1
FPD-21 Series
FPD-21 Series
Product Guide
CONTEC CO.,LTD.
Be sure to read the “IPC Precaution List” and “ User’s manual” before using this product.
Unpacking
Unpacking the contents carefully. Save and store all of the packing materials and boxes in case the FLAT
PANEL DISPLAY is shipped in the future. Check the contents to make sure that you have everything
listed below. If anything is missing , please contact CONTEC.
This Product Include
FPD-M21VT-AC
FPD-L21ST-AC
FPD-H21XT-AC
Name
Pcs.
Pcs.
Pcs.
Flat panel display
1
1
1
Three-point sems screws (M3 x 6)
1
1
1
Cable fixed clamp
3
3
3
The attachment fittings
6
6
8
Warranty Certificate
1
1
1
EU Declaration of Conformity
－
－
1
IPC Precaution List
1
1
1
Ferrite Core
1
1
3
Ferrite Core fixed clamp
－
－
2
Product guide (this sheet)
1
1
1
Serial number nabel
1
1
－
Notes Users manual and cable are not include.
Option Available
The more details information about option should look at Web.
Model
Description
FPD-21-HMJ
User’s manual (Japanese)
FPD-21-HMU
User’s manual (English)
IPC-CBL3-2
RS-232C Cable for touch panel (2m)
IPC-CBL3-5
RS-232C Cable for touch panel (5m)
IPC-ACCODE3
AC power cable (2m, 125VAC)
IPC-CV
Screen protection sheet for IPC-DT/M61VT (10 Sheets)
IPC-CV12
Screen protection sheet for IPC-DT/L61SVT (10 Sheets)
IPC-CV15
Screen protection sheet for IPC-DT/H61XT (10 Sheets)
IPC-SLIB-01
Touch Panel Driver & Utility Software for WINDOWS
* For the latest information on the option, refer to the CONTEC’s Web site.
FPD-21 Series Product Guide
Copyright 2007 CONTEC CO., LTD. ALL RIGHTS RESERVED.
CONTEC CO., LTD. September 2014 Edition
3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan
Japanese http://www.contec.co.jp/
English http://www.contec.com/ A-51-523 (LYHR664)
Chinese http://www.contec.com.cn/ 07312014_rev4 [12052007]
No part of this document may be copied or reproduced in any form by any means without prior written
consent of CONTEC CO., LTD.
Recommended cable made by SANWA SUPPLY. INC.
Model
Description
KC-V2 (2m)
Analog display cable (2m)
KC-V5 (5m)
Analog display cable (5m)
KU20-2H
USB Cable for touch panel (2m)
KU20-5H
USB Cable for touch panel (5m)
Limited One Year Warranty
CONTEC FLAT PANEL DISPLAY is warranted by CONTEC to be free from defects in material and
workmanship for up to one year from the date of purchase by the original purchaser.
Replacement or repair will be free of charge only when this device is returned to CONTEC freight
prepaid with an original invoice.
This warranty is not applicable for scratches or normal wear, but only for the electronic circuitry and
original boards. The warranty is not applicable if the device has been tampered with or damaged through
abuse, mistreatment, neglect, or unreasonable use, or if the original invoice is not included, in which
case repairs will be considered beyond the warranty policy. If a replacement with a new device is
needed, regular factory prices will be charged, the product will be returned to you COD, and no other
written warranty will apply.
The obligation of the warrantor is solely to repair or replace the product. In no event will the warrantor
be liable for any incidental or consequential damages due to such defect or consequences that arise from
inexperienced usage, misuse, or malfunction of this device.
How to Obtain Service
For replacement or repair, return the device freight prepaid, with a copy of the original invoice. Please
obtain a Return Merchandise Authorization number (RMA) from our Sales Administration Department
before returning any product. No Product will be accepted without an RMA number.
/
