2. Sunricher
  3. SR-2202N-1-10V

Sunricher SR-2202N-1-10V User manual

  • Hello! I've reviewed the user manual for the Sunricher Wall Mounted Controller 09.2202N110V.04050. This document details how to control single color LED lighting using its rotary knob for dimming and on/off control. It also outlines key specifications like the 1-10V output signal and compatibility with various mounting frames. I am ready to assist you with any questions you may have about this device.
  • What is the power supply for this controller?
    What is the operating temperature range?
    How do I adjust the light intensity?
    How to switch the light ON/OFF?
1-10V Single Color Wall Mounted Controller 09.2202N110V.04050
59.00 mm
N
1-10V Dimmer
LGND1
1-10V OUTPUT AC INPUT
Function introduction
Important: Read All Instructions Prior to Installation
Front side
Rotate the knob counterclockwise
to decrease light intensity from
100% to 1%.
Rotate the knob clockwise to
increase light intensity
from 1% to 100%
Click the rotary knob
to switch ON/OFF light
Back side
31.20 mm
59.00 mm
AC Power input1 channel 1-10V output
Output Signal 1x(1-10V)
Power Supply 100-240V AC
Power consumption 200 mA
Operating temperature 0-40°C
Relative humidity 8% to 80%
Dimensions 80x80x52.3mm
Product Data
• DO NOT install with power applied to device.
• DO NOT expose the device to moisture.
Safety & Warnings
• Rotation sensitive
•
• 1 channel 1-10V Signal output
• Control single color
• Waterproof grade: IP20
• 0-10V version for chosen
Standard design, The key part of this controller is a
universal, extremely rotary standard switch element that
can be integrated in numerous frames by different
manufactures
Wiring diagram
AC Power
50/60Hz
12V/24V/36V
CV PSU
L
N
G
V+
V-
OUTPUT
INPUT
V+ V+
V- V-
1-10V
1-10V LED Dimmer
N
1-10V Dimmer
LGND1
1-1 0V OUTP UT AC IN PUT
AC 100-240V Power
50/60Hz
AC Power
50/60Hz
12V/24V/36V
CV PSU
L
N
G
V+
V-
OUTPUT
INPUT
V+ V+
V- V-
1-10V
1-10V LED Dimmer
Installation
The key part of this controller is a universal, extremely rotary standard switch element that can be integrated in
numerous frames by different manufactures as below list:
BEKER S1, B1, B3, B7 glass
GIRA Standard55, E2, Event, Esprit
JUNG A500, Aplus
MERTEN M-smart, M-Arc, M-Plan
/