Liberty 840204 Installation guide

Type
Installation guide

This manual is also suitable for

9-13 lbs
Hinges Hinges Hinges Hinges
36" tall
14-26 lbs
56" tall
32
27-37 lbs
80" tall
4 5
38-50 lbs
92" tall
20" Wide
PartsList
• Two Face Frame Concealed HInges
• Four #6x5/8" Flat Head Screws
• Two #8x1" Pan Head Wood Screws
RecommendedTools
• #2 Phillips Screwdriver
• Pencil or Scribe
• Metric Ruler
• Drill and 1/8" or 3/32" Drill bit for pilot holes
• Boring Bit 35mm (Forstner Bit) for hinge cup
Data
• See chart below for recommended number of
hinges per door size
• If hanging a door with a mirror or very wide door
you will need additional hinges
• Door thickness should be 5/8" (16mm) or
3/4" (19mm)
1-1/4"OverlayFaceFrameConcealedHinge
Opening105°
840Series
105°
140 Business Park Drive • Winston-Salem, NC 27107
www.libertyhardware.com
1-800-542-3789
CP5217-XXX-01 06/06/12©2012 Liberty Hardware Manufacturing Corporation, A MASCO COMPANY
Wear Safety Goggles
Portez des lunettes de sécurité
Utilice gafas protectoras
3.InstallingDoortoCabinet
a. Open hinge to full extension
b. Connect door to cabinet as shown, B
4.DoorAdjustment
Align door using following adjustment feature.
a. Lateral Adjustment allows for adjusting
door plus or minus 1.5mm side to side.
b. Horizontal Adjustment allows for adjusting
door plus or minus 1.5mm in and out.
c. Vertical Adjustment allows for adjusting
door plus or minus 2.5mm up and down.
MountingInstructions
45
mm
35
mm
3
mm
9.5
mm
2.InstallingHingetoDoor
a. Drill hole 12mm (15/32") deep for hinge cup
using 35mm boring bit. Do not drill through
door face.
b. Drill pilot holes for screws. Do not drill through
door face: 12mm deep hole for Screws.
c. Insert hinge into door, A
3/32" dia hole
1.MarkingDrillHolesforHinge
a. Mark location of holes on cabinet door and
frame.
a
b
c
A B
  • Page 1 1
  • Page 2 2

Liberty 840204 Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI