QUICK START GUIDE
UNPACKING.
Carefully remove the player from the
packaging. Remove the tape securing the disc
door flap. Press the “OPEN” button
and carefully remove the optic protection card.
Close the disc lid when not in use.
DO NOT TOUCH THE OPTICAL LENS WITH
YOUR FINGERS. ANY GREASE OR DUST
WILL IMPARE THE PLAYERS
PERFORMANCE.
Remove any packaging from the Battery and
place the battery into the player.
Connect the DC Mains adaptor to the player
and the mains socket..
Wait until the battery condition Led shows
GREEN.
The battery will now be fully charged.
Do not use the player while charging the
battery, this increases the battery charging
time.
REMOTE CONTROL.
Place the battery into the remote control
FIRST TIME USE
When the battery is fully charged, press the
“POWER” button.
The screen will light up and display an Akura
Logo. Press the “OPEN” button, carefully open
the disc lid and place a good disc with its label
side “UP”, or facing you, onto the table centre.
Do not touch the disc surface, hold the disc
with your fingers holding the outer edge of the
disc
Close the disc lid and press the “PLAY” button.
The disc will start to spin and the display will
show either a disc menu or start to play
automatically.
You may also use the remote control for this
operation
For all other control functions, safety and
connection details, please see the main
Instruction Booklet.
WARNING. Do NOT defeat the safety
interlocks to observe the laser light. Laser
light is dangerous and may harm your
eyesight.
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Panasonic RCCD600 Operating instructions
-
-
Hitachi PDV313 User manual
-
Audiophase CD-330R User manual
-
-
-
-
COBY electronic TF-DVD7307 - DVD Player - 3.5 User manual
-
Toshiba A210 (PSAELC-JA308C) User guide
-
