DRAG HARROW 12593
• Lay harrow onto ground and stretch out flat.
• Rounded heads of carriage bolts on top.
• Check all fasteners to ensure they are tight.
• Fasten [ES-078] item # 1 quick link onto chain at any desired position to pull
harrow straight or at angles.
• Additional weight may be added to unit by placing 8’’concrete
blocks along front as shown in figure above.
Hold down straps may be necessary to secure blocks into place.
• After [ES078] quick link is in desired position hook link into the hole
of your atv’s hitch plate.
1
2
3
5
8
Item No. Description Part #
1 QUICK LINK ES078
2 6 ‘ CHAIN ES083
3 3/16’’ CHAIN CONNECTOR ES077
4 HARROW PLATE 6800TK
5 ¼-20 NYLOCK NUT NB180
6 FLAT WASHER NB274
8 4’ X 5’ X 9-GA. LINK FENCE ES082
7 ¼-20 X 1.5’’ CARRIAGE BOLT NB583
8’’ concrete blocks
And hold down straps
Can be purchased at any lawn & garden center
3
6
7
4
13141
Swisher Mower & Machine
1602 Corporate Drive
Warrensburg, MO 64093
1-800-222-8183
Made In China