RAB Lighting RMKPANEL1X4 Operating instructions

RAB Lighting
Brand
RAB Lighting
Model
RMKPANEL1X4
Type
Operating instructions

RAB Lighting RMKPANEL1X4 is a recessed drywall kit designed for indoor ceiling applications. It features a 12 5/8" x 48 5/8" cut-out opening and is suitable for both insulated and non-insulated sheet rock ceilings. The kit includes four pieces that assemble with screws and can be supported by hanger wires or screwed to wood blocking or black iron. The pre-installed clips bend flat to the PANEL 1X4 Housing, which can be rotated and slid into place through the drywall opening. RMKPANEL1X4 is suitable for damp locations and requires a vapor barrier rated for 90° C.

RAB Lighting RMKPANEL1X4 is a recessed drywall kit designed for indoor ceiling applications. It features a 12 5/8" x 48 5/8" cut-out opening and is suitable for both insulated and non-insulated sheet rock ceilings. The kit includes four pieces that assemble with screws and can be supported by hanger wires or screwed to wood blocking or black iron. The pre-installed clips bend flat to the PANEL 1X4 Housing, which can be rotated and slid into place through the drywall opening. RMKPANEL1X4 is suitable for damp locations and requires a vapor barrier rated for 90° C.

INSTRUCTIONS
RMKPANEL1X4 - RECESSED DRYWALL KIT INSTALLATION
RAB Lighting is committed to creating high-quality, aordable, well-designed and energy-ecient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
RAB xtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is
required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
WARNING: Make certain power is OFF before installing the xture. No user serviceable parts inside.
SAFETY INSTRUCTIONS
RMKPANEL1X4
Easy Answers
rablighting.com
Visit our website for product info
Tech Help Line
Call our experts: 888 722-1000
e-mail
Answered promptly - [email protected]
Free Lighting Layouts
Answered online or by request
© 2020 RAB LIGHTING Inc.
Northvale, New Jersey 07647 USA
RAB WARRANTY: RAB’s warranty is subject to all terms and conditions found at rablighting.com/warranty.
Note: These instructions do not cover all details or variations in equipment nor do they
provide for every possible situation during installation, operation or maintenance.
RMKPANEL1X4 IN - 1120
DRYWALL MOUNTING
Fig. 1
The xture is suitable only for INDOOR RECESSED CEILING
application. Nominal sheet rock cut-out opening is
12 5/8” x 48 5/8”.
To mount in an insulated or non-insulated sheet rock ceiling follow
the steps below.
1. Assemble the four pieces of the Drywall Kit 1X4 with the
screws provided as shown in Fig 1.
2. Support the Drywall Kit 1x4 to the building structure by
Hanger Wires (by others), alternatively screw to Wood
Blocking (by others) or black iron (by others).
3. Bend the pre-installed Clips (4) at to the PANEL 1X4 Housing.
4. Follow wiring directions on xture installation instruction
sheet to complete electrical splices.
5. Rotate and slide the PANEL 1X4 Housing as required to t
through the drywall opening as indicated by the directional
arrow in gure and place it on the Drywall Kit.
WARNING: Risk of re or electric shock. Suitable for damp locations.
WARNING: Install Drywall Kit & Panel per local codes. Suitable for
installation in Sheet Rock/ Plasterboard in both Insulated Ceilings
and Non-Insulated Ceilings. Not for continuous row mounting.
WARNING: Do not handle energized fixture when hands are wet,
when standing on wet or damp surfaces, or in water.
WARNING: Vapor barrier must be suitable for 90° C.
WARNING: Drywall kit to be independently supported to
building structure.
PANEL 1X4 Housing
(available upon request)
Clip
Drywall Kit 1X4
Hanger Wires (by others)
Drywall Kit 1X4
Order CAT# RMKPANEL1X4
Drywall Kit 1X4
Wood Blocking (by others)
5"5"
73359-RAB
  • Page 1 1

RAB Lighting RMKPANEL1X4 Operating instructions

RAB Lighting
Brand
RAB Lighting
Model
RMKPANEL1X4
Type
Operating instructions

RAB Lighting RMKPANEL1X4 is a recessed drywall kit designed for indoor ceiling applications. It features a 12 5/8" x 48 5/8" cut-out opening and is suitable for both insulated and non-insulated sheet rock ceilings. The kit includes four pieces that assemble with screws and can be supported by hanger wires or screwed to wood blocking or black iron. The pre-installed clips bend flat to the PANEL 1X4 Housing, which can be rotated and slid into place through the drywall opening. RMKPANEL1X4 is suitable for damp locations and requires a vapor barrier rated for 90° C.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents