2. Computers & electronics
  3. Telecom & navigation
  4. Mobile phones
  5. Car kits
  6. Metra
  7. 86-3528
86-3528

Metra 86-3528 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Metra 86-3528 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2004 METRA ELECTRONICS CORPORATION
86-3528
INSTALLATION
INSTRUCTIONS
Pontiac GTO factory
Head Unit Removal
Keys
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2004 METRA ELECTRONICS CORPORATION
86-3528
INSTALLATION
INSTRUCTIONS
Pontiac GTO factory
Head Unit Removal
Keys
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2004 METRA ELECTRONICS CORPORATION
86-3528
INSTALLATION
INSTRUCTIONS
Pontiac GTO factory
Head Unit Removal
Keys
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2004 METRA ELECTRONICS CORPORATION
86-3528
INSTALLATION
INSTRUCTIONS
Pontiac GTO factory
Head Unit Removal
Keys
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2004 METRA ELECTRONICS CORPORATION
86-3528
INSTALLATION
INSTRUCTIONS
Pontiac GTO factory
Head Unit Removal
Keys
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2004 METRA ELECTRONICS CORPORATION
86-3528
INSTALLATION
INSTRUCTIONS
Pontiac GTO factory
Head Unit Removal
Keys
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2004 METRA ELECTRONICS CORPORATION
86-3528
INSTALLATION
INSTRUCTIONS
Pontiac GTO factory
Head Unit Removal
Keys
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2004 METRA ELECTRONICS CORPORATION
86-3528
INSTALLATION
INSTRUCTIONS
Pontiac GTO factory
Head Unit Removal
Keys
Disconnect the negative battery
terminal to prevent an accidental
short ciciut
1. Insert the Head Unit removal Keys into
the holes on either side of the factory head
unit.
2. Push the keys into the holes until the
retaining clips are released.
3. Grasp the keys tightly and pull the unit
from the dash cavity.
REV. 091604
Disconnect the negative battery
terminal to prevent an accidental
short ciciut
1. Insert the Head Unit removal Keys into
the holes on either side of the factory head
unit.
2. Push the keys into the holes until the
retaining clips are released.
3. Grasp the keys tightly and pull the unit
from the dash cavity.
REV. 091604
Disconnect the negative battery
terminal to prevent an accidental
short ciciut
1. Insert the Head Unit removal Keys into
the holes on either side of the factory head
unit.
2. Push the keys into the holes until the
retaining clips are released.
3. Grasp the keys tightly and pull the unit
from the dash cavity.
REV. 091604
Disconnect the negative battery
terminal to prevent an accidental
short ciciut
1. Insert the Head Unit removal Keys into
the holes on either side of the factory head
unit.
2. Push the keys into the holes until the
retaining clips are released.
3. Grasp the keys tightly and pull the unit
from the dash cavity.
REV. 091604
Disconnect the negative battery
terminal to prevent an accidental
short ciciut
1. Insert the Head Unit removal Keys into
the holes on either side of the factory head
unit.
2. Push the keys into the holes until the
retaining clips are released.
3. Grasp the keys tightly and pull the unit
from the dash cavity.
REV. 091604
Disconnect the negative battery
terminal to prevent an accidental
short ciciut
1. Insert the Head Unit removal Keys into
the holes on either side of the factory head
unit.
2. Push the keys into the holes until the
retaining clips are released.
3. Grasp the keys tightly and pull the unit
from the dash cavity.
REV. 091604
Disconnect the negative battery
terminal to prevent an accidental
short ciciut
1. Insert the Head Unit removal Keys into
the holes on either side of the factory head
unit.
2. Push the keys into the holes until the
retaining clips are released.
3. Grasp the keys tightly and pull the unit
from the dash cavity.
REV. 091604
Disconnect the negative battery
terminal to prevent an accidental
short ciciut
1. Insert the Head Unit removal Keys into
the holes on either side of the factory head
unit.
2. Push the keys into the holes until the
retaining clips are released.
3. Grasp the keys tightly and pull the unit
from the dash cavity.
REV. 091604
/