Goldmund EIDOS 36U+ User manual

Category
Blu-Ray players
Type
User manual
USER MANUAL
USER MANUALUSER MANUAL
USER MANUAL
GOLDMUND EIDOS 36U+
Universal Player
Thank you for purchasing the Goldmund EIDOS 36U+ Universal Player.
Please take some time to read this manual. It will provide you with useful information
to make your pleasure of listening to the EIDOS 36U+ even higher.
INTRODUCTION
INTRODUCTIONINTRODUCTION
INTRODUCTION
GOLDMUND EIDOS 36U+ Universal Player
Goldmund was founded in 1978 and has ever since been dedicated to the accurate
reproduction of sound and image.
At Goldmund, we strive to lead in the creation, development and manufacture of the
industry’s most advanced technologies, including audio and video systems, home-
networking and music distribution.
The guiding principle at Goldmund is to produce a precise sound with the least
possible loss of quality through the different stages. Goldmund will never adopt a
technology before it is sufficiently developed to satisfy the high quality standards we
set. This is why Goldmund has often rejected mainstream technologies and
developed its own.
GOLDMUND EIDOS 36U+ – Universal Player -
3
Table of Contents
Table of ContentsTable of Contents
Table of Contents
1 FEATURES & COMPATIBILITY 5
2 UNPACKING 6
3 POWER SUPPLY VOLTAGE SELECTION 7
4 CHOICE OF PLAYER LOCATION 7
5 POWER CONNECTION 8
6 BACK PANEL CABLE CONNECTIONS 8
7 BASIC OPERATIONS 14
8 SETTINGS 16
9 CLEANING 30
10 MAINTENANCE 30
11 TECHNICAL SPECIFICATIONS 31
12 REMOTE CONTROL 33
GOLDMUND EIDOS 36U+ – Universal Player -
4
W A
W A W A
W A R N I N G
R N I N G R N I N G
R N I N G
This high quality universal player possesses
technical features which are necessary for
accurate tracking of today’s best Blu-Rays,
DVDs, SACDs and CDs.
Only careful installation and use can
provide the satisfaction you are expecting.
The installation instructions must be carried
out in full and the mentioned precautions
taken to get the expected result and to
avoid impairing performance.
No connection or manipulation may be done
before reading these instructions. Damage
to the universal player may result if the
following instructions are not understood
and applied.
GOLDMUND EIDOS 36U+ – Universal Player -
5
1
1 1
1
FEATURES & COMPATIBILITY
FEATURES & COMPATIBILITY FEATURES & COMPATIBILITY
FEATURES & COMPATIBILITY
1.1 COMPATIBILITY
Please note that the Goldmund Eidos 36U+ is equipped with an Oppo player that is
compatible with the following formats:
High Definition (HD) movie and music discs
High Definition (HD) movie and music discsHigh Definition (HD) movie and music discs
High Definition (HD) movie and music discs
BD: Blu-ray disc with Bonus View and BD-Live content, including Blu-ray 3D
discs. A 3D-capable display with compatible glasses is required for 3D playback.
BD-R/RE, both single and dual-layer are also supported.
High quality movie and music discs
High quality movie and music discsHigh quality movie and music discs
High quality movie and music discs
DVD: Plays commercially-released DVDs, as well as finalized DVD±R/RW.
DVD-A: High-resolution stereo or multi-channel audio. Some DVD-Audio discs
also contain a DVD-Video portion.
SACD: High-resolution stereo or multi-channel audio. Note: some SACDs use a
hybrid format with both CD and high resolution DSD layer.
CD: Supports standard Red Book CDs, as well as HDCD and CD-R/RW.
AVCHD: High-definition digital video camera format, often in the form of a
DVD±R or flash memory.
Content Source Direct Output Resolution
NTSC DVD 480i
PAL DVD 576i
Most Blu-Ray Movies (film-source)
1080p 23.976Hz or 1080p 24Hz
Most Blu-Ray TV shows or
Concerts (video-source)
1080i
SACD and DVD-Audio 1080p
GOLDMUND EIDOS 36U+ – Universal Player -
6
1
1 1
1
FEATURES & COMPATIBILITY (Ctd.)
FEATURES & COMPATIBILITY (Ctd.)FEATURES & COMPATIBILITY (Ctd.)
FEATURES & COMPATIBILITY (Ctd.)
1.2 ASSOCIATED EQUIPMENT
Sound technicians, musicians, or users who demand the very best in sound
transcription, may decide to use of one of our separate D/A converters, such as
the Goldmund Mimesis 20H. However, the D/A converters built into the Eidos
36U+ are high quality units that can be used with all systems and formats.
To obtain the best quality out of your system, we recommend using one of the
Goldmund acoustic processors (Mimesis 32.5 or Mimesis 16.5).
2
2 2
2
UNPACKING
UNPACKING UNPACKING
UNPACKING
You will find in the Eidos 36U+ Box:
• The universal player itself,
• A remote control,
• The power cord,
• This user manual.
ATTENTION
ATTENTIONATTENTION
ATTENTION
If you need to return the player to the factory or to your local representative for
repair, please note that it must be repackaged in the original packing. This
packaging has been specifically designed to protect the Eidos 36U+. Use of
alternative packaging is likely to result in damages to the unit and invalidates its
warranty.
GOLDMUND EIDOS 36U+ – Universal Player -
7
3
33
3 POWER SUPPLY VOLTAGE SELECTION
POWER SUPPLY VOLTAGE SELECTIONPOWER SUPPLY VOLTAGE SELECTION
POWER SUPPLY VOLTAGE SELECTION
The power supply of your unit has been adjusted to operate with the AC voltage of
your area. Check on the back panel of the unit if in any doubt. If you move after
purchasing the Universal Player to an area using a different voltage, do not forget to
switch the back panel selector to the voltage used in your new country of residency.
The unit can operate at 50 or 60 Hz mains.
4
4 4
4
CH
CHCH
CHOICE OF PLAYER LOCATION
OICE OF PLAYER LOCATIONOICE OF PLAYER LOCATION
OICE OF PLAYER LOCATION
Thanks to the specific quality of the Goldmund Mechanical Grounding and the
Goldmund Magnetic Damping construction, the choice of the player location is not
critical when using the Eidos 36U+. Feedback is mostly so low that no special
precaution is required. Nevertheless, we recommend you position the player as
far as you can from the speakers if you want to totally avoid the air coupling
between the speakers and the player.
Locate the player to provide the most rigid possible connection to the ground.
Solid coupling is essential and the support used must be as rigid and solid as
possible.
GOLDMUND EIDOS 36U+ – Universal Player -
8
5
5 5
5
POWER CONNECTION
POWER CONNECTIONPOWER CONNECTION
POWER CONNECTION
Plug the AC power cord to the back of the Eidos 36U+ and in a wall socket.
Switch the back power switch to ON”. The front display will light up as soon as
you will press “OPEN” button on the front panel or when pressing the remote
control “POWER” button, indicating that the unit is powered on.
Unplug the power cord if you are not going to use the player for an extended period
of time. Hold the power plug when unplugging. Do not pull on the cord.
6
6 6
6
BACK PANEL CABLE CONNECTIONS
BACK PANEL CABLE CONNECTIONSBACK PANEL CABLE CONNECTIONS
BACK PANEL CABLE CONNECTIONS
6.1 VIDEO CONNECTIONS
The Eidos 36U+ offers 2 different types of video signal output:
• HDMI VIDEO OUTPUT
• DIGITAL VIDEO OUTPUT
There are two HDMI output connectors; we recommend using the HDMI 1 for
video and HDMI 2 for audio. This configuration is required to offer the best video
quality.
NOTE
NOTENOTE
NOTE
The Eidos 36U+ uses the HDCP stands for
High-bandwidth Digital Content Protection
in HDMI connection. To prevent copying of
digital audio and video content as it travels
across connections
HDCP encrypt the digital audio and video
content. The TV must support HDCP in
order to decrypt and properly display the
content.
NOTE
NOTENOTE
NOTE
In all system and specially in HDMI
wiring, to guarantee the HD signal
throughout the full system, Goldmund
recommends to perform all the wiring
when all units are turn off and
successively turn on the units
according to the following combination:
screen, acoustic processor or
preamplifier and finally the player.
GOLDMUND EIDOS 36U+ – Universal Player -
9
6
6 6
6
BACK PANEL CABLE CONNECTIONS (Ctd.)
BACK PANEL CABLE CONNECTIONS (Ctd.)BACK PANEL CABLE CONNECTIONS (Ctd.)
BACK PANEL CABLE CONNECTIONS (Ctd.)
6.2 AUDIO CONNECTIONS
HD connectio
HD connectioHD connectio
HD connection: Connecting to a Receiver/Amplifier with the
n: Connecting to a Receiver/Amplifier with the n: Connecting to a Receiver/Amplifier with the
n: Connecting to a Receiver/Amplifier with the
HDMI Output
HDMI OutputHDMI Output
HDMI Output
See § 6.1 on page 8
This player has been set up, as recommended by Goldmund, to have HDMI output in
LPCM format.
In case you would need to restore the Goldmund factory setup of you player, follow
this sequence on the Setup Menu of the Eidos 36U+:
Setup Menu > Audio Format Setup > HDMI Audio
LPCM
PCM connection: Connect
PCM connection: ConnectPCM connection: Connect
PCM connection: Connecting to a Receiver/Amplifier in
ing to a Receiver/Amplifier in ing to a Receiver/Amplifier in
ing to a Receiver/Amplifier in
PCM or Digital 7.1/5.1 multichannel
PCM or Digital 7.1/5.1 multichannel PCM or Digital 7.1/5.1 multichannel
PCM or Digital 7.1/5.1 multichannel
Goldmund recommends that the greatest care is taken when selecting the cable
linking the player to the D/A converter or the preamplifier. The very accurate
signal provided by the Eidos 36U+ can easily be ruined by an imperfect
connection. Use a "Goldmund Lineal" cable from the coaxial output if you want
to achieve the most accurate jitter-free connection for CD playback.
Setup Menu > Audio Format Setup > Coaxial/Optical Output
BITSTREAM
NOTE
NOTENOTE
NOTE
Due to copyright restrictions, SACD
audio cannot be sent through the
coaxial or optical digital audio output.
To listen to SACDs, please use the
HDMI or analog audio connections.
NOTE
NOTENOTE
NOTE
Due to copyright restrictions and
bandwidth limitations, full resolution
audio from DVD-Audio discs cannot be
sent through the coaxial or optical
digital audio output. To listen to DVD
Audio in full resolution, please use the
HDMI or analog audio connections.
GOLDMUND EIDOS 36U+ – Universal Player -
10
6
6 6
6
BACK PANEL CABLE CONNECTIONS (Ctd.)
BACK PANEL CABLE CONNECTIONS (Ctd.)BACK PANEL CABLE CONNECTIONS (Ctd.)
BACK PANEL CABLE CONNECTIONS (Ctd.)
Analog connection: Connecting to a Receiver/Amplifier in
Analog connection: Connecting to a Receiver/Amplifier in Analog connection: Connecting to a Receiver/Amplifier in
Analog connection: Connecting to a Receiver/Amplifier in
Analog 7.1/5.1 mul
Analog 7.1/5.1 mulAnalog 7.1/5.1 mul
Analog 7.1/5.1 multichannel
tichanneltichannel
tichannel
Please use 8 interconnect cables to connect the FRONT-L (Front Left), FRONT-R
(Front Right), SURR-L (Surround Left), SURR-R (Surround Right), Center, SUB
(Subwoofer), REAR-L (Surround Back Left) and REAR-R (Surround Back Right),
analog output terminals of the Eidos 36U+ to the corresponding multi-channel analog
audio input of your A/V receiver or amplifier. If the A/V receiver or amplifier only has
5.1ch audio input, the REAR-L (Surround Back Left) and REAR-R (Surround Back
Right) terminals do not need to be connected and set the Down Mix option in the
Setup Menu to 5.1ch to make sure that any 7.1 channel signals are converted to 5.1
channels. Goldmund recommends using Goldmund Interco cables.
Connecting to a Stereo Audio System
Connecting to a Stereo Audio SystemConnecting to a Stereo Audio System
Connecting to a Stereo Audio System
If your audio system only offers stereo audio inputs, or if you would like to connect a
dedicated stereo system in addition to the surround system, you can connect it to the
FRONT-L & FRONT-R audio output terminals of the player.
NOTE
NOTENOTE
NOTE
The stereo audio output terminals will always provide a down-mixed stereo signal
from multi-channel sources. The “Down Mix” and other speaker settings in the Audio
Processing Setup Menu do not affect the stereo audio output.
Speaker Configuration applies to the multi-channel analog audio outputs only. All
digital bitstream and LPCM outputs are unaffected by these settings.
GOLDMUND EIDOS 36U+ – Universal Player -
11
6
6 6
6
BACK PANEL CABLE CONNECTIONS (Ctd.)
BACK PANEL CABLE CONNECTIONS (Ctd.)BACK PANEL CABLE CONNECTIONS (Ctd.)
BACK PANEL CABLE CONNECTIONS (Ctd.)
6.3 INTERNET & FIRMWARE
Internet connection
Internet connectionInternet connection
Internet connection
In order to utilize the BD-Live feature or to update the firmware via the Internet, the
player needs to be connected to a broadband Internet connection. It is not necessary
to connect to the Internet if you do not intend to use the network streaming, BD-Live
or online firmware update features.
Plug one end of a network cable (Category 5/5E straight Ethernet cable) into the
LAN port on the back of the Eidos 36U+.
Plug the other end of the network cable into a LAN port on the broadband router
or modem.
After physically connecting the player to a broadband Internet connection, some
network configuration may be required. Refer to your official Goldmund
representative for more details.
Firmware updates
Firmware updatesFirmware updates
Firmware updates
The Eidos 36U+ supports the BD-Live feature offered on some Blu-ray Disc titles.
BD-Live offers extra downloadable content and additional online interactive
programs. Content available on BD-Live varies by disc and studio, and may include
additional subtitles, commentaries, movie trailers, games, and online chat.
Connecting the player to the Internet will also allow the player to obtain firmware
updates.
Setup Menu > Device Setup > Firmware Information
Setup Menu > Device Setup > Firmware Upgrade
GOLDMUND EIDOS 36U+ – Universal Player -
12
6
6 6
6
BACK PANEL CABLE CONNECTIONS (Ctd.)
BACK PANEL CABLE CONNECTIONS (Ctd.)BACK PANEL CABLE CONNECTIONS (Ctd.)
BACK PANEL CABLE CONNECTIONS (Ctd.)
Firmware Information: Displays the currently installed firmware version.
Firmware Upgrade: Upgrades the player’s firmware. This operation is only
available when the playback is completely stopped or when there is no disc
loaded.
The firmware is the system software that controls the features and functions of the
player. Since the Blu-ray Disc specifications are new and evolving, it is possible that
a Blu-ray Disc manufactured after the player was manufactured uses certain new
features of the Blu-ray Disc specifications. To ensure the best possible viewing
experience, the player may need a firmware update from time to time.
If the player has a working Internet connection (see page 11), you may upgrade the
player directly over the Internet. Please follow the instructions on your TV screen.
Firmware Notification: Allows you to set whether the player should
automatically check for new firmware versions on the Internet server and notifies
you about new firmware.
On Checks for firmware updates automatically and notifies the user about
new firmware. Requires a working network connection.
Off – Does not check for new firmware version automatically.
GOLDMUND EIDOS 36U+ – Universal Player -
13
6
6 6
6
BACK PANEL CABLE CONNECTIONS (Ctd.)
BACK PANEL CABLE CONNECTIONS (Ctd.)BACK PANEL CABLE CONNECTIONS (Ctd.)
BACK PANEL CABLE CONNECTIONS (Ctd.)
6.4 EXTERNAL CONNECTIONS
IR connection
IR connectionIR connection
IR connection
The Eidos 36U+ features an IR IN port on its back panel. If the player is to be
installed in an equipment cabinet where direct line-of-sight is not available for the
remote control, you can purchase an external IR Remote, Goldmund recommends to
use the iGoldmund Remote control in addition of your player.
WARNING
WARNINGWARNING
WARNING
When an external IR sensor is plugged in, the original IR sensor window on the front
panel will be disabled.
When an IR IN port receives a connector, the main remote functions are not
available.
Goldmund cannot guarantee that the IR IN port will be compatible with devices
that are not recommanded by Goldmund. Connecting the IR IN port to an
incompatible device may result in damage to the connected device or the player.
• Please contact your official Goldmund support if you plan to integrate the player
into an IR distribution system. Customer support can provide recommendations
on how to properly connect the control signals.
RS232 control
RS232 controlRS232 control
RS232 control
The Eidos 36U+ has an RS232 control port and can be integrated into most custom
home theater control systems.
Please ask your custom installer to contact Goldmund for the RS232 control
protocol.
GOLDMUND EIDOS 36U+ – Universal Player -
14
7
77
7
BASIC OPERATIONS
BASIC OPERATIONS BASIC OPERATIONS
BASIC OPERATIONS
7.1 PLAYING VIDEO CONTENTS
Disc Playback
Disc PlaybackDisc Playback
Disc Playback
1. Press the POWER button to turn on the player.
2. Press the OPEN/CLOSE (OPEN) button to eject the disc tray.
3. Place the disc with the label side facing up and the recorded side facing down.
4. Press the OPEN/CLOSE (OPEN) button again to retract the tray.
5. The player will read the disc information and starts playback.
6. Depending on the content of the disc, a menu or navigation screen may appear.
Please use the navigation ARROW and SELECT buttons to select the content to
play.
7. To stop playback, press the STOP button.
8. To turn off the player, press the POWER button.
NOTE
NOTENOTE
NOTE
• During DVD and some Blu-ray Disc playback, pressing the STOP button for the first
time brings the player to a pre-stop mode. You can resume playback from the
stopped point by pressing the PLAY button. This pre-stop mode allows you to
change the player settings and then resume playback. To completely stop playback,
press the STOP button twice.
• Certain Blu-ray Discs with BD-Java technology do not support the pre-stop mode.
Pressing the STOP button during playback of such discs will completely stop the
disc.
Pressing the PLAY button once the disc is stopped will restart it from the very
beginning.
• This unit consumes a tiny amount of power even when it is turned off to STANDBY
mode. If it is not to be used for a long time, unplug it from the household AC outlet.
GOLDMUND EIDOS 36U+ – Universal Player -
15
7
7 7
7
BASIC OPERATIONS (Ctd.)
BASIC OPERATIONS (Ctd.)BASIC OPERATIONS (Ctd.)
BASIC OPERATIONS (Ctd.)
7.1 PLAYING VIDEO CONTENTS (Ctd.)
Audio Language/Track Selection
Audio Language/Track SelectionAudio Language/Track Selection
Audio Language/Track Selection
1. To select the audio language or track, press the AUDIO button on the remote
control during playback.
2. Repeat pressing the AUDIO button to circle through all available language or
audio tracks.
Subtitle Selec
Subtitle SelecSubtitle Selec
Subtitle Selection
tiontion
tion
1. When playing a DVD, Blu-ray Disc or other video programs recorded with
subtitles, press the SUBTITLE button on the remote control to select the desired
subtitle.
2. Repeat pressing the SUBTITLE button to circle through all available subtitles.
3. To turn off subtitles, repeat pressing the SUBTITLE button until the subtitle is
turned off.
Pure Audio Mode
Pure Audio ModePure Audio Mode
Pure Audio Mode
You can enjoy higher quality audio by turning off the video processing and output.
The Pure Audio mode reduces any potential interference between the video and
audio signals.
1. Press the PURE AUDIO button on the remote control to turn off video and enter
Pure Audio mode. Video output will be turned off.
2. Press the PURE AUDIO button again to resume video and cancel Pure Audio
mode.
NOTE
NOTENOTE
NOTE
Availability of languages and
audio channels varies by disc.
Some DVD-Audio discs allow
audio track selection with the
AUDIO button, while others
require the user to select from
the audio setup menu of the
disc. When playing an SACD
with both multi-channel and
stereo contents, the AUDIO
button can be used to switch
between the two formats.
NOTE
NOTENOTE
NOTE
•Pure Audio mode is
automatically cancelled when
the unit is switched off or when
playback is stopped.
•Since HDMI carries audio
together with video, the HDMI
video signal cannot be
completely turned off. A black
screen is transmitted instead
to minimize any potential
interference.
GOLDMUND EIDOS 36U+ – Universal Player -
16
7
7 7
7
BASI
BASIBASI
BASIC OPERATIONS (Ctd.)
C OPERATIONS (Ctd.)C OPERATIONS (Ctd.)
C OPERATIONS (Ctd.)
7.2 MEDIA FILE PLAYBACK
In addition to playing standard disc-based formats such as Blu-ray Disc, DVD, CD
and SACD, the Goldmund Eidos 36U+ Universal player can play media files. You
can enjoy digital music, movies and photos stored on an optical disc (recordable CD
or DVD). Due to the variation of media, encoding software and techniques used,
compatibility cannot be guaranteed for all user-created or downloaded contents.
Support for such contents is on a best effort basis.
8
8 8
8
SET
SETSET
SETTINGS
TINGS TINGS
TINGS
The Setup Menu of the Eidos 36U+ player presents many setup and configuration
options. For most users, the default configuration will be sufficient and will not require
any changes to the settings. However if you need to configure the player to perfectly
match your home theater settings and viewing preferences, please refer to the
following sections for details about each configuration option.
Using the Setup Menu System
Using the Setup Menu SystemUsing the Setup Menu System
Using the Setup Menu System
In many places of this guide, the player’s Setup Menu needs to be adjusted to match
your specific audio/video configuration. When performing menu adjustments, we will
use the following terminology to indicate the location of the desired function:
Setup Menu Section > Menu Item > Selection
Setup Menu Section is the uppermost Setup Menu level. There are six Setup Menu
sections listed in the left column of the Setup Menu screen. They are: Playback
Setup, Video Setup, Audio Format Setup, Audio Processing, Device Setup, and
Network Setup.
GOLDMUND EIDOS 36U+ – Universal Player -
17
8
8 8
8
SETTINGS (Ctd.)
SETTINGS (Ctd.)SETTINGS (Ctd.)
SETTINGS (Ctd.)
Menu Item is the parameter to be adjusted which appears in the center column of the
Setup Menu. Once you enter a Setup Menu Section, the list of Menu Items and their
current value are displayed in a box. Selection is the actual numeric or descriptive
element that represents the change being made to the selected parameter. It is the
item located to the right of its corresponding Menu Item.
A Scroll Icon appears at the top or bottom of the menu when there are more Menu
Items or Selections than what can fit in a screen. You may use the UP and DOWN
ARROW buttons to scroll the display in order to access additional items.
The diagram on the left should give a good description of the various elements and
their context. In this screen we could, for example, instruct you to set the Auto Play
Mode parameter to Off in the Playback Setup section.
To indicate where we were, you would see the following:
Playback Setup > Auto Play Mode > Off.
To exit the SETUP menu at any time, press the SETUP button on the remote
control or select Exit from the Setup Menu sections.
The settings are permanently saved when the player is turned off using either the
front panel power button or the remote control. If the AC power is interrupted before
the player enters standby status, the settings will not be saved. To ensure proper
saving of the SETUP menu settings, please turn off the player and turn it back on
after you make major changes to the SETUP menu options.
NOTE
NOTENOTE
NOTE
It is possible that some setup items may be grayed-out and inaccessible. This can be
caused by a disc being played back or having changed a prerequisite setup item.
Please stop playback or eject the disc before trying to change these setup items. If
you still cannot access the setup item, please check for configuration conflicts and
consistency. For example, if Video Setup > 3D Output is set to Off, the 3D Setting
menu item will be grayed-out. Setting 3D Output to On (or Auto) will enable the 3D
Setting menu.
GOLDMUND EIDOS 36U+ – Universal Player -
18
8
8 8
8
SETTINGS (Ctd.)
SETTINGS (Ctd.)SETTINGS (Ctd.)
SETTINGS (Ctd.)
Playback Setup
Playback SetupPlayback Setup
Playback Setup
The Playback Setup section is designed to configure playback preferences. The
setup items in this section are:
1. SACD Priority: Select which audio layer to play for SACD (Super Audio CD).
Multi-Channel Play the high resolution multi-channel surround audio layer
Stereo – Play the high resolution 2-channel stereo audio layer
CD Mode – Play the CD layer of a hybrid SACD disc
2. DVD-Audio Mode: Select which portion of a DVD-Audio disc to play.
DVD-Audio – Play the DVD-Audio portion of the disc with high-resolution audio.
DVD-Video Play the DVD-Video portion of the disc with Dolby Digital or DTS
audio.
3. Auto Play Mode: Select whether the player will start playing an audio CD or
SACD automatically.
On – The disc starts playing upon insertion into the player.
Off – The player waits for the user to start playback by pressing the PLAY button.
GOLDMUND EIDOS 36U+ – Universal Player -
19
8
88
8 SETTINGS (Ctd.)
SETTINGS (Ctd.)SETTINGS (Ctd.)
SETTINGS (Ctd.)
4. Auto Resume: Select whether disc playback will start from the previously saved
point or not. This setting applies to CDs, SACDs, DVDs and certain Blu-ray Discs.
On – Playback automatically starts from the previously saved point.
Off – Playback starts from the beginning.
5. Parental Control: Sets parental control ratings in order to prevent minors from
watching inappropriate content. This function depends on whether the disc has been
properly rated and encoded. Press the ENTER button to bring up the rating selection
menu.
Adjust the parental control settings by entering the current parental control password.
If you have not yet set a parental control password, default the password is “0000”.
The Parental Control Menu contains the following sub-items:
BD Ratings Press the UP/DOWN ARROW buttons to select the rating allowed
for Blu-ray Discs. Off means no ratings control and all discs are allowed to play.
Numbers 1 to 21 corresponds to the age limit. Discs encoded with an age limit that
is less than the selected age will be allowed, and any rating equal to or above the
selected age will be blocked.
DVD Ratings Press the UP/DOWN ARROW buttons to select the rating to
allow for DVDs. The available ratings are Kid, G, PG, PG-13, PGR, R, NC-17,
Adult and Off. These selected rating and above will be blocked, and any rating
below will be allowed. If Off is selected, all discs are allowed to play.
Area Code Some Blu-ray Discs may have different parental control ratings for
different geographical areas. At this time the player only supports parental control
ratings used in the United States.
Change Password To change the parental control password, enter a 4-digit
number as the new password. Enter the new password again to confirm. If the two
entries match, the new password replaces the old parental control password.
GOLDMUND EIDOS 36U+ – Universal Player -
20
8
8 8
8
SETTINGS (Ctd.)
SETTINGS (Ctd.)SETTINGS (Ctd.)
SETTINGS (Ctd.)
6. Language: Configures language preferences. This menu contains the following
sub-items:
Player Language Allows you to choose the language for the player’s Setup
Menu and the on-screen display. Currently the player supports 9 languages.
Disc Menu Language Allows you to choose the preferred language for
displaying DVD and Blu-ray Disc menus. If a disc menu of the selected language is
available, that menu will be shown instead of the default disc menu.
Audio Language Allows you to choose the preferred audio language for DVD
and Blu-ray Discs. If an audio track of the selected language is available on the
disc, the audio track will be played back.
Subtitle Language Allows you to choose the preferred subtitle language for
DVDs. If a subtitle of the selected language is available, it will be displayed. When
Auto is selected, the subtitle display is determined by the disc.
Video Setup
Video SetupVideo Setup
Video Setup
The Video Setup section of the Setup Menu allows you to configure video output
options.
1. Picture Adjustment: Adjusts picture control settings. The Eidos 36U+ provides a
wide array of picture controls. Please refer to the Picture Adjustment section on page
56 for details about each control.
2. Dual HDMI Output: Allows you to select the output mode when both HDMI Output
ports are in use. If only one HDMI Output is active, this selection will not apply.
Split A/V (recommended) Use HDMI 1 OUT as the dedicated video output port
and HDMI 2 OUT as the dedicated audio output port. This setting will ensure the
best possible picture quality and the highest possible audio resolution.
NOTE
NOTENOTE
NOTE
The player can automatically adjust the
resolution of digital audio and video signals
depending on the capabilities of the
connected television and receivers.
For HDMI 1 OUT, the dedicated QDEO
video processor will be used unless Source
Direct is selected, in which case QDEO is
bypassed.
In Split A/V mode, HDMI 1 OUT has video
only with no audio, but HDMI 2 OUT will
have audio and possibly video. This is
because HDMI embeds audio into video
data so there must always be a video signal,
even if it’s only a blank screen, to carry
audio through.
NOTE
NOTENOTE
NOTE
If your preferred language is not listed in the
Audio, Subtitle or Disc Menu options, select
“Other” and enter the Language provided by
your official Goldmund representative.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33

Goldmund EIDOS 36U+ User manual

Category
Blu-Ray players
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI