ASUS TV Tuner
2
NOTE: Smart install wizard installs all
the driver and utilities for your TV tuner
card and synchronizes the TV country
settings with your OS.
3. Installing the EHD3-100 TV Tuner Card
IMPORTANT:
• Install the EHD3-100 TV Tuner Card into your computer before installing
the driver and utilities from the bundled support CD.
• If you have previously installed another TV tuner card in your computer,
uninstall the software and the card before installing the EHD3-100.
To install the EHD3-100 TV Tuner Card into your computer:
1. Turn off your computer and unplug it from the power source.
2. Remove the system cover.
3. Remove the bracket opposite the PCIe slot that you intend to use. Keep the
screw for later use.
4. Alignthecardconnectorwiththeslotandpressrmlyuntilthecardis
completely seated on the slot.
5. Secure the card to the chassis with the screw you removed earlier.
6. Replace the system cover.
4. Installing the EHD3-100 driver and utilities
4.1 Installing the driver and utilities automatically
To install the driver and utilities automatically:
1. Turn on your computer.
2. Windows
®
automatically detects the TV
tuner card and displays the Found New
Hardware Wizard window. Click Cancel.
3. Place the support CD into the optical drive.
An autorun screen appears if Autorun is
enabled on your computer.
4. Select Windows XP/Vista, then click
Smart install wizard. Follow the onscreen
instructions to complete the installation.
EHD3-100 TV Tuner Card Quick Start Guide