Silvercrest WIRELESS SOCKET SET Operation and Safety Notes

Brand: Silvercrest

Model: WIRELESS SOCKET SET

Type: Operation and Safety Notes

This manual is also suitable for

284705

WIRELESS SOCKET SET

FUNKSTECKDOSEN-SET

Bedienungs- und Sicherheitshinweise

IAN 284705

WIRELESS SOCKET SET

Operation and Safety Notes

FJERNBETJENTE

STIKKONTAKTER

Brugs- og sikkerhedsanvisninger

GB Operation and Safety Notes Page 5

DK Brugs- og sikkerhedsanvisninger Side 15

DE Bedienungs- und Sicherheitshinweise Seite 25

Before reading, unfold the page containing the illustrations and familiarise yourself

with all functions of the device.

Før du læser, vend siden med billeder frem og bliv bekendt med alle apparatets

funktioner.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich

anschließend mit allen Funktionen des Gerätes vertraut.

Master

ON OFF

5 GB

Table of contents

Legend of pictograms used.......................................................Page 6

Introduction ............................................................................................Page 6

Proper handling ............................................................................................Page 6

Scope of supply ...........................................................................................Page 6

Control elements ..........................................................................................Page 6

Technical data ..............................................................................................Page 7

Safety

Safety advice ................................................................................................Page 7

Safety instructions for batteries / rechargeable batteries ..........................Page 8

Setting up

Preparing the remote control .......................................................................Page 9

Setting up the remote- controlled socket .....................................................Page 9

Setting-up operation

Using the radio-controlled socket ................................................................Page 10

Using the remote- control .............................................................................Page 11

Trouble-shooting ...........................................................................................Page 11

Cleaning ....................................................................................................Page 12

Disposal ..................................................................................................... Page 12

Guarantee and service

Guarantee ....................................................................................................Page 12

Service address ............................................................................................Page 12

Declaration of conformity ............................................................................Page 13

Manufacturer ................................................................................................Page 13

6 GB

Legend of pictograms used / Introduction

Wireless Socket Set



Introduction



Proper handling

The radio-controlled socket set is suitable

for switching electrical equipment on and

oﬀ by remote control. Any alterations to

this device are not in accordance with

regulations and could represent signiﬁ-

cant risk of accidents. The manufacturer

does not accept liability for any damage

caused through the device not being used

in accordance with the regulations. This

device is not intended for commercial use.



Scope of supply

After you have unpacked this set, please

check to make sure all the contents are

complete.

4 Remote controlled sockets

1 4-channel remote control

1 Button cell CR 2032, lithium 3 V

(for remote control)

1 Set of operating instructions



Control elements

Remote control (fig. A):

Power indicator light

Channel ON / OFF button Channel

A, B, C, D

Master ON / OFF switch

Battery compartment lid

Legend of pictograms used

Volt (AC voltage) Caution! Fire hazard!

Hertz (frequency)

Do not dispose of electric

appliances in household

rubbish!

Watt (eﬀective power)

Improper battery disposal

harms the environment!

Observe warnings and

safety instructions!

Micro-switch with contact

opening < 3 mm

Beware of electric shock!

Danger to life!

EU-compliant

7 GB

Introduction

Remote-controlled socket (fig. B):

LED power indicator

Child protection socket



Technical data

Wireless Socket Set

RC DP3 4001-A DK 3726

Remote control

RCT DS1 CR-A 3726:

Batteries:

CR 2032, lithium 3 V

Frequency band: 433.05 MHz -

434.79 MHz

Radio frequency: 433.92 MHz

Max. transmitting

power: 5 dBm

Licensing: The system is licensed

for general use, is

free of charge and

does not require

registration.

Range: Depending on the

circumstances approx.

40 m under optimum

circumstances.

Radio-controlled sockets

RCR DP3 3711-A IP20 DK 3726:

Rated voltage: 230 V

50 Hz

Breaking capacity: 16 A, 3,680 W

Standby power

consumption: < 0,7 W

Transmission

frequency: 433.92 MHz

Advice: The radio-controlled sockets

each have a child protection socket

which signiﬁcantly increases safety at home.

