Canon imageFORMULA DR-1210C Owner's manual

Brand: Canon

Model: imageFORMULA DR-1210C

Type: Owner's manual

Canon imageFORMULA DR-1210C is a high-speed duplex scanner that can handle a variety of document types and sizes. With a scanning speed of up to 20 ppm and a 50-sheet ADF, it's perfect for quickly and easily digitizing large batches of documents. The DR-1210C also features a number of advanced features, such as double-feed detection, blank page removal, and automatic image enhancement, which make it ideal for use in a variety of business applications.

*CE-IE-489*

Turn ON your computer.

Warning

Do not connect the scanner to the

computer before installing the software.

If you connect the scanner and turn it

ON before you install the software, the

wizard screen on the right will appear.

If this wizard is displayed, click the

[Cancel] button to exit the screen, and

turn the scanner OFF.

Insert the DR-1210C Setup Disc

into the PC’s CD-ROM drive.

The setup wizard automatically starts

up when you insert the CD-ROM into

the CD-ROM drive. If the setup

wizard does not start up, execute

setup.exe in the CD-ROM.

Click [Typical Installation].

If you click [Typical Installation], all of

the software is installed. If you want

to select which parts of the software

to install, click [Custom Installation].

Click [Install].

All of the currently displayed

software is installed. To install only

selected software, click [Back] and

select [Custom Installation].

Click [Next].

Document Scanner DR-1210C

Peel off the orange tape on the operation panel and press the lock

switch to (Unlock) position.

Lock Switch

Unlock

Lock

Peel off the tape holding the center of the document feed tray and

then remove all of the tape (indicated by

▼

Peel off the orange tape fastening the document feed tray (

) and

open the document feed tray.

Open the feeder cover (

), and move the paper release lever in

the direction indicated by the arrow on the lever (

Remove the protective sheet.

Return the paper release lever to its original position (

), and

gently close the feeder cover until it clicks into place (

Carefully close the document feed tray.

Open the feeder and remove the protective sheet (indicated by

▼

Thank you for purchasing the Canon DR-1210C Document Scanner. This Easy

Start Guide describes the procedure for setting up the scanner for use. Follow

the procedures outlined in this Easy Start Guide to set up the scanner. Details on

using the scanner are described in the User's Guide packaged with the scanner.

Before you use the scanner, make sure to thoroughly read the User's Guide.

Step 1. Checking the Packing List

When you unpack your scanner, make sure that it contains all of the following

accessories. If any of the items listed below are missing or damaged, contact

your local authorized Canon dealer or service representative.

Easy Start Guide

Step 3. Installing the Software

Install the software before connecting the scanner to the computer.

Warning

❏

Be sure to log on with administrator privileges when logging on to Windows.

❏ Close all other applications before installing the software.

Easy Start Guide

PUB. CE-IE-489

DR-1210C scanner

USB cable

AC adapter

Easy Start Guide

(this document)

User's Guide

DR-1210C

Setup Disc

Adobe Acrobat

Setup Disc

Warranty Card

(U.S.A. and Canada only)

Registration Card

(U.S.A. and Canada only)

Note

● The DR-1210C Setup Disc contains the “DR-1210C Scanner Driver”,

“CapturePerfect 3.0”, and “OmniPage SE 4”, made by Nuance Communications Inc.,

and “Presto! BizCard 5 SE”, made by NewSoft Technology Corp.

☞

User's Guide p.17 “About the Setup Disc”

● Items included in this package are subject to change without notice.

● You must keep the machine’s packaging and packing materials for storing or

transporting the machine.

Step 2.

Removing the Packing Materials

and Removing the Transport

Locks

Remove the scanner from the box, take it out of the plastic bag and release the

lock switch on the bottom of the unit. Remove the orange tape and protective

sheets from the scanner.

Document

Feed Tray

Paper Release Lever

Carefully close the feeder.

CAUTION

● Close the feeder gently to avoid catching your fingers, as this

may result in personal injury.

● Do not use excessive force when closing the feeder, as this may

damage or break the glass, and may result in personal injury.

Feeder Cover

■ Trademarks

• Canon and the Canon logo are registered trademarks of Canon Inc. in the United States and may also

be trademarks or registered trademarks in other countries.

• Microsoft Windows

is a registered trademark of Microsoft USA in the United States and other countries.

• Other brands and product names used in this manual may be trademarks or registered trademarks of

their respective companies.

Document Scanner DR-1210C

Wizard screen (Windows 2000)

☞

Continued on back side

Read the software license

agreement, and click [Yes] if you

consent to the conditions of the

software.

Installation of the scanner driver

starts.

After the scanner driver is installed,

installation of the job tools starts.

Click [Finish] to complete the

installation.

10.

Next the installation wizard for

CapturePerfect 3.0 appears.

11.

Click [Next].

12.

Read the software license

agreement, and click [Yes] if you

consent to the conditions of the

software.

13.

Check the destination folder and

click [Next].

14.

Installation of CapturePerfect 3.0

starts.

15.

Click [Finish] to complete the

installation of CapturePerfect 3.0.

16.

Next, installation of OmniPage SE 4

and Presto! BizCard 5 SE starts.

Follow the messages on the screen

to proceed with the installation.

17.

This completes the installation.

18.

Click [Exit] to exit the installer.

Click [Back] to return to the menu

screen.

3. The Hardware Installation screen

is displayed. The “This driver

has not passed the Windows

Logo Test” message is

displayed. Click [Continue

Anyway] to continue the

installation.

4. When the Completing the Found

New Hardware Wizard screen

appears, click [Finish] to finish

installation.

Step 4.

Connecting the Scanner to Your PC

Perform the following steps to connect the power cord and USB cable, and

connect the scanner to your PC.

Warning

❏ Use only the AC adapter included in the package.

❏ Connect the DR-1210C to your computer while the DR-1210C is turned OFF.

❏ Be sure to log on with administrator privileges when logging on to Windows.

☞

Continued from front side

Check that the ADF (Automatic Document Feeder) connector, located

in the center of the back side of the scanner, is fully inserted.

Plug the AC adapter into the connector located to the right of the

ADF connector (

Remove the protective cap from the power plug and insert it into a

power outlet (

Connect the USB cable to the scanner and the computer (

To PC

Check the scanner and computer connections, and press the

power button to turn the scanner ON.

When the scanner is turned ON, the power indicator lights, and

the display panel shows “Ready”.

Windows recognizes the Canon DR-1210C USB as a new device.

The driver is installed by the following procedure depending on the

version of Windows you are using.

● If the OS is Windows 2000,

installation starts, and the “Digital

Signature Not Found” message is

displayed. Clicking [Yes] resumes

installation of the driver, and

installation ends automatically.

● If the OS is Windows XP, the “Found

New Hardware Wizard” is displayed.

1. On the Windows Update search

screen, select [No, not this time],

and click [Next]. (This screen is

not displayed for Windows XP

service pack 1.)

2. Select [Install the software

automatically (Recommended)]

and click [Next].

Display Panel

Step 5. Scanning

When you have finished installing the software and the scanner has been

recognized, you can scan a document. Perform the following steps to test that

your document is scanned properly.

Thoroughly fan the pages of your

documents.

Place your original into the feeder, and

adjust the document guide adapter to

fit the size of your documents.

Press [FILE].

Scanning starts, and “Scanning” is

displayed on the display panel.

Scanning···

When “Sending complete” is

displayed on the display panel,

this indicates the scanning has

ended.

Sending complete.

Note

● Image files scanned by pressing [FILE] are saved in the [My

Pictures] folder in [My Documents]. (Default)

● Image files are saved according to the default settings as PDF

files with a 17-digit file name. This file name indicates the date

and time that the image was saved.

● Images scanned by pressing [COPY] are printed out on the

printer set as the default printer in Windows.

● Pressing [E-MAIL] starts up the e-mail software, and attaches

the scanned image file to a new message.

● You can change the scan settings by using the Job Registration

Tool registered in the [Programs] menu.

[FILE] button

Document Guide

Adapter

Display Panel

Power

Indicator

Power

Button

This setup is now complete

● This completes setup of the DR-1210C. Details on how to use the

DR-1210C are described in the User's Guide packaged with the

DR-1210C. Before you start using the Scanner, be sure to thoroughly

read the User's Guide.

● For details on how to use CapturePerfect 3.0, refer to the

“CapturePerfect Operation Guide” or the online Help included on

the CD-ROM.

Important!

When the icon changes as

shown above, this indicates that

a communications error has

occurred with the computer.

Check the scanner and

computer connections.

Canon imageFORMULA DR-1210C Owner's manual

Canon imageFORMULA DR-1210C Owner's manual

Canon imageFORMULA DR-1210C Owner's manual

Related papers