Swisher 12593 Owner's manual

DRAG HARROW 12593

• Lay harrow onto ground and stretch out flat.

• Rounded heads of carriage bolts on top.

• Check all fasteners to ensure they are tight.

• Fasten [ES-078] item # 1 quick link onto chain at any desired position to pull

harrow straight or at angles.

• Additional weight may be added to unit by placing 8’’concrete

blocks along front as shown in figure above.

Hold down straps may be necessary to secure blocks into place.

• After [ES078] quick link is in desired position hook link into the hole

of your atv’s hitch plate.

Item No. Description Part #

1 QUICK LINK ES078

2 6 ‘ CHAIN ES083

3 3/16’’ CHAIN CONNECTOR ES077

4 HARROW PLATE 6800TK

5 ¼-20 NYLOCK NUT NB180

6 FLAT WASHER NB274

8 4’ X 5’ X 9-GA. LINK FENCE ES082

7 ¼-20 X 1.5’’ CARRIAGE BOLT NB583

8’’ concrete blocks

And hold down straps

Can be purchased at any lawn & garden center

13141

Swisher Mower & Machine

1602 Corporate Drive

Warrensburg, MO 64093

1-800-222-8183

Made In China