Alden HOTBIRD 13E Short Manual

Type
Short Manual

Alden HOTBIRD 13E

The Alden HOTBIRD 13E is a device that allows you to adjust transponder settings on your satellite dish. This can be useful if you need to change the settings for a particular satellite or if you are having trouble receiving a signal.

The HOTBIRD 13E is easy to use. Simply follow the steps in the instruction manual to change the settings. The device has a green status LED that will light up when it is turned on.

The HOTBIRD 13E is a versatile device that can be used for a variety of purposes. It can be used to:

  • Change the settings for a particular satellite
  • Troubleshoot problems with your satellite signal

Alden HOTBIRD 13E

The Alden HOTBIRD 13E is a device that allows you to adjust transponder settings on your satellite dish. This can be useful if you need to change the settings for a particular satellite or if you are having trouble receiving a signal.

The HOTBIRD 13E is easy to use. Simply follow the steps in the instruction manual to change the settings. The device has a green status LED that will light up when it is turned on.

The HOTBIRD 13E is a versatile device that can be used for a variety of purposes. It can be used to:

  • Change the settings for a particular satellite
  • Troubleshoot problems with your satellite signal
[email protected] • www.alden-deutschland.com
HOTBIRD 13E
Adjust Transponder Settings
state 06 / 2020
SHORT MANUAL
SATELLITE
Transp. No: 1
Sat: Hotbird 13
Adjust Transponder Settings
Step 1
Use key to switch on the S.S.C.®, so that the green status LED lights up
Step 2
Press key , the menu is displayed
Step 3
Conrm with button position 1 Transp. mod“
Step 4
Conrm with button for example Transp. No. 1“
„frequency“ is displayed
Step 5
Press button AND button once at the same time
first digit of the frequency will be flashing
Change the marked digit up with button
Jump to the next digit with button
Set the value with button / button
to „11900“ Mhz.
1. Transp. mod
2. Ext. boot
1. Transp. mod
2. Ext. boot
SATELLITE
Freq: 11355
Sat: Hotbird 13E
SATELLITE
Freq: 11355
Sat: Hotbird 13E
Adjust Transponder Settings
Step 6
As the frequency is set right, conrm by pressing button
for example „S/R: 29900 KS/s“ is displayed
Change the marked digit up with button
Jump to the next digit with button
Set the value with button / button
to „29900“ KS/s.
Step 7
As the symbol rate is set right, conrm by pressing button
for example „Pol: V“ is displayed
Change the value with button
/ button to „H“
Step 8
Press button to conrm
for example „Fec: 5/6“ is displayed
Change the value with button
/ button to
„3/4“ .
Step 9
Press button to conrm
for example „Mod: DVB-S1“ is displayed
Change the value with button
/ button to
„DVB-S2“ .
SATELLITE
S/R: 29900KS/s
Sat: Hotbird 13E
SATELLITE
Pol: V
Sat: Hotbird 13E
SATELLITE
Fec: 5/6
Sat: Hotbird 13E
SATELLITE
Mod.: DVB-S1
Sat: Hotbird 13E
www.alden-deutschland.com
ALDEN Deutschland GmbH • Fehrenkamp 12 • 49434 Neuenkirchen-Vörden
Telefon 05493 - 913660 • Telefax 05493 - 913663 • [email protected]
Step 10
Press button to conrm
display will switch o
Step 11
Press button
The green LED will switch o
Step 12
Start the antenna as usual
Adjust Transponder Settings
Info:
Please note that after the adjustmend the antenna can take more time to nd the satellite as
usual. Depending on the age and model of antenna it can take up to 15 minutes.
Attention:
While the antenna is searching, do not cancel the searchmode!
If the antenna will not get „Hotbird 13E“, the antenna will close by her own!
SATELLITE
SATELLITE
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Alden HOTBIRD 13E Short Manual

Type
Short Manual

Alden HOTBIRD 13E

The Alden HOTBIRD 13E is a device that allows you to adjust transponder settings on your satellite dish. This can be useful if you need to change the settings for a particular satellite or if you are having trouble receiving a signal.

The HOTBIRD 13E is easy to use. Simply follow the steps in the instruction manual to change the settings. The device has a green status LED that will light up when it is turned on.

The HOTBIRD 13E is a versatile device that can be used for a variety of purposes. It can be used to:

  • Change the settings for a particular satellite
  • Troubleshoot problems with your satellite signal

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI