Traxxas Maxx Operating instructions

Type
Operating instructions

Traxxas Maxx: Conquer any terrain with this high-performance monster truck. Experience extreme power and speed with its innovative design, featuring a waterproof, self-righting system and a powerful brushless motor for unmatched acceleration. Get ready for adrenaline-pumping action and hours of thrilling adventures.

Traxxas Maxx: Conquer any terrain with this high-performance monster truck. Experience extreme power and speed with its innovative design, featuring a waterproof, self-righting system and a powerful brushless motor for unmatched acceleration. Get ready for adrenaline-pumping action and hours of thrilling adventures.

Center Differential Assembly Installation Instructions
TRAXXAS.com
Traxxas, 6250 Traxxas Way, McKinney, TX 75070,
Phone: 972-549-3000, Fax: 972-549-3011, e-mail: [email protected]
KC2749-R00 Rev 190930
Installation:
Tip: Refer to the exploded views included with the model
to assist with installation.
1. Flip the chassis upside down and remove the 4x20 CCS
(4) and 3x10 CS (4) from the center skid plate; remove the
4x10 CCS (4) from the rear skid plate (Fig. A)
2. Flip the chassis back on its wheels and remove the 4x16
BCS (2) that attach the wheelie bar to the rear skid plate
(Fig. B).
3. Remove both the center and rear skid plates (Fig. C).
4. Remove the 4x12 BCS (1) from the rear suspension pin
retainer and tie bar (Fig. D); remove the two parts from
the rear lower bulkhead (Fig. E).
5. Release both suspension arms from the front suspension
pin retainer and tie bar (pins can remain in suspension
arms).
6. Remove the 4x12 BCS (2) from the front suspension pin
retainer and tie bar (Fig. F). Remove the two parts from
the rear lower bulkhead (Fig. G).
7. Remove the 4x12 BCS (10) from the rear lower bulkhead
(Fig. H).
8. Remove the rear lower bulkhead to access and remove
the existing center differential assembly (Fig. I).
Reuse the ball bearings, the driveshaft adapter, and
the 3x10 screw pin for installation of the new center
differential assembly (Fig. J).
9. Installation of the new center differential assembly is the
reverse of removal.
Tools needed:
• 2.5mm hex wrench
Visitez Traxxas.com/manuals pour télécharger
les instructions dans votre langue.
Visite la página Traxxas.com/manuals para
descargar el instrucciones en su idioma.
Auf Traxxas.com/manuals, können Sie
anleitung in Ihrer Sprache downloaden.
Fig. A
Fig. B Fig. C
Fig. D
Fig. E
Fig. F Fig. G
Covers Part #8980
Fig. H
Fig. I
Fig. J
Center SkidplateRear Skidplate
Wheelie Bar
Rear Suspension
Pin Retainer/Tie Bar
Front Suspension
Pin Retainer/Tie Bar
Rear Lower
Bulkhead
Center Dierential
Assembly
  • Page 1 1

Traxxas Maxx Operating instructions

Type
Operating instructions

Traxxas Maxx: Conquer any terrain with this high-performance monster truck. Experience extreme power and speed with its innovative design, featuring a waterproof, self-righting system and a powerful brushless motor for unmatched acceleration. Get ready for adrenaline-pumping action and hours of thrilling adventures.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI