• With Button 2 you are able to change the marked Position.
• With Button 3 you will jump to the next Positon oft the Number.
Adjust the Frequenz with the Button 2 / Button 3
into 11934 Mhz.
Step5
2 3
Info: Now the rst Position of the Frequenz (Freq) is ashing.
Step 6
When you have adjust the Frequency correct, confirm with
Button 4.
Press Button 2 und Button3 once at the same Time
Info: Now you will see the Symbol rate. For example “S/R: 27500 KS/s“.
• With Button 2 you are able to change the marked Position.
• With Button 3 you will jump to the next Positon oft the Number.
Adjust the Symbol rate with the Button 2 / Button 3 into 27500 KS/s.