The contacts are protected in such a way

that children cannot stick needles or other

sharp objects into them and thus get an

electric shock. Nevertheless, please keep

the device out of the reach of children

at all times.



Safety

Safety advice

Read these operating instructions and

safety advice carefully. Look at the dia-

gram page and familiarise yourself with

all functions of the device before start-

ing it up for the ﬁrst time.

Avoid danger to life from

electric shock!

 Only connect the radio-controlled

sockets to earthed 230 V

domestic

sockets.

 At all costs, avoid exposure to

damp and extreme temperatures.

 Only use the radio-controlled sockets

in enclosed spaces. They are not

suitable for outdoor use.

 Despite the child protection socket

, please keep the device out of

the reach of children at all times.

 Avoid overloading the device.

Overloading can cause a ﬁre hazard

or damage to the device. The maxi-

mum capacity is approx. 3,680 W

per radio-controlled socket.

 Please contact the service department

immediately operational faults arise.

8 GB

Introduction

 Do not open the device on any ac-

count. All necessary repairs should

only be carried out by the service

department or a specialist electrical

workshop.

 Before cleaning always disconnect

the device from the mains supply. In

this case always remove the radio-

controlled electrical outlet socket

from the mains wall socket and

remove all plugs from the device.

 Do not have one radio-controlled

electrical outlet socket inserted

behind the other.

 Do not use any additional child

protection devices for the radio-

controlled sockets. The connection

between the plug and the radio-

controlled socket could be impaired

and risk from overheating then arises.

The radio-controlled sockets already

have a child protection device which

prevents children from putting any

objects into the socket.

 Ensure that the outlet is installed

close to the connected product, is

easily accessible and that the prod-

uct is not operated while covered.

 If the device malfunctions, switch it

oﬀ immediately.

 These instructions are a component

of the device. If you pass the device

on to a third party, these instructions

must also be handed on.

 Do not switch the wireless sockets

erratically or unattended

Safety instructions

for batteries /

rechargeable

batteries

DANGER TO LIFE! Keep batter-

ies / rechargeable batteries out of

reach of children. If accidentally

swallowed seek immediate medical

attention.

DANGER OF EXPLO-

SION! Never recharge

non-rechargeable batter-

ies. Do not short-circuit batteries /

rechargeable batteries and / or

open them. Overheating, ﬁre or

bursting can be the result.

Never throw batteries / rechargea-

ble batteries into ﬁre or water.

Do not exert mechanical loads to

batteries / rechargeable batteries.

Risk of leakage of batteries /

rechargeable batteries

Avoid extreme environmental condi-

tions and temperatures, which could

aﬀect batteries / rechargeable bat-

teries, e.g. radiators / direct sunlight.

Avoid contact with the skin, eyes

and mucous membranes. In the

event of contact with battery acid,

thoroughly ﬂush the aﬀected area

with plenty of clean water and seek

immediate medical attention.

WEAR PROTECTIVE

GLOVES! Leaked or

damaged batteries /

rechargeable batteries can cause

burns on contact with the skin.

9 GB

Introduction / Setting up

Wear suitable protective gloves at

all times if such an event occurs.

In the event of a leakage of batter-

ies / rechargeable batteries, imme-

diately remove them from the

product to prevent damage.

Only use the same type of batteries /

rechargeable batteries. Do not mix

used and new batteries / recharge-

able batteries.

Remove batteries / rechargeable

batteries if the product will not be

used for a longer period.

Risk of damage of the product

Only use the speciﬁed type of bat-

tery / rechargeable battery!

Insert batteries / rechargeable bat-

teries according to polarity marks

(+) and (-) on the battery / recharge-

able battery and the product.

Clean the contacts on the bat-

tery / rechargeable battery and

in the battery compartment before

inserting!

Remove exhausted batteries /

rechargeable batteries from the

product immediately.



Setting up



Preparing the remote

control (ﬁg. A)

CAUTION! Danger of explosion in

the case of improper battery re-

placement. Only replace with the

same or equivalent battery type.

1. Open the battery compartment on

the back of the remote control by

turning the battery compartment

cover

anti-clockwise with the

aid of a coin or a screwdriver, then

removing the lid (open).

2. Insert the round cell battery type

CR 2032. Make sure you ﬁt the

battery with the correct polarity

(+ = up).

3. Place the battery compartment

cover

back on and lock it in

place by turning it in a clockwise

direction (close).

4. Press one of the ON / OFF buttons

to test whether the remote

control works; if it does, the power

indicator light will come on



Setting up the remote-

controlled socket

1. Plug the remote-controlled socket

into an earthed household socket.

2. The LED operating status display

will now ﬂash slowly for approx.

30 seconds after plugging in.

3. Aim the remote control at the

remote-controlled socket at a

distance of approx. 50 cm.

4. With the LED operating status dis-

play

ﬂashing, press the desired

ON button of the channel ON /

OFF button

(A, B, C or D) on

the remote control. The LED operat-

ing status display

will now light

continuously. You can now use the

remote control to switch a con-

nected device on or oﬀ using.

10 GB

Setting up / Setting-up operation

5. Repeat this process with the other

remote-controlled socket.

Note: You can use one channel

ON/OFF button

to switch sev-

eral remote-controlled sockets at

once. You can further train six re-

mote controls successively and use

these for a single receiver. This

means you can switch one appli-

ance on and oﬀ from up to six dif-

ferent places.

Note: In this case, synchronise

every remote-controlled socket with

the channel of the remote control.

Note: The codes for the remote

control will also remain stored

when changing the batteries.

Note: The codes will remain per-

manently stored when disconnect-

ing the remote-controlled socket

from the power supply.

Note: Avoid interference: Ensure

the various remote-controlled sock-

ets are approx. 50 cm apart.

Note: The LED operating status dis-

play

indicates if the remote-con-

trolled socket is in ON/OFF mode.

Deleting a code:

To delete a code, ﬁrst repeat steps

1 – 3.

With the LED operating display

ﬂashing, press the desired OFF

button of the channel ON/ OFF

button

(A, B, C or D) you wish

to delete on the remote control.

The LED operating status display

will ﬂash rapidly for approx. 2 sec-

onds to conﬁrm deletion.

It will then ﬂash slowly again for

approx. 30 seconds and a new

code entered.

Deleting all codes:

To delete all codes, ﬁrst repeats

steps 1 – 3.

Then with the LED operating status

display

ﬂashing, press the

ALL-OFF button

on the remote

control. The LED operating status

display

will ﬂash rapidly for

approx. 2 seconds to conﬁrm dele-

tion, then go out.



Setting-up operation



Using the radio-controlled

socket (ﬁg. B)

1. Put the radio-controlled socket into

any shuttered socket and connect

the appliance you want to operate.

2. Switch the electrical appliance on.

The radio-controlled socket can

only perform its switching function

when the device to be controlled is

switched on.

ATTENTION! FIRE HAZARD!

Do not attach any appliances which

could cause ﬁres or other damaged

if left unattended when switched

on. The maximum load of every

radio-controlled socket is approx.

3,680 W. Any overload could cause

a risk of ﬁre or damage to the device.

11 GB

Setting-up operation



Using the remote-

control (ﬁg. A)

The remote control will control up to 4

remote-controlled sockets (individually,

in groups or simultaneously).

1. Press the desired ON button of the

channel ON/ OFF button

(A, B,

C or D) on the remote control of

the device you wish to switch on.

The LED operating status display

will light.

2. Press the desired OFF button of the

channel ON / OFF button

(A,

B, C or D) on the remote control for

the device you wish to switch oﬀ.

The LED operating status display

will go out.

3. Conﬁrm the ALL ON / OFF button

to switch all remote-controlled

sockets simultaneously.



