CAMPANIA T-1001 Assembly Instructions

Brand
CAMPANIA
Model
T-1001
Type
Assembly Instructions
T-1001 Palladio Table
Assembly Instructions
rev 5/5/2020
Table Information:
• 43" Diam. x 30"H
• 551 lbs
Tools Required:
Level
Screwdriver
Components List
Image Item Description Component
Item # Quantity
Support Flange FLANGE 1
Palladio Table - TOP
ONLY
(Dims:
43"Diam. x 2.5"H
227 lbs)
T-001A 1
Palladio Table -
BASE ONLY
(Dims:
15"L x 15"W x
227"H
250 lbs)
T-001B 1
Palladio Table - Cap
No Hole
T-001CAP
NO HOLE 1
Palladio Table - Cap
With Hole
T-001CAP
W/HOLE 1
Proudly
MADE IN USA
Shown in Greystone (GS) with Palladio Benches BE-27
Step 1 - Position the base (T-001B) where the table is to be
installed, ensuring that it is level.
Step 2 - Carefully place the tabletop (T-001A) onto the base
(T-001B). Be sure to center the standpipe from the
base in the center hole of the tabletop.
Step 3 - Screw the metal ange
(FLANGE) onto the standpipe.
3a - The ange does not
screw all the way
own into the recess
on the tabletop.
Step 4 - Place the cap with hole T-001CAP W/HOLE) or no
hole (T-001CAP NO HOLE) over the ange.
4a - The cap with hole
(T-001CAP W/HOLE)
should be used if you
plan to use an umbrella
with the table.
  • Page 1 1

CAMPANIA T-1001 Assembly Instructions

Brand
CAMPANIA
Model
T-1001
Type
Assembly Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents