TIMER

DATE

ADVANCE

Press “MENU” button to enter the main menu list. The default admin password is 0000.

Enter the default password and press “ENTER”. (Users could alter the password later, please

refer to “Section 4.11 ADVANCE MENU_SYSTEM”

)

Use the following buttons for menu setting:

“ ◄► “ to move the cursor.

“ , ” to choose the numbers / selections.

“ ENTER “ to go to the submenu / to confirm the selection

“ MENU “ to go to the menu OSD

/ to confirm the change / to exit the menu OSD

RECORD

MANUAL RECORD ENABLE

EVENT RECORD ENABLE

TIMER RECORD ENABLE

OVERWRITE

RECORD IMG SIZE

RECORD QUALITY

MANUAL RECORD IPS

EVENT RECORD IPS

TIMER RECORD IPS

TOTAL IPS SHARE

16

8) EVENT RECORD IPS:

Recording is activated by event (alarm and motion trigger). Select the images

per second for event record, The options are as the followings:

NTSC

NTSC: FRAME: 120, 60, 30, 15

PAL

PAL: FRAME: 100, 50, 25, 12

CIF: 480, 240, 120, 60 CIF: 400, 200, 100, 50

9) TIMER RECORD IPS:

Recording is activated by timer schedule. Select the images per second of

TIMER RECORD, The options are as the followings:

NTSC

NTSC: FRAME: 120, 60, 30, 15

PAL

PAL: FRAME: 100, 50, 25, 12

CIF: 480, 240, 120, 60 CIF: 400, 200, 100, 50

10) TOTAL IPS SHARE:

There are two IPS settings: (Take 16ch as example)

FIX

FIX: IPS per channel = RECORD IPS 16 channels

GROUP

GROUP: Every 4 channels will form a group.

IPS per channel = RECORD IPS 4 number

of channels under recording within the group.

Ex.: If you set the record IPS as 480 IPS, then

Channel 01 will get 30 IPS (120 / 4 / 1 = 30)

Channel 05 and 06 each will get 15 IPS (120 / 4 / 2 = 15)

“ “ means under recording

4.3 MAIN MENU OPTIONS___TIMER

Move the cursor to the “TIMER”, and press ”ENTER”, then the screen will show the

following options.

RECORD

DATE START END

OFF 00 : 00 - 00 : 00

DAILY 08 : 00 - 18 : 00

SUN 06 : 00 - 23 : 00

MON-FRI 00 : 00 - 00 : 00

OFF 00 : 00 - 00 : 00

0605

01

Group 1 :

CH 01 ~ 04

Group 2 :

CH 05 ~ 08

Group 3 :

CH 09 ~ 12

Group 4 :

CH 13 ~ 16

NOTE:

NOTE: When users choose the image size as “CIF”, the total

IPS share will be fixed. That is IPS per channel will equal to

record IPS divided by 16 channels.

(MENU)

RECORD

►

TIMER

DATE

ADVANCE

17

4.4 MAIN MENU OPTIONS___DATE

(MENU)

RECORD

TIMER

►

DATE

ADVANCE

Move the cursor to the “DATE”, and press ”ENTER”, then the screen will show the

following options.

NOTE: The illustrated setting means: During the daylight saving time period (start from the 4

th

Sunday of March,

end on the 4

th

Sunday of October), the DVR system time will plus one hour.

1) DATE:

A scheduled record date (SUN/MON/TUE/ WED/ THU/ FRI/ SAT/ MON–FRI / SAT-

SUN / DAILY/OFF) could be set to activate the timer recording.

NOTE 1 : Specific date could be changed by “ ”or “ ” button.

NOTE 2 : If you plan to set the timer recording across the midnight, there are two

ways for setting the timer recording schedule, please following the instructions below.

Example 1 :

If you only want to set recording timer schedule from every Sunday 23:30

to Monday 23:30, then you could set recording timer schedule as Sunday from 23:30

to 23:30.

Example 2 :

If you plan to set the timer recording from Sunday 08:00 to Monday

15:00, then you could set the recording timer schedule as Sunday from 08 : 00 to 00 :

00, and Monday 00 : 00 to 15 : 00.

2) START:

Select the start time for the recording.

3) END:

Select the finishing time for the recording.

DATE

DATE 2005-NOV-08 13:55:22

FORMAT Y-M-D

DAYLIGHT SAVING ON

1) DATE:

Set the correct time of the DVR ( YEAR / MONTH / DAY / HOUR / MIN / SEC)

2) FORMAT:

There are three date formats: Y-M-D, M-D-Y, D-M-Y.

3) DAYLIGHT SAVING:

Specify whether to use daylight saving time and time period. ( START / END)

Daylight saving time can be adjusted manually.

Enter the daylight saving menu mode to set start time, end time and adjust

hour of the daylight saving.

DAYLIGHT SAVING

START 4TH-SUN-MAR 01: 00: 00

END 4TH-SUN-OCT 01: 00: 00

ADJUST 01 : 00

Page is loading ...

MULTIPLEX 16CH User manual

MULTIPLEX 16CH User manual

Related papers

Other documents