Bartscher 130140 Operating instructions

Type
Operating instructions

Bartscher 130140 is a hand blender holder designed to save time and provide flexibility in the kitchen. It streamlines food shredding, pureeing, and heating during mixing. The holder is adjustable to fit pots with a maximum diameter of 600 mm and can accommodate various Bartscher motor blocks and blenders. Its adjustable position and angle settings allow for precise control during use, enhancing efficiency and ease of use.

Bartscher 130140 is a hand blender holder designed to save time and provide flexibility in the kitchen. It streamlines food shredding, pureeing, and heating during mixing. The holder is adjustable to fit pots with a maximum diameter of 600 mm and can accommodate various Bartscher motor blocks and blenders. Its adjustable position and angle settings allow for precise control during use, enhancing efficiency and ease of use.

600
130140
Original-Gebrauchsanleitung
V1/1118
- 5 -
Technical data
Name
Hand blender holder 600
Code no.:
130140
Material:
Stainless steel
Model:
blender diameter: 25 x 40 mm
max. pot size: 600 mm
properties: position and angle adjustable
Dimensions:
W 255 x D 625 x H 70 mm
Weight:
1.18 kg
We reserve the right to implement technical modifications!
Properties
The use of the blender holder provides significant savings on time and flexibility of
work in the kitchen. The hand blender holder aids in the shredding of food, making
puree and heating them during mixing.
The installation and removal of the pot grip is simple. It may be attached to pots
having a maximum diameter of 600 mm.
The hand blender holder is designed to fit in with the following motor blocks and
blenders:
130130 130133
130131 130134
130132 130135
130136
GB/UK
- 6 -
List of parts
1
Pot grip
2
Pot size adjustment bar
3
Feet (4x)
4
Pot size set screw
5
Blender holder
6
Blender set screw
7
Angle adjustment set screw
4
7
5
2
1
3
- 7 -
Mounting the blender holder on
the pot / mounting the blender
Adjustment of blender position
and angle
Place the pot grip (1) on a suitable pot
and shift the adjustment bar to suit the
pot size (2), so that the pot grip is
adjusted to the pot size. Tighten the pot
size set screw (4).
Install a suitable blender in the holder (5)
and tighten it with the set screw (6).
To set the blender position in the pot,
move the movable part on the central
pot grip bar to the required position.
If needed, change the blender angle by
slightly unscrewing the set screw (7).
Set the required angle and in the end
retighten the set screw (7).
CAUTION!
Never change the blender angle during operation. First turn off the device!
- 8 -
Cleaning
Disconnect the blender.
Unscrew the set screw (6) of the blender holder, remove the blender from the holder.
Clean the blender holder regularly at the end of your work day (more often, if needed)
with a soft, moist cloth and gentle cleaning agent. Afterwards, thoroughly dry the
blender holder.
Bartscher GmbH phone: +49 5258 971-0
Franz-Kleine-Str. 28 fax: +49 5258 971-120
33154 Salzkotten Service-Hotline: +49 5258 971-197
Germany www.bartscher.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Bartscher 130140 Operating instructions

Type
Operating instructions

Bartscher 130140 is a hand blender holder designed to save time and provide flexibility in the kitchen. It streamlines food shredding, pureeing, and heating during mixing. The holder is adjustable to fit pots with a maximum diameter of 600 mm and can accommodate various Bartscher motor blocks and blenders. Its adjustable position and angle settings allow for precise control during use, enhancing efficiency and ease of use.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI