2. Soyal
  3. 701ServerSQL

Soyal 701ServerSQL Quick start guide

  • Hello! I've reviewed the SOYAL 701ServerSQL Quick Guide and I'm ready to answer your questions. This document covers how to set up your access controllers, focusing on wiring methods, network configurations, and connection status. It also details how to configure control panels.
  • How do I set up the control panel for AR-716-E18?
    How do I set up the control panel for AR-716-E16?
    What does it mean if the controller status indicator is green?
    What does it mean if the controller status indicator is red?
701ServerSQL Quick Guide
STEP 1.
STEP 2.
COM - Select your wiring method
Select your wiring method Enable Event Polling Polling Interval
USB
AR-321-CM
RJ45
RS485
Device
PC
or
AR-727-CM
Device
RS485
Device
TCP/IP
LAN - configuration of devices access point
STEP 3. LINE – Connection Status
STEP 4. Control Panel Setting
701ServerSQL
A C D
E F B
Node ID setting
TCP/IP configuration
Port Setting
Net-Point Name
Selecting Controllers Type
Node Range
A
A
A
B
C
D
E
F
C
C
D
D
B
B
Through this page, you can monitor and see the real-time connection
status for control panel and controller.
means online; Hardware wiring and configuration setting is correct.
means offline; Either hardware wiring or configuration setting is
incorrect. (Please check the wiring by checking the manual again
and check the configuration setting mentioned above)
Control Panel setting for AR-716-E18 is set through [7. 716E]
AR-716-E16 is set through [721E]
If controller is online, you configure site plan via 701 Client Software.
more detail
Copyright SOYAL Technology
Default Login Name: supervisor
Default Password: supervisor
/