Trouble-shooting

If the remote control does not

work, please check the follow-

ing points:

Prob-

lem

The operating indica-

tor

on the remote

control device illumi-

nates but there is no

reaction

Rem-

edy

· Check if the battery still

has suﬃcient Ampere. If

necessary, install a new

battery.

Prob-

lem

No indicator light

on remote control

when pressing “ON”

or “OFF”

Rem-

edy

· Check if the battery is

inserted correctly.

· Check if the battery has

good contact, if necessary

press down

Prob-

lem

No reaction from

consumer

Rem-

edy

· Assign a new code to the

wireless socket (see “Set-

ting up the wireless socket”).

· Check - by walking closer to

it - that the range is correct

for the desired location.

Prob-

lem

Range is too small

Rem-

edy

· For large ranges, ensure

that as few walls and as

little furniture as possible

are in the way of the

remote control and the

radio-controlled socket.

· If the range is too small

at times, the reason could

be a remote control which

works on a similar fre-

quency. Whenever this re-

mote control is active, the

range declines (e.g. wire-

less headphones, radio-

controlled movement

alarms, radio gongs

etc.).

12 GB

Cleaning / Disposal / Guarantee and service



Cleaning

 Before cleaning, always disconnect

the radio-controlled socket from the

wall socket and remove all power

plugs from the device.

 Ensure that no liquids get into the

inside of the device. Use a soft cloth

to clean the housing. Never use

petroleum, solvents or cleaners

which corrode plastics.



Disposal

Electrical appliances

must not be disposed

of with domestic waste.

In accordance with Council Directive

2012 / 19 / EC on waste electrical and

electronic equipment (WEEE), used

electrical appliances, lighting equipment

and batteries have to be collected sep-

arately and recycled in an environmentally

friendly way. Enquire at your city council

or local government regarding the possi-

bilities of disposing of electronic waste in

a correct and environmentally friendly way.

The product packaging is made from

recyclable materials. Please dispose of

these in an environmentally friendly

way and ensure that they are sorted

into the appropriate collection bins.

Environmental damage

through incorrect dis-

posal of the batteries!

Batteries should not be disposed of with

domestic waste. They may contain toxic

heavy metals and are subject to hazard-

ous waste treatment rules and regulations.

That is why you should dispose of used

batteries at a local collection point.



Guarantee and service



Guarantee

This appliance comes with a 3-year

guarantee commencing on the date of

purchase. Please keep your receipt as

proof of purchase. The appliance has

been produced to the highest standards

and thoroughly checked before dispatch.

The guarantee only applies to faults in

materials or workmanship when used

properly. The guarantee lapses in cases

of unauthorized tampering. This guar-

antee does not restrict your legal rights.

If you wish to make a claim under the

guarantee, please telephone the service

centre. Only by doing so can we ensure

that your appliance is returned free of

charge.



Service address

BAT, Lindenstraße 35,

72074 Tübingen, Germany

E-mail: e[email protected]

Service Tel.: 00800 48720741

For further information, we recommend

you visit the service section / FAQs of

our home page www.dvw-service.com.

13 GB

There, you will also ﬁnd these instruc-

tions for use as a PDF document.

IAN 284705



Declaration of

conformity

We hereby declare that the wireless sys-

tem type RC DP3 4001-A DK 3726

complies with the provisions of

2014/53/EU and 2011/65/EU

(RoHS II).

The full text of the EU declaration of

conformity is available at:

www.dvw-service.com/konformitaet-

serklaerung/ke_1047765706.pdf



Manufacturer

BAT

Lindenstraße 35

DE-72074 Tübingen

GERMANY

15 DK

Legenda van de gebruikte pictogrammen .................Side 16

Indledning ................................................................................................Side 16

Anvendelse efter bestemmelsen ...................................................................Side 16

Indholdet ........................................................................................................Side 16

Betjeningselementer ......................................................................................Side 16

Tekniske specifikationer ................................................................................Side 17

Sikkerhed..................................................................................................Side 17

Bemærkninger om sikkerheden ....................................................................Side 17

Sikkerhedshenvisninger for batterier / akkuer .............................................Side 18

Forberedning .........................................................................................Side 19

Fjernbetjening forberedes .............................................................................Side 19

Radiostikkontakten forberedes .....................................................................Side 19

Ibrugtagning ..........................................................................................Side 20

Anvendelse af radiostikdåse ........................................................................Side 20

Anvendelse af fjernbetjening ........................................................................Side 20

Fejlhenvisninger .............................................................................................Side 21

Rengøring .................................................................................................Side 21

Bortskaffelse ..........................................................................................Side 22

Garanti og service .............................................................................Side 22

Garantierklæring ........................................................................................... Side 22

Serviceadresse ..............................................................................................Side 22

Konformitetserklæring ...................................................................................Side 22

Producent ....................................................................................................... Side 23

Indholdsfortegnelse

16 DK

Legenda van de gebruikte pictogrammen / Indledning

Fjernbetjente stikkontakter



Indledning



Anvendelse efter

bestemmelsen

Radiostikdåsesættet er egnet til fjernstyret

til- og frakobling af elektriske apparater.

Alle forandringen af apparatet er i strid

med formålet og kan betyde alvorlige

risici for ulykkestilfælde. Alle forandringer

på apparatet er i strid med formålet og

kan betyde alvorlige risici for ulykker.

Producenten påtager sig intet ansvar

for skader efter anvendelse i strid med

formålet.



Indholdet

Undersøg efter udpakning af dette sæt

at indholdet er fuldstændigt.

4 radiostikkontakter

1 4-kanal-fjernbetjening

1 knap CR 2032, Litium batteri 3 V

(til fjernbetjening)

1 betjeningsvejledning



Betjeningselementer

Fjernbetjening (illustr. A):

Driftskontrollampe

Kanal-ON- / OFF-tast kanal A, B, C, D

ALL-ON- / OFF-tast (ma-

ster-TÆND / SLUK)

Batteribeholderdæksel

Legenda van de gebruikte pictogrammen

Volt (vekselstrøm) Forsigtig! brandfare!

Hertz (frekvens)

Elektroapparater må ikke

smides i husholdningsaﬀald!

Watt (aktiv eﬀekt)

Miljøskader på grund af

forkert bortskaﬀelse af

batterier!

Overhold advarsels- og

sikkerhedshenvisninger!

Microswitch med en

kontaktåbning < 3 mm

Fare for elektrisk stød! EU-konform

17 DK

Indledning / Sikkerhed

Radiostikkontakt (illustr. B):

LED-driftsvisning

Børnesikret stikkontakt



Tekniske

speciﬁkationer

Radiostyrede stikdåser

RC DP3 4001-A DK 3726

Fjernbetjening

RCT DS1 CR-A 3726:

Batterier: CR 2032,

lithium 3 V

Frekvensbånd: 433,05MHz -

434,79MHz

Radiofrekvens: 433.92 MHz

Max.

sendeeﬀekt: 5 dBm

Tilladelse: Systemet råder

over en generel

tilladelse (BZT)

og er fritaget for

anmeldelses- og

gebyrpligt.

Rækkevidde: Afhængigt af de

omgivende betin-

gelser ca. 40 m

ved optimale

betingelser.

Radiostikdåse

RCR DP3 3711-A IP20 DK 3726:

Nominel spænding: 230 V

, 50 Hz

Kontakteﬀekt: 16 A, 3.680 W

Stand-by-forbrug: < 0,7 W

Transmissionsfrekvens: 433,92 MHz

Henvisning: Radiostikdåserne råder

begge over en børnesikrings-stikdåse

Derved bliver sikkerheden i huset klart

forøget. Kontakterne er sikret tilsvarende

så børn ikke kan etablere nogen ledende

forbindelse (f.eks. med en nål eller lig-

nende). Alligevel bør apparatet opbeva-

res uden for børns rækkevidde.



Sikkerhed

Bemærkninger

om sikkerheden

Betjeningsvejledning og sikkerhedshen-

visningerne bør gennemlæses opmærk-

somt. Klap billedsiden ud, og gør Dem

fortrolig med alle apparatets funktioner

før De tager det i brug første gang.

Undgå livsfare fra elektriske

stød!

 Radiostikdåserne må kun sluttes til

jordede 230 volts stikdåser.

 Påvirkninger fra fugtighed og eks-

treme temperaturer skal under alle

omstændigheder undgås.

 Anvend kun radiostikdåserne i luk-

kede rum. De er ikke egnet til uden-

dørs anvendelse.

 Uanset stikdåsen med børnesikring

bør De opbevare stikdåsen

uden for børnsrækkevidde.

 Undgå overbelastning af apparatet.

Ved overbelastning kan der optræde

brandfare eller skader på apparatet.

Den maximale belastbarhed andra-

ger ca. 3.680 W pr. radiostikdåse.

18 DK

Sikkerhed

 I tilfælde af funktionsforstyrrelser

bedes De omgående henvende

Dem til serviceafdelingen.

 Undlad under alle omstændigheder

at åbne apparatet på egen hånd.

Lad nødvendige reparationer udeluk-

kende udføre af serviceafdelingen

eller et elektro-fagværksted.

 Før rengøring af apparatet skal

strømmen ubetinget afbrydes. I så-

danne tilfælde skal radiostikdåsen

skilles fra el-nettet og alle stikkon-

takter fra apparatet.

 Radiostikdåserne må ikke sættes i

efter hinanden.

 Anvend ingen yderligere børnesik-

ringer til radiostikdåserne. Forbindel-

sen mellem stikkontakt og

radiostikdåse kan blive forstyrret,

og der er da risiko for overophed-

ning. Radiostikdåserne råder alle-

rede over en børnesikring der

forhindrer at børn kan stikke gen-

stande ind i stikdåsen.

 Sørg for at stikkontakten er anbragt

tæt på den tilsluttede produkt, er let

tilgængelig, og at produktet ikke

betjenes mens dækket.

 I tilfælde af uregelmæssigheder skal

apparatet straks slås fra.

 Denne vejledning er en bestanddel

af apparatet. Derfor skal det videre-

gives til radiostikdåsen, hvis De

giver apparatet bort.

 Tænd ikke ukontrolleret for radio-

stikkontakterne og ikke uden at

disse er uden opsyn.

Sikkerhedshenvis

ninger

for batterier /

akkuer

LIVSFARE! Hold batterier / akkuer

udenfor børns rækkevidde. Opsøg i

tilfælde af slugning straks lægehjælp!

EKSPLOSIONSFARE!

Genoplad aldrig ikkeop-

ladelige batterier igen.

Kortslut ikke batterier / akkuer og /

eller åben disse ikke. Der kan opstå

overophedning, brandfare eller eks-

plosion.

Smid batterier / akkuer aldrig i ild

eller vand.

Udsæt batterier / akkuer ikke for

mekanisk belastning.

Risiko for udsivning fra batteri-

ene / akkuerne

Undgå ekstreme betingelser og

temperaturer, som kan påvirke bat-

terier / akkuer, f.eks. varmelegemer /

direkte sollys.

Undgå kontakt med hud, øjne og

slimhinder! Skyl ved kontakt med

batterisyre de berørte steder med

det samme med klart vand og op-

søg omgående en læge!

BÆR BESKYTTELSES-

HANDSKER! Udløbne

eller beskadigede batte-

rier / akkuer kan forårsage ætsninger

ved berøring med huden. Bær i dette

tilfælde derfor egnede beskyttelses-

handsker.

I tilfælde af en lækage hos batteri-

erne / akkuerne, skal De fjerne disse

19 DK

Sikkerhed / Forberedning

med det samme fra produktet for at

undgå beskadigelser.

Anvend kun batterier / akkuer af

samme type. Bland ikke gamle

batterier / akkuer med nye!

Fjern batterierne / akkuerne, når

produktet ikke anvendes i en længere

periode.

Risiko for beskadigelse af

produktet

Anvend udelukkende den angivne

batteri- / akkutype!

Indsæt batterier / akkuer iht. polari-

tetsmærkningen (+) og (-) til batteri /

akku og produktet.

Rengør kontakter ved batteri / akku og

i batterirummet inden ilægningen!

Fjern brugte batterier / akkuer om-

gående fra produktet.



Forberedning



Fjernbetjening

forberedes (illustr. A)

OBS! Eksplosionsfare ved uhensigt-

mæssig udskiftning af batteriet. Er-

statning kun gennem den samme

eller lignende batteritype.

1. Åben batterirummet på fjernbetje-

ningens bagside, idet De drejer

batteriafdækningen 4 med en mønt

eller en skruetrækker mod urets ret-

ning og tager denne ud (open).

2. Indsæt knapcellen af type CR 2032.

Vær opmærksom på den rigtige

polaritet (+ = oppe).

3. Læg batterirumsafdækningen 4 i

gen og aﬂås denne ved at dreje i

urets retning (close).

4. En af ON- / OFF-tasterne 2 eller 3

trykkes, for at kontrollere, om fjern-

betjeningen virker; hvis den gør,

lyser driftskontrollampen.



Radiostikkontakten

forberedes

1. Stik radiostikkontakten i den jordfor-

bundne husholdningsstikkontakt.

2. LED-driftvisningen

blinker kun

langsomt i ca. 30 sekunder fra

stikket er sat i.

3. Hold fjernbetjeningen rettet mod

radiostikkontakten i en afstand på

ca. 50 cm.

4. Tryk mens LED-driftvisningen

blinker den ønskede ON-tast hos

kanal-ON- / OFF-tasten

(A, B, C

eller D) på fjernbetjeningen. Nu

lyser LED-driftsvisningen

vedva-

rende. De kan nu med denne

taste tænde eller slukke en tilsluttet

forbruger med fjernbetjeningen.

5. Gentag denne procedure med den

anden radiostikkontakt.

Henvisning: Med en kanal-

ON- / OFF-tast

kan De tænde

ﬂere radiostikkontakter samtidigt.

Desuden kan seks fjernbetjeninger

indlæres efter hinanden og disse

kan så bruges til en enkelt forbruger.

På den måde kan apparatet betjenes

fra op til seks forskellige steder.

20 DK

Forberedning / Ibrugtagning

Henvisning: Synkronisér i dette

tilfælde hver radiostikkontakt med

fjernbetjeningens kanal.

Henvisning: Fjernbetjeningens

kode gemmes også, når batterierne

skiftes.

Henvisning: Når radiostikkontak-

ten tages fra strømnettet, så forbliver

kodningerne gemt for altid.

Henvisning:Undgå forstyrrelser:

Sørg for at afstanden mellem de

forskellige radiostikkontakter er

ca. 50 cm.

Henvisning: LED-driftvisningen

viser, om radiostikkontakten

beﬁnder sig i ON- / OFF-modus.

Slet kodningen:

For at slette en kodning igen,

gentag først proceduren 1. – 3.

Tryk mens LED-driftvisningsblinken

er i gang kanal-ON- / OFF-tas-

tens

(A, B, C eller D) ønskede

OFF-taste på fjernbetjeningen, som

De vil slette.

LED-driftvisningen

blinker til

bekræftelse af sletningsproceduren

for ca. 2 sekunder hurtigt.

Efterfølgende blinker denne igen

langsomt for ca. 30 sekunder og

kan indlære en ny kodning.

Slet alle kodninger:

For at slette alle kodninger, gentag

først proceduren 1. – 3.

Tryk under LED-driftvisningens

blinken ALL-OFF-tasten

på fjern-

betjeningen. LED-driftvisningen

blinker til bekræftelse af sletnings-

proceduren for ca. 2 sekunder

hurtigt og slukkes efterfølgende.



Ibrugtagning



Anvendelse af

radiostikdåse (illustr. B)

1. Radiostikdåsen stikkes ind i en sikker-

hedskontaktstikdåse og sluttes til den

strømforbruger der skal kobles.

2. Apparatet slås til. Radiostikdåsen

kan kun varetage koblingsfunktionen

hvis det det pågældende apparat

er slået til.

FORSIGTIG! BRANDFARE! Til-

slut ikke apparater hvis utilsigtede

tilkobling kan forårsage brand eller

andre skader. Den maksimale belast-

barhed pr. radiostikdåse andrager

ca. 3.680 W. En overbelastning kan

forårsage brandfare eller skader på

apparatet.



Anvendelse af

fjernbetjening (illustr. A)

Fjernbetjeningen styrer op til 4 ra-

diostikkontakter (enkeltvis, i grupper el-

ler alle samtidigt).

1. Tryk kanal-ON- / OFF-tastens

(A, B, C eller D) ønskede OFF-taste

på fjernbetjeningen, til den forbru-

ger som De vil tænde. LED-driftvis-

ningen

lyser.

2. Tryk kanal-ON- / OFF-tastens

(A, B, C eller D) ønskede OFF-taste

på fjernbetjeningen, til den

21 DK

Ibrugtagning / Rengøring

forbruger som De vil slukke. LED-

driftvisningen

slukkes.

3. Betjen ALL-ON- / OFF-tasten

, for

at tænde alle radiostikkontakter

samtidigt.



Fejlhenvisninger

Hvis fjernkoblingen ikke funge-

rer, eftergås systemet på

følgende punkter:

Pro-

blem

Driftskontrollampe

på fjernbetjeningen

lyser, ingen reaktion

Af-

hjælp -

ning

· Kontroller om batteriets

ladetilstand stadig er til-

strækkelig. Indsæt i givet

fald et nyt batteri.

Pro-

blem

Driftskontrollampe

på fjernbetjeningen

lyser ikke ved tryk

på ”ON” eller ”OFF”

Af-

hjælp -

ning

· Kontroller om batteri er

lagt rigtigt i.

· Kontroller om batteri har

god kontakt med klem-

merne, trykkes evt. på.

Pro-

blem

Ingen reaktion hos

forbrugeren

Af-

hjælp -

ning

· Se efter om forbrugeren

er slået til.

· Giv radiostikkontakten

en ny kode (se „Forbe-

red radiostikkontakt“,

punkt 4).

· Man kan ved tilnærmelse

fastslå om rækkevidden

er tilstrækkelig for den

valgte position.

Pro-

blem

Rækkevidden for

ringe

Af-

hjælp -

ning

· Forvis Dem for store

rækkevidder om at der

ligger færrest mulige

vægge, møbler osv.

mellem fjernbetjening

og radiostikdåse.

· Hvis rækkevidden kun er

ringe af og til, kan grun-

den ligge i en fjernbetje-

ning der arbejder i en

lignende frekvens. Så

snart denne fjernbetje-

ning er aktiv, synker

rækkevidden (f.eks. tråd-

løse hovedtelefoner, ra-

dio-bevægelsesmelder,

radiogong osv.).



Rengøring

 Inden rengøringen skal radiostikdå-

sen altid trækkes ud af stikkontakten

og alle stikkontakter ud af apparatet.

Page is loading ...

Silvercrest WIRELESS SOCKET SET Operation and Safety Notes

Brand: Silvercrest

Model: WIRELESS SOCKET SET

Type: Operation and Safety Notes

This manual is also suitable for

284705

Download PDF

report

in other languages

Deutsch: Silvercrest WIRELESS SOCKET SET
dansk: Silvercrest WIRELESS SOCKET SET

Silvercrest WIRELESS SOCKET SET Operation and Safety Notes

This manual is also suitable for

Silvercrest WIRELESS SOCKET SET Operation and Safety Notes

in other languages

Related papers

Other documents