Addonics Technologies DGC11 User manual

Brand
Addonics Technologies
Model
DGC11
Type
User manual

Addonics Technologies DGC11 is a versatile and powerful DVD Duplicator designed to meet the demands of various duplication tasks. With its ability to handle multiple formats, including DVD±R/RW, DVD±R DL, and DVD-RAM, it provides users with a comprehensive solution for their duplication needs.

The DGC11 features 11 destination trays, allowing for simultaneous duplication of up to 11 copies at once, significantly increasing productivity and efficiency. The intuitive LCD display and user-friendly interface make it easy to navigate and control the duplication process.

Addonics Technologies DGC11 is a versatile and powerful DVD Duplicator designed to meet the demands of various duplication tasks. With its ability to handle multiple formats, including DVD±R/RW, DVD±R DL, and DVD-RAM, it provides users with a comprehensive solution for their duplication needs.

The DGC11 features 11 destination trays, allowing for simultaneous duplication of up to 11 copies at once, significantly increasing productivity and efficiency. The intuitive LCD display and user-friendly interface make it easy to navigate and control the duplication process.

www.addonics.com
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v6.1.11
T E C H N O L O G I E S
User Guide
DigiCopier XI
(DGC11)
Auxiliary
Power Switch
Source tray
Destination tray 1
Destination tray 2
Destination tray 3
LCD Panel
Destination tray 4
Destination tray 5
Destination tray 6
Destination tray 7
Destination tray 8
Destination tray 9
Destination tray 10
Destination tray 11
www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
There are four buttons and an LCD on the panel of DigiCopier
VII.
1 – LCD shows a function or a message.
2 – it is used to scroll up function menus.
3 – it is used to scroll down function menus.
4 – it is used to execute a function.
5 – it is used to cancel a function.
II. Connecting the power cable and turning on the
DigiCopier VII
a. Connect the power cord provided from the wall outlet to the
back of the DigiCopier VII.
b.
A main power switch is located at the back of the tower. Turn
the switch on. Another auxiliary power switch is located on
the front of the tower.
III. Steps for the Copying Process
Note: may not able to copy-protected DVD or CD.
Step 1
Turn on the DigiCopier VII by
pressing the auxiliary power switch.
Step 2 Insert media you wish to
duplicate into the source tray on the
top.
www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Step 3 Populate the destination trays
with blank CDs or DVD media. A
rewritable DVD containing old data can
also be use, but the old data will be
automatically erased.
Step 4 After the DVD-ROM and DVD
writers detect DVDs, press ENT button
to start copying.
LCD will show the copying information as follows.
When copying is in progress, MB and time will decrease while
the percentage of completion will increase. “MB” means the size
of data that you want to copy.
When copying comes to an end, LCD will show the results as
follows. The DVDs that were successfully copied will eject
automatically.
The complete user manual of the DVD Duplicator can found in
the Driver Disk under User Guides or can be downloaded from
http://www.addonics.com/support/user_guides/
www.addonics.com
Phone: 408-573-8580
Fax: 408-573-8588
Email: http://www.addonics.com/sales/query/
CONTACT US
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Addonics Technologies DGC11 User manual

Brand
Addonics Technologies
Model
DGC11
Type
User manual

Addonics Technologies DGC11 is a versatile and powerful DVD Duplicator designed to meet the demands of various duplication tasks. With its ability to handle multiple formats, including DVD±R/RW, DVD±R DL, and DVD-RAM, it provides users with a comprehensive solution for their duplication needs.

The DGC11 features 11 destination trays, allowing for simultaneous duplication of up to 11 copies at once, significantly increasing productivity and efficiency. The intuitive LCD display and user-friendly interface make it easy to navigate and control the duplication process.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents