Unbranded FPKIT Operating instructions

Lightweight Fire Pit Kit Assembly

Installation Step 1

Choose a clear, flat area - 42" x 42" - free of overhanging branches and other flammable

material. Check with local building codes to determine how close to building structures you are allowed to

install your new Fire Pit Kit with Screen Cover.

Step 2

Form the first row, setting each block end to end to form a circle. No need to measure,

each block fits with the next to form the circle automatically.

Step 3

Place the second layer of block on top of the first layer, making sure to alternate the

seams so that they don't line up. This will give the block wall some strength and give the Fire Pit that

"Stacked Stone" look that is visually appealing.

Final Step

After repeating Step 3 to place the 3rd row of block, check the Fire Pit for gaps and

spaces. When you are satisfied with the look of the Fire Pit, place the Fire Pit Bowl in place on top of the 3rd

row of block. Follow this with the Charcoal Grate and then the Screen Cover. Your Fire Pit Kit is ready to

use!