Fhiaba BI30B-LO Installation guide

Installation guide

Notice d’installation

Guía de instalación

www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)

3

www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)

1

1.1

1.2

IMPORTANT INSTRUCTIONS

Important safety instructions.....................................................................................................................................

Children safety................................................................................................................................................................

4

2

2.1

2.2

2.3

2.4

2.5

2.6

2.7

2.8

TECHNICAL REQUIREMENTS

Appliance features and installation requiremens................................................................................................

Installation niche features: Integrated Series.......................................................................................................

Installation niche features: StandPlus Series.......................................................................................................

Installation niche features: X-Pro Series................................................................................................................

Installation niche features: Classic..........................................................................................................................

Installation niche features: Brilliance-Integrated Series...................................................................................

Installation niche features: Brilliance-Classic.......................................................................................................

4

6

7

8

9

10

11

12

3

3.1

3.2

3.3

3.4

PREPARING THE INSTALLATION

Transport to installation site and unpacking.........................................................................................................

Electrical and Water connection................................................................................................................................

Energy: Alternatives and Home Automation.........................................................................................................

Levelling

13

14

15

4

4.1

4.2

4.3

4.4

4.5

NICHE DIMENSIONS

Niche Dimensions and Installation Styles: Integrated Series..........................................................................

Niche Dimensions and Installation Styles: StandPlus and X-Pro Series......................................................

Flush installation with standard aluminum trims...............................................................................................

Prominent installation with standard aluminum trims......................................................................................

Stand-Proud (for StandPlus and X-Pro series).....................................................................................................

15

16

17

5

5.1

5.2

5.3

5.4

5.5

5.6

5.7

5.8

5.9

5.10

5.11

5.12

PANELS MOUNTING

Decorative door and Bottom-Drawer panels layout............................................................................................

Decorative panels layout for fridge with one bottom-drawer.........................................................................

Decorative panels layout for fridge with two bottom-drawers......................................................................

Decorative panels layout for fridge with glass door and one bottom-drawer..........................................

Decorative panels layout for fridge with glass door and two bottom-drawers........................................

Decorative panels layout for fridge Column.........................................................................................................

Decorative panels layout for fridge column with glass door...........................................................................

Panels Dimensions Single Bottom - Drawer.........................................................................................................

Panels Dimensions Two Bottom - Drawers...........................................................................................................

Panels Dimensions Column Models.........................................................................................................................

Mounting the handles...................................................................................................................................................

Mounting panels to the door and the drawer........................................................................................................

17

19

20

21

22

23

24

25

26

27

28

6

6.1

6.2

6.3

INSTALLATION

Built-in installation of single appliance...................................................................................................................

Built-in installation of two or more appliances.....................................................................................................

Maximum cabinet depth over “Integrated” refrigerator with single door panel..........................................

30

32

7

7.1

7.2

7.3

7.4

7.5

COMPLETING THE INSTALLATION

Anti-tipping safety assembly......................................................................................................................................

Mounting the handles on stainless front................................................................................................................

Ventilation........................................................................................................................................................................

Post installation control...............................................................................................................................................

Start Up.............................................................................................................................................................................

33

35

INDEX

EN

4

www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)

1.1 Important safely instruction

Symbols used in the Guide:

Note

Tips for the correct use of the appliance

Important

Directions to avoid appliance damage

Warning

directions to prevent injury

1.2 Children safety

DANGER: Risk of child entrapment. Before you throw

away your old refrigerator or freezer:

> Take o the doors

> Leave the shelves in place so that children may not

easily climb inside.

Important!

Dimensions in parentheses are in inches.

Weights in parentheses are in pounds.

Temperatures in parentheses are

in Fahrenheit degrees.

1. IMPORTANT INSTRUCTIONS

Appliance

dimensions

Integrated

Series 449 / 18”

w: 449 mm (17 5/8”)

h: 2120 mm (83 1/2”)

d: 615 mm (24 1/4”)

Series 599 / 24”

w: 599 mm (23 5/8”)

h: 2120 mm (83 1/2”)

d: 610 mm (24”) /

615 mm (24 1/4”)

Series 749 / 30”

w: 749 mm (29 1/2”)

h: 2120 mm (83 1/2”)

d: 610 mm (24”) /

615 mm (24 1/4”)

Series 899 / 36”

w: 899 mm (35 3/8”)

h: 2120 mm (83 1/2”)

d: 610 mm (24”) /

615 mm (24 1/4”)

Appliance

dimensions

StandPlus

Series 599 / 24”

w: 599 mm (23 5/8”)

h: 2120 mm (83 1/2”)

d: 629 mm (24 3/4”)

Series 749 / 30”

w: 749 mm (29 1/2”)

h: 2120 mm (83 1/2”)

d: 629 mm (24 3/4”)

Series 899 / 36”

w: 899 mm (35 3/8”)

h: 2120 mm (83 1/2”)

d: 629 mm (24 3/4”)

Appliance

dimensions

X-Pro

Series 599 / 24”

w: 599 mm (23 5/8”)

h: 2120 mm (83 1/2”)

d: 635 mm (25”)

Series 749 / 30”

w: 749 mm (29 1/2”)

h: 2120 mm (83 1/2”)

d: 635 mm (25”)

Series 899 / 36”

w: 899 mm (35 3/8”)

h: 2120 mm (83 1/2”)

d: 635 mm (25”)

2.1 Appliance features and installation

requirements

2. TECHNICAL REQUIREMENTS

5

www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)

Appliance

dimensions

Classic

Series 599 / 24”

w: 599 mm (23 5/8”)

h: 2120 mm (83 1/2”)

d: 635 mm (25”)

Series 749 / 30”

w: 749 mm (29 1/2”)

h: 2120 mm (83 1/2”)

d: 635 mm (25”)

Series 899 / 36”

w: 899 mm (35 3/8”)

h: 2120 mm (83 1/2”)

d: 635 mm (25”)

Appliance

dimensions

Brilliance

-Integrated

Series 599 / 24”

w: 599 mm (23 5/8”)

h: 2120 mm (83 1/2”)

d: 610 mm (24”)

Series 749 / 30”

w: 749 mm (29 1/2”)

h: 2120 mm (83 1/2”)

d: 610 mm (24”)

Series 899 / 36”

w: 899 mm (35 3/8”)

h: 2120 mm (83 1/2”)

d: 610 mm (24”)

Appliance

dimensions

Brilliance-Classic

Series 599 / 24”

w: 599 mm (23 5/8”)

h: 2120 mm (83 1/2”)

d: 635 mm (25”)

Series 749 / 30”

w: 749 mm (29 1/2”)

h: 2120 mm (83 1/2”)

d: 635 mm (25”)

Series 899 / 36”

w: 899 mm (35 3/8”)

h: 2120 mm (83 1/2”)

d: 635 mm (25”)

Packaging

dimensions

Integrated /

Brilliance

Series 449 / 18”

w: 650 mm (25 5/8”)

h: 2260 mm (89”)

d: 800 mm (31 1/2”)

Series 599 / 24”

w: 650 mm (25 5/8”)

h: 2260 mm (89”)

d: 800 mm (31 1/2”)

Series 749 / 30”

w: 800 mm (31 1/2”)

h: 2260 mm (89”)

d: 800 mm (31 1/2”)

Series 899 / 36”

w: 950 mm (37,4”)

h: 2260 mm (89”)

d: 800 mm (31 1/2”)

Packaging

dimensions

StandPlus / X-Pro

Series 599 / 24”

w: 650 mm (25 5/8”)

h: 2260 mm (89”)

d: 800 mm (31 1/2”)

Series 749 / 30”

w: 800 mm (31 1/2”)

h: 2260 mm (89”)

d: 800 mm (31 1/2”)

Series 899 / 36”

w: 950 mm (37 3/8”)

h: 2260 mm (89”)

d: 800 mm (31 1/2”)

Weight with

packaging

Series 449 / 18”

up to 170 kg (375 lb)

Series 599 / 24”

up to 200 kg (441 lb)

Series 749 / 30”

up to 220 kg (485 lb)

Series 899 / 36”

up to 240 kg (529 lb)

Voltage AC 110 - 120V 60Hz

Power supply

cable

90° Nema 5-15P

Potable water

supply pressure

from 0.05 MPa to 0.5 MPa

(0.5 Bar - 5 Bar)

Water connection 3/4” NPT (1/4” elbow adap-

ter included)

Provided

installation

accessories

- Customized panels

mounting Kit

- Anti-tipping Kit (B04000200)

- Lateral connecting kit

(KCLIT/KCLIH)

- 4 mm (1/8”) allen wrench

Additional

equipment

necessary

- Phillips head screwdriver

- wood drill

- 2.5 mm (1/8”) bit for wood

- 8 mm (3/8”) bit for walls

- 17 mm (11/16”) wrench

- 19 mm (3/4”) wrench

EN

6

www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)

2.2 Installation niche features:

Integrated Series

A - area to be left clear for the anti-tipping brackets

Minimum Niche Height

2134 mm (84”)

Minimum Niche Width

S899 / FI36: 902 mm (35 1/2”)

S749 / FI30: 752 mm (29 5/8”)

S599 / FI24: 602 mm (23 3/4”)

Minimum Niche Depth

610 mm (24”) + panel thickness for ﬂush install

Door Swing Clearance

S899 / FI36: 1470 mm (57 7/8”)

S749 / FI30: 1320 mm (52”)

S599 / FI24: 1170 mm (46”)

Door Opening Angle

105°

Width

S899 / FI36: 899 mm (35 3/8”)

S899 / FI36: 749 mm (29 1/2”)

S899 / FI36: 599 mm (23 5/8”)

Height

2120 mm (83 1/2”) + 25 mm (1”)

Depth with door (without panel)

610 mm (24”)

Minimum distance from the wall (hinge side)

S899: 160 mm (6 1/4”)

S749: 125 mm (5”)

S599: 90 mm (3 1/2”)

2. TECHNICAL REQUIREMENTS

248 (9

¾”

)

+ 25 (1”)

330

(13”)

259

(10

¼”

)

min 2134 (84”)

A A

140 (5 ½”) 140 (5 ½”)

100 (4”)

S899 / FI36: 902 (35 ½”)

S599 /FI24: 602 (23 ¾”)

S749 / FI30: 752 (29 ⅝”)

610 (24”)

560 (22”)

610 (24”)

560 (22”)

1293 (50 ⅞” )

474

(18 ⅝”)

231 (9

⅛”

) +

25 (1”)

500 (19 ¾”)

248 (9

¾”

)

+ 25 (1”)

231 (9

⅛”

) +

25 (1”)

20 (¾”)

20 (¾”)10 (⅜”)

721 (28 ⅜”) +25 (1”)

2120 (83 ½”) +25 (1”)

846 (33 ¼”) +25 (1”)

2120 (83 ½”) +25 (1”)

1168(46”)

105°

560 (22”)

610 (24”)

899 / FI36: 899 (35 ⅜”)

749 / FI30: 749 (29 ½”)

599 / FI24: 599 (23 ⅝”)

10 (⅜”)

992 (39”)

899 / FI36: 1470 (57 ⅞”)

749 / FI30: 1320 (52”)

599 / FI24: 1170 (46”)

899 / FI36: 160 (6 ¼”)

749 / FI30: 125 (5”)

599 / FI24: 90 (3 ½”)

7

www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)

2.3 Installation niche features:

Integrated Series

A - area to be left clear for the anti-tipping brackets

Minimum Niche Height

2134 mm (84”)

Minimum Niche Width

S899 / FI36: 902 mm (35 1/2”)

S749 / FI30: 752 mm (29 5/8”)

S599 / FI24: 602 mm (23 3/4”)

S449 / FI18: 452 mm (17 3/4”)

Minimum Niche Depth

615 mm (24 1/4”) + panel thickness for ﬂush install

Door Swing Clearance

S899 / FI36: 1475 mm (58”)

S749 / FI30: 1325 mm (52 1/8”)

S599 / FI24: 1175 mm (46 1/4”)

S449 / FI18: 1025 mm (40 3/8”)

Door Opening Angle

105°

Width

S899 / FI36: 899 mm (35 3/8”)

S749 / FI30: 749 mm (29 1/2”)

S599 / FI24: 599 mm (23 5/8”)

S449 / FI18: 449 mm (17 5/8”)

Height

2120 mm (83 1/2”) + 25 mm (1”)

Depth with door (without panel)

615 mm (24 1/4”)

Minimum distance from the wall (hinge side)

S899: 160 mm (6 1/4”)

S749: 125 mm (5”)

S599: 90 mm (3 1/2”)

S449: 50 mm (1 7/8”)

EN

233 (9

¼”

)

+ 25 (1”)

min 2134 (84”)

A A

140 (5 ½”) 140 (5 ½”)

100 (4”)

S899 / FI36: 902 (35 ½”)

S449 / FI18: 452 (17 ¾”)

S599 / FI24: 602 (23 ¾”)

S749 / FI30: 752 (29 ⅝”)

615 (24 ¼”)

565 (22 ¼” )

1808 (71 ¼” )

231 (9

⅛”

) +

25 (1”)

505 (19 ¾”)

2120 (83 ½”) +25 (1”)

105°

S899 / FI36: 1475 (58”)

S749 / FI30: 1325 (52 ⅛”)

S599 / FI24: 1175 (46 ¼”)

S449 / FI18: 1025 (40

⅜

”)

565 (22 ¼”)

615 (24 ¼”)

S899 / FI36: 899 (35 ⅜”)

S749 / FI30: 749 (29 ½”)

S599 / FI24: 599 (23 ⅝”)

S449 / FI18: 449 (17 ⅝”)

10 (⅜”)

S899 / FI36: 160 (6 ¼”)

S749 / FI30: 125 (5”)

S599 / FI24: 90 (3 ½”)

S449 / FI18: 50 (1

⅞

”)

8

www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)

2. TECHNICAL REQUIREMENTS

2.4 Installation niche features:

StandPlus Series

A - area to be left clear for the anti-tipping brackets

Minimum Niche Height

2134 mm (84”)

Minimum Niche Width

MS899 / FM36: 902 mm (35 1/2”)

MS599 / FM24: 602 mm (23 3/4”)

Door Swing Clearance

MS899 / FM36: 1470 mm (57 7/8”)

MS599 / FM24: 1170 mm (46”)

Door Opening Angle

105°

Width

MS899 / FM36: 899 mm (35 3/8”)

MS599 / FM24: 599 mm (23 5/8”)

Height

2120 mm (83 1/2”) + 25 mm (1”)

Depth with door

629 mm (24 3/4”)

Minimum distance from the wall (hinge side)

MS899 / FM36: 230 mm (9”)

MS599 / FM24: 160 mm (6 1/4”)

Important!

If the units are to be installed inside a

niche or within an enclosed structure, it

is necessary to design a ventilation shaft

at the back of the niche to assure proper

ventilation at the back of the unit.

Cross-sectional chimney ventilation area

should equal 200cm² (31in²)

A A

140 (5 ½”) 140 (5 ½”)

100 (4”)

min 2134 (84”)

MS899 / FM36: 902 (35 ½”)

MS599 / FM24: 602 (23 ¾”)

560 (22”)

2120 (83 ½”) +25 (1”)

613 (24 ⅛”)+25 (1”)

629 (24 ¾”)

615 (24 ¼”)

666 (26 ¼”)

485 (19 ⅛”)

1296 (50”)

195 (7 ⅝”)

8 (⅜”)

128 (5)

+ 25 (1”)

min 10 (⅜”)

min 50 (2”)

105°

1010 (39 ¾”)

560 (22”)

MS899 / FM36: 899 (35 ⅜”)

MS599 / FM24: 599 (23 ⅝”)

10 (⅜”)

629 (24 ¾”)

37 (1 ½”)

69 (2 ¾”)

MS899 / FM36: 1470 (57 ⅞”)

MS599 / FM24: 1170 (46”)

MS899 / FM36: 230 (9”)

MS599 / FM24: 160 (6 ¼”)

9

www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)

2.5 Installation niche features:

X-Pro Series

A - area to be left clear for the anti-tipping brackets

Minimum Niche Height

2134 mm (84”)

Minimum Niche Width

XS899 / FP36: 902 mm (35 1/2”)

XS749 / FP30: 752 mm (29 5/8”)

XS599 / FP24: 602 mm (23 3/4”)

Door Swing Clearance

XS899 / FP36: 1470 mm (57 7/8”)

XS749 / FP30: 1320 mm (52”)

XS599 / FP24: 1170 mm (46”)

Door Opening Angle

105°

Width

XS899 / FP36: 899 mm (35 3/8”)

XS749 / FP30: 749 mm (29 1/2”)

XS599 / FP24: 599 mm (23 5/8”)

Height

2120 mm (83 1/2”) + 25 mm (1”)

Depth with door

635 mm (25 ”)

Minimum distance from the wall (hinge side)

XS899 / FP36: 230 mm (9”)

XS749 / FP30: 195 mm (7 3/4”)

XS599 / FP24: 160 mm (6 1/4”)

Important!

If the units are to be installed inside a

niche or within an enclosed structure, it

is necessary to design a ventilation shaft

at the back of the niche to assure proper

ventilation at the back of the unit.

Cross-sectional chimney ventilation area

should equal 200cm² (31in²)

EN

A A

140 (5 ½”) 140 (5 ½”)

100 (4”)

min 2134 (84”)

XS899 / FP36: 902 (35 ½”)

XS599 /FP24: 602 (23 ¾”)

XS749 / FP30: 752 (29 ⅝”)

560 (22”)

2120 (83 ½”) +25 (1”)

613 (24 ⅛”)+25 (1”)

635 (25”)

693 (27 ¼”)

516 (20 ⅜”)

1296 (50”)

195 (7 ⅝”)

8 (⅜”)

97 (3 ⅞”)

+ 25 (1”)

1016 (40”)

XS899 / FP36: 1470 (57 ⅞”)

XS749 / FP30: 1320 (52”)

XS599 / FP24: 1170 (46”)

560 (22”)

75 (3”)

XS899 / FP36: 899 (35 ⅝”)

XS749 / FP30: 749 (29 ½”)

XS599 / FP24: 599 (23 ⅝”)

10 (⅜”)

58 (2 ¼”)

105°

635 (25”)

XS899 / FP36: 230 (9”)

XS749 / FP30: 195 (7 ¾”)

XS599 / FP24: 160 (6 ¼”)

min 10 (⅜”)

min 50 (2”)

10

www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)

2. TECHNICAL REQUIREMENTS

2.6 Installation niche features:

Classic Series

A - area to be left clear for the anti-tipping brackets

Minimum Niche Height

2134 mm (84”)

Minimum Niche Width

899 / FK36: 902 mm (35 1/2”)

749 / FK30: 752 mm (29 5/8”)

599 / FK24: 602 mm (23 3/4”)

Minimum Niche Depth

650 mm (25 5/8”)

Door Swing Clearance

899 / FK36: 1470 mm (56 1/2”)

749 / FK30: 1320 mm (50 5/8”)

599 / FK24: 1170 mm (46”)

Door Opening Angle

105°

Width

899 / FK36: 899 mm (35 3/8”)

749 / FK30: 749 mm (29 1/2”)

599 / FK24: 599 mm (23 5/8”)

Height

2120 mm (83 1/2”) + 25 mm (1”)

Depth with door

635 mm (25 ”)

Minimum distance from the wall (hinge side)

899 / 36: 230 mm (9”)

749 / 30: 195 mm (7 3/4”)

599 /24: 160 mm (6 1/4”)

A A

140 (5 ½”) 140 (5 ½”)

100 (4”)

min 2134 (84”)

899 / FK36: 902 (35 ½”)

749 / FK30: 752 (29 ⅝”)

2120 (83 ½”) +25 (1”)

732 (28 ⅞”)+25 (1”)

599 / FK24: 602 (23 ¾”)

560 (22”)

693 (27 ¼”)

45 (1 ¾”)

1378 (54 ¼”)

9 ( ⅜”)

637 (25 ⁄”)

96 (3 ¾”)

635 (25”)

105°

899 / FK36: 1470 (57 ⅞”)

749 / FK30: 1320 (52”)

599 / FK24: 1170 (46”)

560 (22”)

635 (25”)

899 / FK36: 899 (35 ⅜”)

749 / FK30: 749 (29 ½”)

599 / FK24: 599 (23 ⅝”)

10 (⅜”)

75 (3”)

58 (2 ¼”)

899 / FK36: 230 (9”)

749 / FK30: 195 (7 ¾”)

599 / FK24: 160 (6 ¼”)

1016 (40”)

11

www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)

2.7 Installation niche features:

Brilliance-Integrated Series

A - area to be left clear for the anti-tipping brackets

Minimum Niche Height

2134 mm (84”)

Minimum Niche Width

899 / BI36: 902 mm (35 1/2”)

749 / BI30: 752 mm (29 5/8”)

Minimum Niche Depth

610 mm (24”) + panel thickness for ﬂush install

Door Swing Clearance

899 /BI36: 1435 mm (56 1/2” in)

749 / BI30: 1285 mm (50 5/8” in)

Door Opening Angle

105°

Width

899 /BI36: 899 mm (35 3/8”)

749 / BI30: 749 mm (29 1/2”)

Height

2120 mm (83 1/2”) + 25 mm (1”)

Depth with door (without panel)

610 mm (24”)

Minimum distance from the wall (hinge side)

899 /BI36: 160 mm (6 1/4”)

749 / BI30: 125 mm (5”)

2. TECHNICAL REQUIREMENTS

EN

105°

560 (22”)

610 (24”)

899 / BI36: 899 (35 ⅜”)

749 / BI30: 749 (29 ½”)

10 (⅜”)

992 (39”)

899 / BI36: 1470 (57 ⅞”)

749 / BI30: 1320 (52”)

899 / BI36: 160 (6 ¼”)

749 / BI30: 125 (5”)

A A

140 (5 ½”) 140 (5 ½”)

100 (4”)

min 2064 (81 ¼”)

899 / BI36: 902 (35 ½”)

749 / BI30: 752 (29 ⅝”)

610 (24”)

560 (22”)

1293 (50 ⅞” )

474

(18 ⅝”)

231 (9

⅛”

) +

25 (1”)

500 (19 ¾”)

248 (9

¾”

)

+ 25 (1”)

20 (¾”)

721 (28 ⅜”) +25 (1”)

2120 (83 ½”) +25 (1”)

12

www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)

2.8 Installation niche features:

Brilliance-Classic Series

A - area to be left clear for the anti-tipping brackets

Minimum Niche Height

2134 mm (84”)

Minimum Niche Width

899 / BKI36: 902 mm (35 1/2”)

749 / BKI30: 752 mm (29 5/8”)

Minimum Niche Depth

650 mm (25 5/8”)

Door Swing Clearance

899 / BKI36: 14 mm (56 1/2” in)

749 / BKI30: 1285 mm (50 5/8” in)

Door Opening Angle

105°

Width

899 / BKI36: 899 mm (35 3/8”)

749 / BKI30: 749 mm (29 1/2”)

Height

2120 mm (83 1/2”) + 25 mm (1”)

Depth with door

635 mm (25 ”)

Minimum distance from the wall (hinge side)

899 / BKI36: 230 mm (9”)

749 / BKI30: 195 mm (7 3/4”)

A A

140 (5 ½”) 140 (5 ½”)

100 (4”)

min 2134 (84”)

899 / BKI36: 902 (35 ½”)

749 / BKI30: 752 (29 ⅝”)

2120 (83 ½”) +25 (1”)

635 (25”)

560 (22”)

693 (27 ¼”)

1378 (54 ¼”)587 (23 ⅛”)

146 (5 ¾”)

+ 25(1”)

9 ( ⅜”)

732 (28 ⅞”)+25 (1”)

105°

899 / FK36: 1470 (57 ⅞”)

749 / FK30: 1320 (52”)

560 (22”)

635 (25”)

899 / FK36: 899 (35 ⅜”)

749 / FK30: 749 (29 ½”)

10 (⅜”)

75 (3”)

58 (2 ¼”)

899 / FK36: 230 (9”)

749 / FK30: 195 (7 ¾”)

1016 (40”)

13

www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)

3.1 Transport to installation site

and unpacking

The appliance is very heavy.

Take maximum care during handling

to avoid injury.

The appliance should always be

transported in an erect position.

Avoid at all costs leaning it on its front

side.

Since this is a large and heavy appliance, before trans-

porting the appliance, check the access to the loca-

tion where it will be installed (door size, manoeuvring

space in stairwells, etc.).

The appliance is attached to the base of the packaging

(pallet) through four bolts which can be removed us-

ing a 19 mm (3/4”) wrench.

It is recommended to use a manual transporting de-

vice to move the appliance to the installation site, and

only at this point to remove the base of the packaging.

The appliance should always be transported in an

erect position.

If this is not possible, transport the appliance laying

on its rear side.

Once at the installation site, the appliance, which is

equipped with four wheels, can be taken o the pallet

and positioned in the installation area.

Operate as follows:

> Take o the four boltshsecuring [ 1 ] the appliance to

the pallet by means of a 19 mm (3/4”) wrench or socket.

> Remove the ﬁxing brackets [ 3 ] and [ 4 ] .

> To release the front ﬁxing bracket [ 3 ] , unscrew the

rear wheel adjusting bolt [ 2 ] by means of a 13 mm

(1/2”) wrench or socket. Avoid straining this bolt at its

stop points one way or the other so as to not damage

the rear leveling system.

Ensure the front leveling legs are retracted so that all

4 wheels are able to contact the ﬂoor for easiest ma-

neuvering.

> From the back of the unit and by means of a suit-

able, high duty hand trolley, take o the appliance and

place it on the ﬂoor.

Be very careful to avoid any damage to ﬂoors. Delicate

ﬂoors should be protected with plywood, hard card-

board or similar material panels.

3. PREPARING THE INSTALLATION

3.2 Electrical and Water connection

The Built-in filter cannot make it safe to

drink any water which is not suitable for

human consumption.

The appliance should be connected only

to a potable water supply system.

Do not use extension cords or adapters.

Once the appliance is fully installed, con-

nected to the water supply (if applicable)

and operational, in the event that the wa-

ter supply must be turned off, (touch the

button

on control panel to disable the

ice maker) before the main water is shut

off to prevent the appliance from entering

a ‘NO WATER IN’ alarm state.

The appliances are delivered from the factory for op-

eration at 110V-120V AC - 60Hz (US and Canada).

They are provided with a suitable supply cable and

plug to be connected to an appropriate 15A socket

providing an eective grounding.

A dedicated 15A circuit breaker should also be in-

stalled and should be easily accessible so that it can

be easily switched o before performing any installa-

tion or maintenance.

To connect to the water supply system (for appliances

equipped with ice makers) a 1/4” waterline with ac-

cessible shut-o valve must be supplied.

The appliance is provided with a water adapter elbow

which is suitable for the recommended water pres-

sure and complies the applicable food and water reg-

ulations..

The water ﬁlter cartridge, which is provided with the

appliance, should be installed according to the ac-

companying instructions. The solenoid connection on

the appliance is 3/4” diameter but is metric threaded

(NPT). A standard garden hose threaded connector

such as a braided stainless hose found at typical hard-

ware stores will strip or damage the solenoid threads.

It is recommended to use only the supplied 1/4” quick

connect elbow adapter for connecting a 1/4” copper

EN

1

4

1

2

3

EW

E W

EW

E W

14

www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)

or polyethylene source water line to the appliance.

Do not use extension cords and/or mul-

tiple adapters for the power supply con-

nection.

ELECTRICAL AND WATER SUPPLY

BEHIND THE UNIT

INTEGRATED AND

BRILLIANCE SERIES:

STANDPLUS AND

X-PRO SERIES:

3.3 Energy: Alternatives and Home Auto-

mation

If energy is supplied through an alternative en-

ergy power source (solar, geothermal, etc..) or

if home automation systems are installed with

carrier signals in the power lines, it may be nec-

essary to install an isolation transformer (not

supplied) to prevent interference with the appli-

ance’s electronics.

INTEGRATED AND BRILLIANCE SERIES:

ﬁg.1 Back of appliance

Operate as follows:

> Unwind the electric cable and connect it directly to

the wall socket.

> Make sure the appliance is in the Stand-by con-

dition and that all lights are o; should it be not so

press the Unit button

to switch it o.

X-PRO AND STANDPLUS SERIES:

Operate as follows:

> Unwind the electric cable and connect it directly to

the wall socket.

> Make sure the appliance is in the Stand-by con-

dition and that all ights are o; should it be not so

press the Unit button

to switch it o.

ﬁg.2 Back of appliance

ﬁg.3 Front of appliance

Water connection

Electrical connection

Water connection

E

W

E

W

1

15

www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)

3.4 Levelling

Adjust the appliance level by means of the front

levelling feet and the rear adjustable wheels.

Operate as follows:

> If necessary, remove the bottom plinth or grille

(it is kept in position by magnets), adjust the

height of the levelling feet [ 1 ] by means of a 17

mm (11/16”) wrench.

> Then adjust the height of the rear wheels by

turning the front adjusting bolts [ 2 ] clockwise

(raise) or counter-clockwise as it may be re-

quired.

Take care if using a power driver for this and

lower the clutch to prevent damaging the leveling

mechanism.

> Remount the bottom plinth or grille.

4.1 Niche Dimensions and Installation

Styles: Integrated Series

A - KCLITU: Lateral connection Kit (included)

B - KCCITU: Central connection Kit

(not included - must be ordered as a separate

accessory)

FI36

FI30

FI24

FI18

897 (35 1/4”)902 (35 1/2”)

752 (29 5/8”)

602 (23 3/4”)

452 (17 3/4”)

747 (29 3/8”)

447 (17 5/8”)

597 (23 1/2”)

Panels WidthNiche

Series

> Firmly tighten with ﬁngers - a tool / wrench should

not be needed to

make a proper seal. Turn on the water and ensure all

connections are not leaking prior to pushing the unit

into the niche.

4. NICHE DIMENSIONS

EN

1

2

1

2

FI24: 602 (23 ¾”)

FI30: 752 (29 ⅝”)

FI36: 902 (35 ½”)

FI18: 452 (17 ¾”)

CCB

16

www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)

4.2 Niche Dimensions and Installation

Styles: StandPlus and X-Pro Series

Stand-Proud

KCLXB: Lateral connection Kit

(not included - must be ordered as a separate ac-

cessory)

4.3 Flush installation with standard

aluminum trims

4.4 Prominent installation with standard

aluminum trims

A - KCLITU: Lateral connection Kit

B - KCCITU: Central connection Kit

(for side-by-side installations)

(not included - must be ordered as a separate

accessory)

A

6,5 (¼”)

A

6,5 (¼”)

10 (3⁄8”)

A - KCLITU: Lateral connection Kit (included)

B - KCCITU: Central connection Kit

(for side-by-side installations)

(not included - must be ordered as a separate

accessory)

902 (35 1/2”)

752 (29 5/8”)

602 (23 3/4”)

914 (36”

)

762

(30”)

610 (24”)

36

30

24

MAXMIN

Series

NICHE

24: 610 (24”)

30: 762 (30”)

36: 914 (36”)

17

www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)

INTEGRATED SERIES

5.1 Decorative door and Bottom-Drawer

panels layout

The dimensions of the panels are indicated in the

table and drawings on subsequent pages.

Nevertheless, according to the requirements for

aligning with other kitchen structures, the door

panel can be higher than the upper edge of the

refrigerator door, and the drawer panel can be

lower than the edge of the drawer.

The panels must be mounted using special bra-

ckets which attach to adjustable devices provided

on the door and drawer and with brackets that

anchor and adjust the panel’s vertical direction.

Brackets and fixing screws are provided with the

appliance and must be applied to the panel as in-

dicated.

Operate as follows:

To prepare the panels to be mounted on the ap-

pliance, follow these steps, working on the back

of the panel.

Door Panel

> Draw a vertical center line on the panel from

top to bottom

1 ].

> Starting from the bottom edge of the panel,

mark the positioning of the brackets [ 2 ].

5. PANELS MOUNTING

4.5 Stand-Proud (for StandPlus and

X-Pro series)

Niche 610 mm (24”)

KCLXB: Lateral connection Kit

(not included - must be ordered as a separate

accessory)

25 (1”)

20 (

¾”

)

15 (

5⁄8”

)

10 (

3⁄8”

)

610 (24”)

2

1

EN

18

www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)

> Following the corresponding table, mark the

external and then the internal hole [ 3 ].

> Position the brackets on each set of marks to

make sure they are aligned [ 4 ], if you choose to

drill small pilot holes for the screws pay special

attention to not pass through the panel entirely.

[ 5 ].

> Screw the brackets in place [ 6 ].

Drawer Panel

> When preparing the Drawer Panel, follow the

same instructions as per the door panel, but

make sure measurements are taken starting

from the top edge

[ 7 ].

The height-adjustment support brackets are

oriented the opposite way

[ 8 ] (note imgs 4 and

8).

8

7

65

4

3

9

> Prepare the appliance door (and drawer(s) if

applicable) for panel mounting by threading the

shoulder bolts into the recessed receivers and

the set screws into the other hole

[ 9 ]. Ensure

the end with the hex key socket is threaded into

the door and not on the visible end. Thread this

in far enough that it is flush with appliance door

face so as not to interferece with hanging the pa-

nel. You will adjust these later.

5. PANELS MOUNTING

19

www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)

5.2 Decorative panels layout for Fridge

with one bottom-drawer

Holes positions:

SERIES 899 / 36” SERIES 749 / 30” SERIES 599 / 24”

A 897 (35 1/4”) 747 (29 3/8”) 597 (23 1/2”)

B 417 (16 3/8”) 342 (13 1/2”) 276.5 (10 7/8”)

C 354.5 (14”) 279.5 (11”) 203.5 (8”)

EN

A

BB

A

BB

C C

13 (½”)

34 (1

3⁄8”)

6,5 (

¼”) 6,5 (¼”)

34 (1

3⁄8”)

1273 (50 1⁄8”)

1163 (45

¾”)

660 (26”)

157 (6

¼”)

min 1390 (54

¾”)max 635 (25”)

507.5 (20”)

382 (15

1⁄8”)

100 (4”)

20

www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)

SERIES 899 / 36” SERIES 749 / 30”

A 897 (35 1/4”) 747 (29 3/8”)

B 417 (16 3/8”) 342 (13 1/2”)

C 354.5 (14”) 279.5 (11”)

5.3 Decorative panels layout

for Fridge with two bottom-drawers

Holes positions:

5. PANELS MOUNTING

A

min 1265 (49 ¾”)

1160 (45

5⁄8”)

1044 (41

1⁄8”)

600 (23

5⁄8”)

268 (10

½”)

292,5 (11

½”)

183 (7

¼”)

73 (2

7⁄8”)

66 (2

5⁄8”) 157 (6 ¼”)

337 (13

¼”)max 415 (16 3⁄8”)

13 (½”)

34 (1

3⁄8”)

6,5 (¼”) 6,5 (¼”)

BB

C C

BB

Page is loading ...

Fhiaba BI30B-LO Installation guide

This manual is also suitable for

Fhiaba BI30B-LO Installation guide

in other languages

Related papers

Other documents